5M40ZE64I5N - 40 LE MAX V CPLD, 64-EQFP, Industrial | Intel / Altera
MPN: 5M40ZE64I5N ✓ Aktif5M40ZE64I5N Ringkasan
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that sits between discrete 74-series glue logic and higher-density FPGAs. In the broader system hierarchy, CPLDs are glue-logic ICs used for I/O expansion, bus bridging, power-up sequencing, and custom interface logic. They retain configuration in on-chip flash memory, so they behave like dedicated ASICs the moment power is applied, with no external boot memory required.
The MAX V family uses a low-power 1.8 V core with on-chip voltage regulation, and the device supports JTAG (IEEE 1149.1) boundary-scan testing and in-system programmability via the standard Altera / Intel Quartus II toolchain. Multi-voltage I/O banks let the 5M40ZE64I5N interface directly to 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V, and LVTTL/LVCMOS logic without external level shifters.
Typical applications include power-on reset and sequencing controllers, I/O expansion for microcontrollers and SoCs, address decoding for memory buses, and interface bridging between legacy and modern peripherals. Its small footprint and low standby current also suit battery-backed industrial and consumer designs.
When designing with the 5M40ZE64I5N, note that the 64-EQFP package benefits from a small exposed-pad-style thermal pad on the underside for board-level reliability - follow Intel land-pattern guidelines. Quartus II version 13.0 or the corresponding Quartus Prime support must be used to compile the design into a JEDEC programming file.
This page synthesizes verified distributor pricing, same-family drop-in alternatives, and practical design guidance that you will not find on any single distributor or manufacturer page, helping engineers shorten the component-selection cycle.
Pilihan pengganti yang segera untuk 5M40ZE64I5N — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera 5M40ZE64I5N (sama faktor bentuk dan kaki) — berbeza dalam Package, Operating Temperature, Programming Interface, Configuration Memory, Propagation Delay (tPD).
5M40ZE64C5N
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →5M40ZE64C4N
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →5M40ZE64A5N
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →5M80ZE64I5N
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →5M160ZE64I5N
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →5M40ZE64I5N Penilaian maksimum & Ciri-ciri Elektrik
| Device Family | MAX V |
| Logic Elements (LE) | 40 |
| Macrocells | 32 |
| Propagation Delay (tPD) | 7.5 ns |
| Core Voltage (VCCINT) | 1.8 V |
| I/O Bank Voltage (VCCIO) | 1.2 V to 3.3 V (multi-voltage, LVCMOS / LVTTL) |
| Configuration Technology | Non-volatile flash, instant-on (<= 0.5 ms) |
| Standby Current | 25 µA (typical) |
| Suhu Operasi | -40 °C to +100 °C (Industrial, I-suffix) |
| Kemasan | 64-pin EQFP (EQFP-64), 9 mm x 9 mm, 0.4 mm pitch |
| Jenis Pemasangan | Surface Mount |
| Lead-Free / RoHS | Lead free, plastic, RoHS compliant (per FindIC description) |
| JTAG Support | IEEE 1149.1 boundary-scan, in-system programmability |
| Toolchain | Quartus II (MAX V device support) / Quartus Prime |
Panduan Konfigurasi Pin 5M40ZE64I5N 64-pin eqfp (eqfp-64), 9 mm x 9 mm, 0.4 mm pitch
Konfigurasi pin untuk 5M40ZE64I5N (64-pin eqfp (eqfp-64), 9 mm x 9 mm, 0.4 mm pitch pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk 5M40ZE64I5N.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
5M40ZE64I5N patut untuk 6 aplikasis: Power-on Reset and Sequencing Controller, I/O Expansion for Microcontrollers, Address Decoding and Memory Bus Bridging, Industrial Interface Bridging (SPI / I2C / UART / Parallel), Motor Control and Drive Glue Logic, Legacy Peripheral Replacement for 74-series Glue Logic.
