MC34912G5ACR2 vs MC33912G5ACR2 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng MC34912G5ACR2 sa pamamagitan ng NXP Semiconductors at MC33912G5ACR2 sa pamamagitan ng NXP Semiconductors. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
NXP Semiconductors
MC34912G5ACR2 - LIN SBC PMIC, 2x 5V LDOs, DC Predriver | NXP
MC34912G5ACR2 ✓ NakahandaNXP Semiconductors
MC33912G5ACR2 - LIN SBC, 2x LDO, DC Motor Predriver | NXP
MC33912G5ACR2 ✓ NakahandaPagsanggunian na paghahambing
| Parametro | MC34912G5ACR2 | MC33912G5ACR2 |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Kategorya | Power Management | Power MOSFET Drivers |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Fungsi | System Basis Chip (SBC) with LIN transceiver, dual 5V LDOs, DC motor predriver, current sense | LIN System Basis Chip with DC Motor Pre-driver and Current Sense |
| Interface / Protocol | SPI control + LIN 2.0/2.1/2.2 / J2602 | — |
| Supply Voltage (VBAT) | 5.5 V to 18 V (max 27 V transient) | — |
| On-board LDOs | 2 x 5.0 V regulators, up to 200 mA each | — |
| Motor Predriver | Low-side N-channel predriver with current sense (0.11 A output current capability) | — |
| Wake-up Inputs | 4 wake pins (L1-L4) + cyclic sense + forced wake | — |
| Operating Modes | Normal, Stop, Sleep, Cyclic Sense | — |
| Analog MUX (AMUX) | Selectable battery / temperature / pin voltage monitor to MCU ADC | — |
| Temperature na Operasyon | -40 C to +85 C (industrial) | -40 °C to +125 °C |
| Packhaging | 32-pin LQFP (7 mm x 7 mm) | 32-LQFP (7x7 mm) |
| Uri ng Pagpapasok | Surface Mount (Gull Wing) | Surface Mount |
| Level ng MSL | [DATA_NEEDED: MSL level] | [DATA_NEEDED: MSL level] |
| Tindminan RoHS | Compliant | Compliant (Pb-free) |
| Lead-Free / Halogen-Free | [DATA_NEEDED: lead-free/halogen-free confirmation] | — |
| Terminal Form | GULL WING (LQFP) | — |
| Package Code | LQFP-32 | — |
| Supply Voltage Range | — | 5.5 V to 27 V (serial comm. 5.5 V to 18 V) |
| Typical Supply Current | — | 4.5 mA |
| LDO Regulator 1 (V1) Output | — | 5.0 V, 60 mA continuous / 200 mA peak |
| LDO Regulator 2 (V2) Output | — | 5.0 V, 20 mA continuous / 200 mA peak |
| LIN Transceiver Standard | — | LIN 2.0 / 2.1 / SAE J2602 |
| LIN ESD (IEC 61000-4-2 contact) | — | ±6.0 kV minimum |
| Motor Pre-driver Current | — | Up to 1.0 A (high-side / low-side) |
| Current Sense Amplifier | — | Differential Isense H/L inputs with selectable gain |
| SPI Interface | — | 32-bit, up to 4 MHz |
| Packaging | — | Tape & Reel (TR) |