Infineon

XMC4800E196K2048AAXQMA1 - 144MHz Cortex-M4 MCU | Infineon

부품 번호: XMC4800E196K2048AAXQMA1 ✓ 활성
3.3 V Vdss PG-LFBGA-196-2, 196 pins Package 144 MHz Speed 2 MB (2M x 8 bit) Memory
MOQ: 1 |

XMC4800E196K2048AAXQMA1 개요

Infineon Technologies XMC4800E196K2048AAXQMA1 is a 32-bit Arm Cortex-M4 microcontroller rated up to 144 MHz, with 2 MB of flash memory, integrated Ethernet, and a 196-pin PG-LFBGA-196-2 package. It is designed for industrial automation, connected control, and communications equipment requiring deterministic real-time control alongside a networked system interface.

An industrial microcontroller is a semiconductor device that executes embedded control firmware, reads sensor and process inputs, and controls actuators or communications hardware. The XMC4000 family combines an Arm Cortex-M4 processor core with embedded peripherals and Ethernet connectivity in a single integrated circuit, reducing the component count needed for industrial network nodes.

Key characteristics include a 144 MHz maximum clock, 2,048 kB of flash, 32-bit processing, and an operating supply identified as 3.3 V. The target ordering code is associated with the PG-LFBGA-196-2 package and tray presentation. Its 196-ball land pattern provides a high pin count suitable for extensive peripheral connections and Ethernet implementation, but it also requires a dense, carefully routed PCB layout.

The architecture follows the Arm Cortex-M4 processor model and targets embedded real-time workloads. At 144 MHz, the core provides substantially more instruction throughput than lower-frequency general-purpose control devices, while the integrated Ethernet interface allows network communication without requiring a separate controller. Exact RAM capacity, peripheral inventory, Ethernet details, voltage tolerances, and temperature limits must be confirmed in the manufacturer documentation before schematic release.

Typical applications include industrial Ethernet controllers, programmable automation equipment, networked sensors, motor and motion-control systems, industrial gateways, and embedded communications equipment. The combination of local real-time processing and Ethernet connectivity is especially useful where control decisions must occur locally while status, configuration, and diagnostic data are exchanged over a network.

PCB implementation should prioritize short return paths for supply and ground, controlled clock routing, and careful assignment of high-speed Ethernet signals. The LFBGA-196 footprint demands adequate escape routing and multilayer-board planning; verify the manufacturer pinout, ball map, exposed-pad requirements, and recommended stack-up before releasing artwork. Provide local decoupling according to the device power architecture and use simulation or measurement to confirm Ethernet signal integrity.

This page combines the exact ordering information, key device characteristics, sourcing workflow, replacement guidance, and application-focused design considerations. It also distinguishes confirmed manufacturer information from parameters that require engineering confirmation, helping teams move efficiently from component selection to a manufacturable industrial-control design.

드롭인 대체품: XMC4800E196K2048AAXQMA1 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 제품에는 사용 가능한 드롭인 대체품이 없습니다.

대체품 요청

XMC4800E196K2048AAXQMA1 최대 정격 & 전기적 특성

Product Type 32-bit microcontroller
Processor Core Arm Cortex-M4
Architecture ARM 32-bit
최대 클록 주파수 144 MHz
Flash Memory 2 MB (2M x 8 bit)
동작 공급 전압 3.3 V
Ethernet Support Integrated Ethernet
Core Count 1 core
Application Class Industrial
패키지 PG-LFBGA-196-2, 196 pins
Package Family LFBGA
실장 유형 Surface mount
Packaging Tray

XMC4800E196K2048AAXQMA1 lfbga 핀 구성 가이드

XMC4800E196K2048AAXQMA1(lfbga 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

XMC4800E196K2048AAXQMA1의 lfbga 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: XMC4800E196K2048AAXQMA1.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

XMC4800E196K2048AAXQMA1 적합 용도: 6 애플리케이션s: Industrial Ethernet Automation Controller, Networked Sensor Gateway, Programmable Automation Controller, Motor and Motion Control System, Industrial Communication Gateway, Connected Test and Measurement Equipment.