Power-on Reset and Sequencing Controller
The 5M40ZE64I5N is ideal for power-on reset and multi-rail power sequencing in industrial and embedded boards. Its non-volatile instant-on configuration (≤0.5 ms from VCC stable) lets the device assert reset, monitor voltage rails, and release downstream MCUs/SoCs deterministically without any boot memory. The 32 macrocells comfortably handle sequencing state machines for 3-5 rails, and the 25 µA standby current keeps quiescent draw negligible on always-on battery-backed systems. Industrial -40 °C to +100 °C rating supports factory and outdoor enclosures.
Disebarkan
I/O Expansion for Microcontrollers
Use the 5M40ZE64I5N to expand GPIO, key-scan, or LED-drive capacity on low-pin-count MCUs. The multi-voltage VCCIO bank (1.2 V to 3.3 V LVCMOS/LVTTL) lets the CPLD bridge a 1.8 V MCU to 3.3 V peripherals without external level shifters. Its 7.5 ns propagation delay easily meets debounce, encoding, and MUX switching requirements. The 9 mm x 9 mm EQFP-64 package is a strong fit for handheld and IoT boards where PCB area is constrained and instant-on behavior is required.
Disebarkan
Address Decoding and Memory Bus Bridging
The 5M40ZE64I5N is well suited to decode address lines, generate chip-selects, and bridge between legacy and modern memory buses. Its 7.5 ns tPD keeps the decode inside a typical MCU access cycle, and the 40 LE / 32 macrocell budget is sufficient for full address-decode trees in 8/16/32-bit systems. Non-volatile configuration eliminates the boot-time risk of mis-decoded bus contention, a frequent problem with SRAM-based PLDs. Industrial temperature rating lets it operate in factory automation backplanes.
Disebarkan
Industrial Interface Bridging (SPI / I2C / UART / Parallel)
The 5M40ZE64I5N can convert between SPI, I2C, UART, and parallel interfaces in industrial PLCs and instrumentation. Its multi-voltage I/O banks let the same CPLD bridge a 5 V-tolerant sensor bus to a 1.8 V SoC without external translators. The 40-LE budget supports FIFO-style buffering, format conversion, and custom protocol-bit-banging tasks. Industrial -40 °C to +100 °C operation and 25 µA standby current suit permanently powered field devices.
Disebarkan
Motor Control and Drive Glue Logic
The 5M40ZE64I5N provides deterministic glue logic for motor-control boards - encoder decoding, Hall-sensor conditioning, PWM fault combining, and brake/coil drivers. Its 7.5 ns tPD keeps feedback paths inside the PWM period, and the non-volatile configuration means a motor controller starts in a known safe state at power-on - critical for functional safety. Industrial temperature rating covers under-hood automotive and industrial-drive thermal environments.
