LM224DG vs LM324DG Karşılaştırma
Ayrıntılı yan yana karşılaştırma LM224DG tarafından onsemi ve LM324DG tarafından onsemiAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | LM224DG | LM324DG |
|---|---|---|
| Marka | onsemi | onsemi |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Quad operational amplifier | — |
| Number of Channels | 4 circuits | 4 channels |
| Amplifier Type | General-purpose operational amplifier | Single-supply quad operational amplifier with true differential inputs |
| Gain-Bandwidth Product | 1 MHz | 1 MHz |
| Supply Voltage Range | 3 V to 32 V | 3 V to 32 V |
| Input Offset Voltage | 5 mV | 5 mV to 7 mV |
| Common-Mode Rejection Ratio | 70 dB minimum | — |
| Input Type | True differential inputs | True differential inputs |
| Supply Configuration | Single supply or split supply | — |
| Compensation | Internally frequency compensated | — |
| Paket | 14-pin SOIC, 0.154 inch (3.90 mm) width | 14-pin SOIC |
| Montaj Türü | Surface mount | Surface mount |
| İşletim Sıcaklığı Aralığı | -25 C to +85 C | [DATA_NEEDED: operating temperature range] |
| RoHS Durumu | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH compliance status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Slew Rate | — | 0.6 V/us |
| Minimum Common-Mode Rejection Ratio | — | 65 dB |
| Pin Sayısı | — | 14 pins |
| Operating Temperature Grade | — | Commercial temperature grade |
| Power Supply Configuration | — | Single supply |
| Gain | — | [DATA_NEEDED: voltage gain] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Output Current | — | [DATA_NEEDED: output current] |