🏭

Industrial Ethernet Automation Controller

The XMC4800E196K2048AAXQMA1 fits an industrial Ethernet automation node because it combines a 144 MHz Arm Cortex-M4 core, 2 MB of flash, and integrated Ethernet in one device. The processor can execute real-time control and diagnostics while the network interface carries configuration, status, and process data. Its 196-pin LFBGA package also provides more signal connections than a compact MCU, supporting sensors, local I/O, and communications circuitry. Design the PCB with short Ethernet routes, continuous ground references, and closely placed decoupling. Confirm the exact MAC, PHY, and external-interface requirements in the manufacturer documentation before finalizing the schematic.

🧩

Networked Sensor Gateway

The XMC4800E196K2048AAXQMA1 is appropriate for a gateway that must acquire local sensor information and forward it over Ethernet. At up to 144 MHz, the Cortex-M4 core can service multiple communication tasks, apply filtering, and maintain deterministic timing for critical measurements. The 2 MB of flash provides room for firmware, protocol handlers, and configuration logic. Use the broad 196-pin package to connect digital sensors, local status inputs, and external transceivers, but preserve uninterrupted ground and power planes for reliable Ethernet performance. Firmware partitioning should isolate real-time acquisition from network traffic to avoid unpredictable control latency.

🔧

Programmable Automation Controller

The XMC4800E196K2048AAXQMA1 supports programmable automation equipment that combines deterministic machine control with supervisory networking. Its 144 MHz Arm Cortex-M4 core provides substantial processing capacity for sequencing, state machines, and diagnostics, while 2 MB of flash supports a larger embedded application than a basic control MCU. The 196-pin LFBGA-196-2 package accommodates field-bus, digital I/O, analog interfaces, and communications connections without relying on a separate host processor. Keep high-current actuator drive paths away from sensitive logic, use separate decoupling branches, and validate timing margins across the full operating-temperature range before production release.

🤖

Motor and Motion Control System

The XMC4800E196K2048AAXQMA1 can serve as the central controller in a connected motor-control system because its 144 MHz Cortex-M4 core is suited to frequent control-loop computation. The available package connectivity supports encoders, current and position sensing, digital commands, and network supervision. Integrated Ethernet allows drive parameters, fault information, and operating data to be exchanged with a controller or service interface. The design must verify timer channels, encoder interfaces, analog front ends, and electrical limits against the exact device documentation. Keep switching-node and motor-drive circuitry physically separated to reduce noise coupling into the MCU and Ethernet sections.

🌐

Industrial Communication Gateway

The XMC4800E196K2048AAXQMA1 is well suited to an industrial gateway that translates between embedded control functions and Ethernet-based supervisory systems. Its 2 MB flash capacity accommodates protocol stacks, routing logic, logging, and remote configuration, while the 144 MHz core supports concurrent communication workloads. The 196-pin package provides enough connection density for multiple serial, digital, and network-facing interfaces. In the PCB, route Ethernet differential pairs as controlled impedance traces, maintain uninterrupted reference planes, and place termination and magnetic-interface components according to the selected network design. Firmware should include watchdog recovery, communication retry handling, and safe restart behavior.

📺

Connected Test and Measurement Equipment

The XMC4800E196K2048AAXQMA1 can coordinate a networked industrial test or measurement instrument because it combines a 144 MHz control processor, 2 MB of program storage, and Ethernet connectivity. Local sequencing, instrument control, and result processing can run on the Cortex-M4 core while the network interface supports remote configuration and data transfer. Its high-pin-count LFBGA package provides flexible access to sensors, memory, and peripheral interfaces. Preserve analog-signal separation, use independent filtering for sensitive rails, and validate Ethernet timing under the intended operating system and traffic load. The advantage over a small MCU is integration, while the cost is higher PCB and assembly complexity.

