MC34912G5ACR2 vs MC33912G5ACR2 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci MC34912G5ACR2 disebabkan oleh NXP Semiconductors dan MC33912G5ACR2 disebabkan oleh NXP Semiconductors. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
NXP Semiconductors
MC34912G5ACR2 - LIN SBC PMIC, 2x 5V LDOs, DC Predriver | NXP
MC34912G5ACR2 ✓ AktifPengandingan Spesifikasi
| Parametr | MC34912G5ACR2 | MC33912G5ACR2 |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Power Management | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Fungsi | System Basis Chip (SBC) with LIN transceiver, dual 5V LDOs, DC motor predriver, current sense | LIN System Basis Chip with DC Motor Pre-driver and Current Sense |
| Interface / Protocol | SPI control + LIN 2.0/2.1/2.2 / J2602 | — |
| Supply Voltage (VBAT) | 5.5 V to 18 V (max 27 V transient) | — |
| On-board LDOs | 2 x 5.0 V regulators, up to 200 mA each | — |
| Motor Predriver | Low-side N-channel predriver with current sense (0.11 A output current capability) | — |
| Wake-up Inputs | 4 wake pins (L1-L4) + cyclic sense + forced wake | — |
| Operating Modes | Normal, Stop, Sleep, Cyclic Sense | — |
| Analog MUX (AMUX) | Selectable battery / temperature / pin voltage monitor to MCU ADC | — |
| Suhu Operasi | -40 C to +85 C (industrial) | -40 °C to +125 °C |
| Kemasan | 32-pin LQFP (7 mm x 7 mm) | 32-LQFP (7x7 mm) |
| Jenis Pemasangan | Surface Mount (Gull Wing) | Surface Mount |
| Aras MSL | [DATA_NEEDED: MSL level] | [DATA_NEEDED: MSL level] |
| Status RoHS | Compliant | Compliant (Pb-free) |
| Lead-Free / Halogen-Free | [DATA_NEEDED: lead-free/halogen-free confirmation] | — |
| Terminal Form | GULL WING (LQFP) | — |
| Package Code | LQFP-32 | — |
| Supply Voltage Range | — | 5.5 V to 27 V (serial comm. 5.5 V to 18 V) |
| Typical Supply Current | — | 4.5 mA |
| LDO Regulator 1 (V1) Output | — | 5.0 V, 60 mA continuous / 200 mA peak |
| LDO Regulator 2 (V2) Output | — | 5.0 V, 20 mA continuous / 200 mA peak |
| LIN Transceiver Standard | — | LIN 2.0 / 2.1 / SAE J2602 |
| LIN ESD (IEC 61000-4-2 contact) | — | ±6.0 kV minimum |
| Motor Pre-driver Current | — | Up to 1.0 A (high-side / low-side) |
| Current Sense Amplifier | — | Differential Isense H/L inputs with selectable gain |
| SPI Interface | — | 32-bit, up to 4 MHz |
| Packaging | — | Tape & Reel (TR) |