Analog Devices

AD544LH - Precision BiFET Op Amp, 25 pA Max | Analog Devices

MPN: AD544LH ✗ Akhir Hayat
500 uV max Vdss 25 pA max, warmed up Id TO-99 hermetically sealed metal can, MBCY8 Package
MOQ: 1 |

AD544LH Ringkasan

The Analog Devices AD544LH is a single, precision BiFET operational amplifier specified for a maximum input bias current of 25 pA at room temperature and a maximum input offset voltage of 500 uV. The device is offered in the hermetically sealed, eight-pin TO-99 metal can package designated MBCY8, making it suitable for legacy and high-reliability analog signal-conditioning designs that require a through-hole metal-can footprint.

A BiFET operational amplifier is a voltage-amplifier IC whose input stage uses field-effect transistors to produce very low input bias current. Within the signal-chain hierarchy, the AD544LH belongs to the family of precision amplifiers used for current-to-voltage conversion, instrumentation, buffering, and feedback control. Its low-bias input characteristic is especially useful when the source impedance is high and the amplifier must avoid loading the sensing node.

The AD544 family uses precision monolithic BiFET construction combined with laser trimming for offset-voltage control. Key characteristics include one amplifier function, a maximum offset voltage of 500 uV for the AD544LH grade, and a maximum bias current of 25 pA when warmed up. The L grade operates from 0°C to +70°C, while the S grade in the same family covers -55°C to +125°C.

All devices in the AD542, AD544, and AD547 series are offered in the hermetically sealed TO-99 metal can package. This construction supports use in older instrumentation, industrial analog interfaces, and precision measurement equipment where a conventional eight-lead metal-can footprint is already established on the board.

Typical applications include precision transimpedance amplifiers, guarded sensor amplifiers, low-level signal conditioning, laboratory measurement systems, and industrial process-control interfaces. The low bias current helps preserve small sensor signals, while the trimmed offset limits input-referred error when the signal is amplified through high gain.

When designing a replacement circuit, confirm the eight-pin TO-99 pin arrangement, supply voltage, common-mode range, output swing, and stability requirements before substitution. Keep sensitive input-node routing short, use a clean ground reference, and verify that the selected grade covers the intended ambient temperature range.

Pilihan pengganti yang segera untuk AD544LH — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera AD544LH (sama faktor bentuk dan kaki) — berbeza dalam Maximum Input Bias Current, Operating Temperature Range.

Analog Devices
Maximum Input Bias Current: 25 pA maximum, warmed up
Operating Temperature Range: -55°C to +125°C
Bandingkan Dengan AD544LH →

AD544JH

✅ Masuk Drop-In
📦 TO-99 (MBCY8)
J grade instead of L grade; both retain the 0°C to +70°C commercial-temperature specification, with no headline bias or offset change documented

📋 Alternatif rujukan (tidak dalam katalog)

AD544SH

✅ Masuk Drop-In
Analog Devices
📦 TO-99 (MBCY8)
Precision BiFET operational amplifier · 25 pA maximum, warmed up · -55°C to +125°C · Military S grade · Hermetically sealed TO-99 metal can · 8 terminals · Wire lead · Monolithic BiFET JFET input stage

Hubungi untuk harga

Lihat Datasheet →

AD544KH

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 TO-99 (MBCY8)
K grade retains the 0°C to +70°C commercial-temperature class; individual grade-level trim limits differ from the L grade

📋 Alternatif rujukan (tidak dalam katalog)

AD547LH

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
Analog Devices
📦 TO-99 (MBCY8)
Single operational amplifier · BiFET field-effect transistor input · 18 V · 25 pA · 1.5 mA · Less than 0.25 mV · 110 dB · 13 V/s

Hubungi untuk harga

Lihat Datasheet →

AD542JH

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 TO-99 (MBCY8)
AD542 J grade offers lower maximum offset voltage than the AD544LH 0.5 mV figure, with the same series package and BiFET input technology

📋 Alternatif rujukan (tidak dalam katalog)

AD544LH Penilaian maksimum & Ciri-ciri Elektrik

Amplifier Type Precision operational amplifier
Number of Channels 1 channel
Input Stage Technology BiFET field-effect transistor input
Maximum Input Bias Current 25 pA max, warmed up
Maximum Input Offset Voltage 500 uV max
Offset Voltage Adjustment Method Laser trimmed
Grade L commercial grade
Gambaran Suhu Operasi 0°C to +70°C
Package Type TO-99 hermetically sealed metal can, MBCY8
Package Pin Count 8 pins
Gaya Pemasangan Through-hole

Panduan Konfigurasi Pin AD544LH 8 pins

Konfigurasi pin untuk AD544LH (8 pins pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai 8 pins untuk AD544LH

Tiada data garisan pin yang diperoleh untuk AD544LH.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

AD544LH patut untuk 6 aplikasis: Precision Transimpedance Amplification, High-Impedance Instrumentation Amplifier Input, Low-Level Process Signal Conditioning, Precision Buffering and Level Shifting, Laboratory and Instrumentation Measurement, Legacy High-Reliability Analog Retrofit.

🔧

Precision Transimpedance Amplification

The AD544LH fits a transimpedance stage for photodiode, electrochemical-cell, or other current-source sensing because its maximum input bias current is 25 pA when warmed up. Placing the amplifier in the familiar inverting configuration allows the feedback resistor to convert sensor current into a measurable voltage while the low-bias input stage minimizes disturbance of the source. The 500 uV maximum offset specification also supports low-level current measurements. Confirm the feedback-resistor value, compensation method, and signal bandwidth in the AD544 data sheet because transimpedance stability depends on total input capacitance and noise gain rather than bias current alone.