What are the key specifications of XMC4800E196K2048AAXQMA1?
The XMC4800E196K2048AAXQMA1 is a single-core 32-bit Arm Cortex-M4 industrial microcontroller with a maximum clock frequency of 144 MHz, 2 MB of flash memory, 3.3 V operation, integrated Ethernet, and a PG-LFBGA-196-2 package. According to the Infineon manufacturer product page, it belongs to the XMC4800 family and is configured with 2048 kB of program memory. The 196-pin package exposes substantially more connectivity than a typical small-outline microcontroller, making it suitable for industrial equipment requiring both local real-time control and Ethernet communication.
Where can I download the XMC4800E196K2048AAXQMA1 datasheet?
The official documentation is available through the Infineon product page for XMC4800-E196K2048-AA, which provides the manufacturer datasheet, parameters, and ordering information. Use that document to confirm the complete 196-ball pinout, electrical limits, memory map, Ethernet characteristics, clock requirements, and PCB recommendations. The distributor listing also identifies the exact orderable suffix as PG-LFBGA-196-2. Review the manufacturer documentation rather than relying on abbreviated catalog entries when assigning power, ground, analog, and Ethernet balls in the PCB schematic.
What is the operating voltage of XMC4800E196K2048AAXQMA1?
The XMC4800E196K2048AAXQMA1 is identified as a 3.3 V microcontroller in the manufacturer and distributor product records. This nominal operating supply must be separated from the device's complete electrical limits before schematic approval. Confirm minimum and maximum core, analog, and I/O supply voltages, as well as allowable sequencing and tolerance, in the manufacturer datasheet. Multiple supply domains and internally regulated rails may require dedicated filtering or decoupling even though the primary catalog description identifies 3.3 V operation.
How much flash memory does XMC4800E196K2048AAXQMA1 have?
The XMC4800E196K2048AAXQMA1 contains 2 MB, or 2,048 kB, of flash memory, represented in the product listing as 2M x 8 bit. Infineon describes the related XMC4800-E196K2048-AA configuration as an industrial Cortex-M4 device with 2048 kB of flash. This capacity supports embedded firmware, network stacks, parameter storage, and application logic. Confirm the boot map, option-byte configuration, flash endurance, programming procedure, and available RAM in the manufacturer documentation before finalizing the firmware architecture.
Is XMC4800E196K2048AAXQMA1 suitable for industrial Ethernet control?
The XMC4800E196K2048AAXQMA1 is suitable for industrial Ethernet control because it combines a 144 MHz Arm Cortex-M4 core, 2 MB of flash, and integrated Ethernet in one microcontroller. According to the Infineon product page, this is an industrial XMC4800 configuration designed for Ethernet-connected applications. It is well suited to programmable automation equipment, networked sensors, and industrial gateways where real-time control and network communication must coexist. Confirm the exact Ethernet MAC, PHY, media interface, and timing parameters in the datasheet before board-level design.
What can replace the XMC4800E196K2048AAXQMA1?
A true drop-in replacement for the XMC4800E196K2048AAXQMA1 must preserve the 196-pin PG-LFBGA-196-2 land pattern, pin functions, 144 MHz performance class, 2 MB flash configuration, supply architecture, Ethernet implementation, and firmware behavior. No distinct substitute with verified pin compatibility is identified in the available cross-reference records. Same-family Infineon XMC4800 variants may share the processor and peripherals but can differ in flash density, temperature grade, package code, or ordering suffix. Treat those variants as design-review candidates until the manufacturer documents confirm exact drop-in status.
What is the best Infineon equivalent for XMC4800E196K2048AAXQMA1?
The closest verified Infineon equivalent is the base XMC4800-E196K2048-AA industrial ordering designation, which identifies the same 144 MHz Cortex-M4 architecture, 2048 kB flash, Ethernet capability, and 196-pin device family. The full XMC4800E196K2048AAXQMA1 order code adds package, temperature, quality, or delivery information through its suffix structure. Before substituting the base designation in a BOM, verify the exact package code, temperature range, flash configuration, and production-grade requirements in Infineon ordering information.
Where can I buy XMC4800E196K2048AAXQMA1 and what is its lead time?
