IFX007TAUMA1 vs BTS3011TEATMA1 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci IFX007TAUMA1 disebabkan oleh Infineon dan BTS3011TEATMA1 disebabkan oleh Infineon. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | IFX007TAUMA1 | BTS3011TEATMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Motor Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Half-Bridge Motor Driver (H-Bridge half) | Smart Low-Side Power Switch |
| Tetstruktur | High-side P-MOSFET + Low-side N-MOSFET with integrated driver | — |
| Supply Voltage Range | 5.5 V to 40 V | — |
| Continuous Load Current | 40 A (typical application) | 10 A |
| MOSFET RDS(on) (typical) | 12.8 mΩ (per switch) | — |
| Logic Input HIGH (IN high) | 1.6 V to 2.0 V | — |
| Logic Input LOW (IN low) | 1.1 V to 1.3 V | — |
| PWM Frequency (max) | 25 kHz | — |
| Gambaran Suhu Operasi | -40 °C to +150 °C (junction) | — |
| Protection Features | Over-temperature, over-current latch, under-voltage lockout, short-circuit | — |
| Status Output | Yes (open-drain fault flag) | — |
| Current Sensing | Integrated via low-side RDS(on) sensing (no shunt required) | — |
| Kemasan | PG-TO263-7-1 (D2PAK-7) with exposed thermal tab | PG-TO252-5 (DPAK-5) |
| Kiraan Pin | 7 + Tab | — |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Aras MSL | 3 (per JEDEC J-STD-020) | — |
| Status RoHS | Compliant | Compliant |
| Automotive Qualification | AEC-Q100 qualified (per product family) | — |
| Number of Channels | — | 1 |
| On-Resistance R_DS(on) (typ.) | — | 11 mΩ |
| Operating Voltage Range | — | 3 V to 28 V |
| Switch Technology | — | N-channel vertical power MOSFET |
| Input Type | — | Logic-level CMOS compatible |
| Bilangan Pin | — | 5 (4 + Tab) |
| Suhu Hubungan Operasi | — | -40 °C to +150 °C |
| ESD Protection (HBM) | — | ±8 kV (output pin) |
| AEC-Q100 Qualification | — | Grade 1 qualified |
| Integrated Protections | — | Current limit, overtemperature shutdown, overvoltage clamp, ESD, ground-loss protection |
| Diagnostic Output | — | Open-drain status feedback pin |