LM224DG vs LM324DG Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci LM224DG disebabkan oleh onsemi dan LM324DG disebabkan oleh onsemi. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | LM224DG | LM324DG |
|---|---|---|
| Merek | onsemi | onsemi |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Quad operational amplifier | — |
| Number of Channels | 4 circuits | 4 channels |
| Amplifier Type | General-purpose operational amplifier | Single-supply quad operational amplifier with true differential inputs |
| Gain-Bandwidth Product | 1 MHz | 1 MHz |
| Supply Voltage Range | 3 V to 32 V | 3 V to 32 V |
| Input Offset Voltage | 5 mV | 5 mV to 7 mV |
| Common-Mode Rejection Ratio | 70 dB minimum | — |
| Input Type | True differential inputs | True differential inputs |
| Supply Configuration | Single supply or split supply | — |
| Compensation | Internally frequency compensated | — |
| Kemasan | 14-pin SOIC, 0.154 inch (3.90 mm) width | 14-pin SOIC |
| Jenis Pemasangan | Surface mount | Surface mount |
| Gambaran Suhu Operasi | -25 C to +85 C | [DATA_NEEDED: operating temperature range] |
| Status RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH compliance status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Slew Rate | — | 0.6 V/us |
| Minimum Common-Mode Rejection Ratio | — | 65 dB |
| Bilangan Pin | — | 14 pins |
| Operating Temperature Grade | — | Commercial temperature grade |
| Power Supply Configuration | — | Single supply |
| Gain | — | [DATA_NEEDED: voltage gain] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Output Current | — | [DATA_NEEDED: output current] |