Use the Request a Quote form on this page to request current availability, MOQ, lead time, and a unit quotation for XMC4800E196K2048AAXQMA1. The exact ordering code is cataloged in tray presentation, and the manufacturer identifies it as an industrial 144 MHz Cortex-M4 device with Ethernet. Lead time can vary with the selected delivery quantity and current factory conditions, so obtain a supply confirmation for the exact suffix before committing the design to a production schedule.
What is the price of XMC4800E196K2048AAXQMA1?
The current unit quotation for XMC4800E196K2048AAXQMA1 should be requested through the Request a Quote form on this page. The product is a 144 MHz, 2 MB-flash Arm Cortex-M4 microcontroller in a 196-pin LFBGA package, so its commercial value depends on quantity, delivery packaging, and factory availability. The platform does not present a static price in this technical description because pricing and stock status can change independently of the component's electrical characteristics.
Is XMC4800E196K2048AAXQMA1 in stock?
Current stock for XMC4800E196K2048AAXQMA1 should be confirmed through the Request a Quote form on this page. The device is an industrial 196-pin LFBGA microcontroller with a 144 MHz Arm Cortex-M4 core, 2 MB of flash, and integrated Ethernet. Supply status can differ by package suffix and order quantity, so provide the exact full MPN, target quantity, and delivery location when requesting an availability and lead-time confirmation.
When should I choose XMC4800E196K2048AAXQMA1 instead of a smaller microcontroller?
Choose the XMC4800E196K2048AAXQMA1 when the design needs local real-time processing together with integrated Ethernet and enough I/O capacity for industrial equipment. Its 144 MHz Cortex-M4 core and 2 MB flash are more substantial than a small general-purpose microcontroller, while the 196-pin LFBGA footprint provides extensive connectivity. The trade-off is higher PCB complexity, greater routing and assembly demands, and a larger board area than a leaded or small-outline device. A smaller MCU is preferable when Ethernet and extensive peripheral routing are unnecessary.
Is XMC4800E196K2048AAXQMA1 suitable for motor control and automation?
The XMC4800E196K2048AAXQMA1 is suitable for motor-control and automation designs that combine deterministic embedded control with Ethernet communications. Its 144 MHz Arm Cortex-M4 core supports responsive control-loop execution, and the 196-pin package exposes a broad interface set for sensors, actuators, and communications. Infineon classifies the XMC4800-E196K2048-AA configuration as an industrial microcontroller. Validate timer, analog, encoder, and motor-interface requirements against the detailed peripheral list before selecting it for a specific control topology.
XMC4800E196K2048AAXQMA1 vs XMC4800-E196K2048-AA: what is the difference?
The XMC4800-E196K2048-AA is the manufacturer's base industrial device designation, while XMC4800E196K2048AAXQMA1 is the complete ordering code used for procurement. The manufacturer description associates the base designation with an Arm Cortex-M4 processor, 144 MHz operation, 2048 kB of flash, Ethernet, and a 196-pin package. The added suffix characters communicate exact package, temperature, quality, and delivery attributes. They should not be treated as interchangeable without checking the manufacturer ordering table for the specific PCB and production requirements.
What design constraints matter for the XMC4800E196K2048AAXQMA1 PCB?
The principal PCB constraint is the 196-pin LFBGA-196-2 footprint, which requires multilayer escape routing, fine-pitch assembly capability, and careful treatment of supply and ground connections. Place decoupling capacitors close to the relevant power balls and keep high-speed clock and Ethernet routes short and continuous. Because this device combines a 144 MHz processor with network communications, return-path continuity and reference-plane planning are important. Use the manufacturer pinout and layout guidance to confirm exposed-pad, thermal, and test-point requirements before fabrication.
Is XMC4800E196K2048AAXQMA1 compliant with RoHS and REACH?
RoHS and REACH status for XMC4800E196K2048AAXQMA1 must be confirmed from the current Infineon product documentation or material-compliance declaration for the exact ordering code. The available manufacturer and distributor descriptions confirm the device's industrial Arm Cortex-M4 configuration but do not explicitly state its substance-compliance status. For a released production design, request the applicable declaration and record the result in the product environmental compliance documentation rather than inferring compliance from the manufacturer name or package description.

