MC34912G5ACR2 vs MC33912G5ACR2 موازنہ
تفصیلی ساتھ ساتھ موازنہ از MC34912G5ACR2 بذریعہ NXP Semiconductors اور MC33912G5ACR2 بذریعہ NXP Semiconductors. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
NXP Semiconductors
MC34912G5ACR2 - LIN SBC PMIC, 2x 5V LDOs, DC Predriver | NXP
MC34912G5ACR2 ✓ فعالخصوصیات کا موازنہ
| پیرامیٹر | MC34912G5ACR2 | MC33912G5ACR2 |
|---|---|---|
| برانڈ | NXP Semiconductors | NXP Semiconductors |
| زمرہ | Power Management | Power MOSFET Drivers |
| لائف سائیکل کی حالت | فعال | فعال |
| فنکشن | System Basis Chip (SBC) with LIN transceiver, dual 5V LDOs, DC motor predriver, current sense | LIN System Basis Chip with DC Motor Pre-driver and Current Sense |
| Interface / Protocol | SPI control + LIN 2.0/2.1/2.2 / J2602 | — |
| Supply Voltage (VBAT) | 5.5 V to 18 V (max 27 V transient) | — |
| On-board LDOs | 2 x 5.0 V regulators, up to 200 mA each | — |
| Motor Predriver | Low-side N-channel predriver with current sense (0.11 A output current capability) | — |
| Wake-up Inputs | 4 wake pins (L1-L4) + cyclic sense + forced wake | — |
| Operating Modes | Normal, Stop, Sleep, Cyclic Sense | — |
| Analog MUX (AMUX) | Selectable battery / temperature / pin voltage monitor to MCU ADC | — |
| آپریٹنگ درجہ حرارت | -40 C to +85 C (industrial) | -40 °C to +125 °C |
| پیکیج | 32-pin LQFP (7 mm x 7 mm) | 32-LQFP (7x7 mm) |
| ماؤنٹنگ ٹائپ | Surface Mount (Gull Wing) | Surface Mount |
| MSL لیول | [DATA_NEEDED: MSL level] | [DATA_NEEDED: MSL level] |
| RoHS اسٹیٹس | Compliant | Compliant (Pb-free) |
| Lead-Free / Halogen-Free | [DATA_NEEDED: lead-free/halogen-free confirmation] | — |
| Terminal Form | GULL WING (LQFP) | — |
| Package Code | LQFP-32 | — |
| Supply Voltage Range | — | 5.5 V to 27 V (serial comm. 5.5 V to 18 V) |
| Typical Supply Current | — | 4.5 mA |
| LDO Regulator 1 (V1) Output | — | 5.0 V, 60 mA continuous / 200 mA peak |
| LDO Regulator 2 (V2) Output | — | 5.0 V, 20 mA continuous / 200 mA peak |
| LIN Transceiver Standard | — | LIN 2.0 / 2.1 / SAE J2602 |
| LIN ESD (IEC 61000-4-2 contact) | — | ±6.0 kV minimum |
| Motor Pre-driver Current | — | Up to 1.0 A (high-side / low-side) |
| Current Sense Amplifier | — | Differential Isense H/L inputs with selectable gain |
| SPI Interface | — | 32-bit, up to 4 MHz |
| Packaging | — | Tape & Reel (TR) |