MMA1260KEG vs MMA1270KEG Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci MMA1260KEG disebabkan oleh NXP Semiconductors dan MMA1270KEG disebabkan oleh NXP Semiconductors. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
NXP Semiconductors
MMA1270KEG - ±2.5g Z-Axis Micromachined Accelerometer | NXP | SOIC-16
MMA1270KEG ObsoletePengandingan Spesifikasi
| Parametr | MMA1260KEG | MMA1270KEG |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Motion Sensors | Motion Sensors |
| Status Lingkungan Hidup | NRND | Obsolete |
| Jenis Sensus | Accelerometer, single-axis analog | Accelerometer, single-axis (Z axis) |
| Gambaran UKUR | ±1.5 g | ±2.5 g |
| Technology | Micromachined silicon capacitive MEMS | Capacitive MEMS, surface micromachined |
| Tegangan Pemberi Arus | 5.0 V (typ) | — |
| Arus Pemberi Arus | 5.0 mA (typ) | [DATA_NEEDED: typical supply current in mA] |
| Jenis Output | Analog, ratiometric | Analog voltage (ratiometric) |
| Zero-g Output Voltage | 2.5 V nominal at Vdd = 5.0 V | — |
| Sensitivity | [DATA_NEEDED: sensitivity in mV/g] | 712.5 mV/g to 787.5 mV/g |
| Filter | 2-pole low-pass, factory-set cutoff | — |
| Self-Test | Yes (logic-level activation) | — |
| Temperature Compensation | On-chip factory-calibrated | On-chip |
| Gambaran Suhu Operasi | -40 °C to +85 °C | -40 °C to +85 °C |
| Kemasan | 16-pin SOIC (SOP-16 / K suffix) | — |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Sensitivity Drift over Temperature | [DATA_NEEDED: %FS/°C] | — |
| Bandwidth | [DATA_NEEDED: Hz] | — |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Supply Voltage (VDD) | — | 4.75 V to 5.25 V |
| Zero-g Output Voltage (typ) | — | 2.5 V at VDD = 5 V |
| Bandwidth (Low-Pass Filter) | — | 50 Hz (two-pole) |
| Self-Test Input | — | Yes (logic-level, active high) |
| Kemasan / Case | — | 16-pin SOIC (KEG suffix), tube |
| Axis | — | Z-axis (perpendicular to PCB) |