엔지니어링 참조 데이터: XMC4800E196K2048AAXQMA1 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose XMC4800E196K2048AAXQMA1 when the design requires a 144 MHz Arm Cortex-M4 core, 2 MB of embedded flash, integrated Ethernet, and a high-density 196-pin industrial package. It is a strong fit for automation controllers, networked sensors, motor-control systems, and industrial gateways where local real-time processing and communications must be combined. Choose a smaller microcontroller when Ethernet, extensive I/O, and the 2 MB code space are unnecessary, because the LFBGA-196-2 footprint requires more sophisticated PCB and assembly resources. The base XMC4800-E196K2048-AA designation is useful for identifying the underlying industrial configuration, but it should not replace the full order code until package, temperature, flash, and delivery attributes are verified. No distinct drop-in replacement with verified pin compatibility is currently established, so any substitution requires manufacturer documentation and a complete PCB, firmware, and lifecycle review.

대체품과의 비교

파라미터 이 제품
Package PG-LFBGA-196-2
Brand Infineon Technologies
Processor Core Arm Cortex-M4
Maximum Clock Frequency 144 MHz
Flash Memory 2 MB
Operating Supply Voltage 3.3 V
Ethernet Support Integrated Ethernet
Core Count 1 core
Application Class Industrial
Programming and Delivery Tray

주요 차별점

  • Integrated real-time control and network connectivity (vs XMC4800-E196K2048-AA)
  • High-frequency Cortex-M4 processing (vs XMC4800-E196K2048-AA)
  • Substantial embedded program memory (vs XMC4800-E196K2048-AA)

설계 노트

Plan the XMC4800E196K2048AAXQMA1 layout as a high-density mixed-signal design rather than as a generic 196-ball digital package. Use the manufacturer ball map and land pattern to escape power, ground, clock, and communications nets through the shortest practical routes. A multilayer stack-up generally provides the best routing options, but the final layer count, via geometry, and assembly process must be validated against the package drawing and fabrication capabilities. Preserve symmetry and adequate clearances around fine-pitch signal escapes.

Separate the MCU's supply paths from noisy external loads and place local high-frequency decoupling directly at the appropriate power balls. The device operates from a 3.3 V supply according to the product description, but the complete power architecture and tolerance must be taken from the manufacturer documentation. Confirm startup, current transients, internal regulator relationships, and sequencing before assigning rail names in the schematic. Use adequate copper area and via distribution where the package provides multiple supply and ground connections.

Treat Ethernet and clock signals as controlled-impedance nets when the board implementation includes them. Route differential Ethernet pairs together over a continuous reference plane, minimize vias and stubs, and place any required termination according to the complete interface design. Keep switching regulators, high-current actuator outputs, and magnetic-interface components away from sensitive clock and data paths. Validate the final layer stack and termination network with signal-integrity analysis if cable length, edge rate, or industrial noise conditions are demanding.

Do not substitute the base XMC4800-E196K2048-AA designation or another XMC4800 suffix without checking every orderable attribute. Flash density, package code, temperature range, quality level, and delivery form can differ even when the core and Ethernet descriptions look identical. Also avoid treating the 196-pin package as a simple upgrade path from a smaller MCU: ball assignment, exposed-pad requirements, clock support, and peripheral functions may prevent a board-level drop-in replacement.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The exact material-compliance and automotive qualification statements for this ordering code are not stated in the manufacturer and distributor product descriptions. Confirm the applicable Infineon declarations before production release.

데이터 검증일: 2026-11-16 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

XMC4800E196K2048AAXQMA1 datasheet XMC4800E196K2048AAXQMA1 pinout XMC4800E196K2048AAXQMA1 datasheet pdf XMC4800E196K2048AAXQMA1 specifications XMC4800E196K2048AAXQMA1 equivalent XMC4800E196K2048AAXQMA1 replacement XMC4800E196K2048AAXQMA1 price XMC4800E196K2048AAXQMA1 stock Infineon XMC4800E196K2048AAXQMA1 XMC4800 144MHz Cortex-M4 microcontroller XMC4800E196K2048AAXQMA1 LFBGA-196 XMC4800E196K2048AAXQMA1 industrial Ethernet XMC4800E196K2048AAXQMA1 buy

관련 부품 & 용어

Infineon Technologies XMC4800E196K2048AAXQMA1 XMC4800-E196K2048-AA XMC4800 XMC4000 Arm Cortex-M4 ARM 32-bit architecture industrial microcontroller embedded microcontroller microcontroller semiconductor 2 MB flash memory 144 MHz 3.3 V integrated Ethernet PG-LFBGA-196-2 LFBGA BGA package family surface-mount package industrial automation industrial Ethernet controller motor control networked sensor gateway real-time control programmable automation controller
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기