Disebarkan
Legacy Peripheral Replacement for 74-series Glue Logic
The 5M40ZE64I5N consolidates dozens of 74-series TTL/CMOS glue-logic gates - decoders, multiplexers, flip-flops, and latches - into a single non-volatile IC. A typical BOM of 8-15 discrete logic packages can collapse onto one EQFP-64 CPLD, reducing board area, power, and inventory. Instant-on flash configuration removes the boot-time risk of SRAM-based alternatives. The same JTAG and Quartus II flow used for design lets engineers iterate quickly and re-program in-system.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk 5M40ZE64I5N — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | 5M40ZE64C5N | 5M40ZE64C4N | 5M40ZE64A5N | 5M80ZE64I5N | 5M160ZE64I5N |
|---|---|---|---|---|---|---|
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Package | EQFP-64 (9 mm x 9 mm) | EQFP-64 (9 mm x 9 mm) - same | EQFP-64 (9 mm x 9 mm) - same | EQFP-64 (9 mm x 9 mm) - same | EQFP-64 (9 mm x 9 mm) - same | EQFP-64 (9 mm x 9 mm) - same |
| Logic Elements (LE) | 40 | 40 (identical) | 40 (identical) | 40 (identical) | 80 (+100%) | 160 (+300%) |
| Macrocells | 32 | 32 (identical) | 32 (identical) | 32 (identical) | 64 (+100%) | 128 (+300%) |
| Operating Temperature | -40 °C to +100 °C (Industrial) | 0 °C to +85 °C (Commercial) | 0 °C to +85 °C (Commercial) | Automotive grade | -40 °C to +100 °C (Industrial) | -40 °C to +100 °C (Industrial) |
| Propagation Delay (tPD) | 7.5 ns | 7.5 ns (identical) | 7.5 ns (identical) | 7.5 ns (identical) | 7.5 ns (identical) | 7.5 ns (identical) |
| Core Voltage (VCCINT) | 1.8 V | 1.8 V (identical) | 1.8 V (identical) | 1.8 V (identical) | 1.8 V (identical) | 1.8 V (identical) |
| I/O Voltage Range (VCCIO) | 1.2 V to 3.3 V (LVCMOS / LVTTL) | 1.2 V to 3.3 V (identical) | 1.2 V to 3.3 V (identical) | 1.2 V to 3.3 V (identical) | 1.2 V to 3.3 V (identical) | 1.2 V to 3.3 V (identical) |
| Configuration | Non-volatile flash, instant-on <= 0.5 ms | Non-volatile flash, identical | Non-volatile flash, identical | Non-volatile flash, identical | Non-volatile flash, identical | Non-volatile flash, identical |
Penyeberangsung Jelas
- Smallest-density MAX V CPLD in EQFP-64 with industrial temp rating (vs5M40ZE64C5N)
- Pin-compatible upgrade path within the same footprint (vs5M80ZE64I5N)
- Non-volatile instant-on configuration eliminates boot memory (vsSmall SRAM-based FPGA (e.g. Cyclone family))
Catatan Desain
The 5M40ZE64I5N requires a clean 1.8 V core supply (VCCINT) plus one or more VCCIO rails for each I/O bank. Decouple each VCCINT pin with a 100 nF X7R ceramic capacitor placed within 2-3 mm of the pin, and add a 10 µF bulk capacitor at the supply entry point. If the design uses multiple VCCIO voltages (1.2 V, 1.8 V, 2.5 V, 3.3 V), decouple each bank separately to prevent switching noise on one bank from coupling into another through shared internal substrate.
The 64-EQFP package has a 0.4 mm lead pitch - follow Intel's land-pattern recommendations for the EQFP-64 footprint with solder-mask-defined pads to avoid solder bridging. Use a 4-layer stack-up with a solid ground plane on layer 2 directly under the CPLD; this provides a low-impedance return path for high-speed outputs and reduces EMI. Keep JTAG (TCK, TMS, TDI, TDO) traces short and length-matched within the bank, and place a 10 kΩ pull-up on TCK and TMS to keep the JTAG state machine in a known reset state at power-up.
Estimated: the EQFP-64 package has a thermal resistance of approximately 45-55 C/W (θJA) on a standard 4-layer JEDEC test board; the 5M40ZE64I5N draws only tens of milliamps from VCCINT, so junction temperature rise is negligible and no heatsink is required. However, do not connect unused I/O pins directly to GND or VCCIO without enabling internal pull-ups or pull-downs in the Quartus II pin-assignment file; floating unused pins can draw excess current in some CMOS input structures. Always run the Quartus II fitter with 'Auto place unused pins' set to 'As input tri-stated with weak pull-up' for unused general-purpose I/O.
Maklumat Kesediaan
Lead-free, plastic, RoHS-compliant EQFP-64 package per FindIC description. REACH, halogen-free status, and conflict-mineral compliance not stated in the verified web data; treat as 'unknown'. The 5M40ZE64A5N is the automotive-grade ordering variant; the I5N itself is industrial-grade and not AEC-Q100 qualified.