🏭

High-Impedance Instrumentation Amplifier Input

The AD544LH is appropriate for the first stage of a precision instrumentation interface when the source presents high impedance. Its BiFET input stage draws no more than 25 pA of bias current when warmed up, reducing loading errors on sources such as strain gauges, glassy-carbon electrodes, and capacitive sensors. The L-grade device covers 0°C to +70°C, while its laser-trimmed offset voltage is limited to 500 uV. In a multi-amplifier design, verify common-mode voltage limits, input capacitance, noise performance, and stability for the intended gain before finalizing resistor and capacitor values.

🌐

Low-Level Process Signal Conditioning

The AD544LH can condition low-amplitude analog signals from industrial process-control equipment where the input source is high impedance and error current must remain small. A 25 pA maximum bias current helps preserve weak sensor outputs, and the laser-trimmed offset reduces input-referred error in high-gain stages. The hermetically sealed TO-99 package is useful in legacy or high-reliability control systems that already use this metal-can footprint. For new equipment, check supply-voltage limits, common-mode range, output drive, and operating-temperature requirements against the complete AD544 electrical tables before schematic release.

📡

Precision Buffering and Level Shifting

The AD544LH works as a unity-gain buffer or precision level-shifting stage when a high-impedance source cannot drive the next circuit directly. The low-bias BiFET input avoids charging errors at the source node, while the single-channel configuration and eight-pin TO-99 package simplify retrofitting into older analog boards. A buffer application depends on stable operation across the expected output load and common-mode range, so use the data-sheet load-capacitance and stability information when adding cable or sampling capacitance. Place the buffer close to the source and keep the feedback connection compact to minimize added noise and instability.

🧪

Laboratory and Instrumentation Measurement

The AD544LH is suited to laboratory measurement front ends that evaluate small currents or voltages from precision sensors. Its maximum input bias current of 25 pA when warmed up is valuable when the measurement source has high resistance, and the laser-trimmed offset characteristic supports predictable DC behavior after warm-up. The TO-99 hermetically sealed package can also suit legacy measurement platforms designed around the MBCY8 footprint. Specify warm-up time, input bias-current temperature behavior, and acceptable offset error for the measurement specification. Use guarding and short PCB input routes to prevent leakage from degrading the result.

⚡

Legacy High-Reliability Analog Retrofit

The AD544LH provides a practical retrofit option for legacy analog systems that use an eight-pin hermetically sealed TO-99 precision-amplifier footprint and require very low input bias current. Its BiFET input stage and 25 pA maximum warmed-up bias current suit existing sensor and feedback networks, while the TO-99 construction can help preserve reliability in established industrial platforms. Confirm that the replacement matches the original pinout, supply polarity, common-mode range, and output-load capability. Also compare the L-grade 0°C to +70°C range with the original component’s qualification before using it in equipment exposed to wider temperatures.

What is the AD544LH?
The AD544LH is a single precision BiFET operational amplifier from Analog Devices, intended for low-bias-current signal conditioning. The AD544 family provides a maximum bias current of 25 pA when warmed up, laser-trimmed offset voltage, and a hermetically sealed eight-pin TO-99 metal can package. The L grade is specified for operation from 0°C to +70°C, making it a suitable choice for commercial-temperature instrumentation.
What are the key specifications of AD544LH?
The principal AD544LH specifications include one amplifier channel, a maximum input bias current of 25 pA when warmed up, a maximum input offset voltage of 500 uV, and laser-trimmed offset adjustment. It uses a precision monolithic BiFET input stage and is supplied in the hermetically sealed MBCY8 TO-99 metal can package. Its operating temperature range is 0°C to +70°C.
Where can I download the AD544LH datasheet?
The official AD544 documentation is available on the Analog Devices AD544 product page at https://www.analog.com/en/products/ad544.html. That page provides the family data sheet and product information, including the AD542, AD544, and AD547 series specifications. Use the pin-description table and operating-condition tables in the manufacturer data sheet before assigning circuit connections or planning a footprint change.
Where can I find the AD544LH pinout?
The AD544LH pin assignment is documented in the AD544 manufacturer data sheet linked from the Analog Devices AD544 product page. It uses the eight-pin MBCY8 TO-99 metal can package, with pin 1 identified by the package marking convention. Consult the pin-description table before building a board or adapting an existing layout because the metal-can package does not follow a modern surface-mount numbering pattern.
Is AD544LH the same as AD544JH?
The AD544LH and AD544JH are grade variants of the same AD544 series device, but their temperature grades differ. The AD544LH is the L grade specified for 0°C to +70°C, while the AD544JH is the J grade in the same 0°C to +70°C commercial-temperature class. Verify the complete suffix, package marking, and electrical requirements before treating one as a substitution for the other.
Can AD544SH replace AD544LH?
The AD544SH can be a functional alternative when the replacement is qualified for the harsher temperature range, because it is specified over -55°C to +125°C while the AD544LH covers 0°C to +70°C. Both belong to the AD544 series and use the hermetically sealed TO-99 package. A board-level substitution still requires verification of pin connections, supply voltage, common-mode range, and offset requirements.
What is the best drop-in replacement for AD544LH?
The closest same-series replacement candidates are the AD544JH, AD544KH, and AD544SH, all of which use the AD544 family’s eight-pin TO-99 format. The AD544JH and AD544KH maintain the commercial-temperature class, while the AD544SH extends operation to -55°C to +125°C. No direct cross-manufacturer drop-in part is established here, so verify the complete data sheet before releasing a substitution for production.
What Analog Devices equivalent can replace AD544LH?
AD544JH is the closest grade-oriented Analog Devices alternative because it remains in the AD544 series and uses the same family package, while AD544SH provides a wider temperature rating. Both choices require confirmation of the complete operating conditions and pin assignment. The AD547LH may suit applications that require tighter offset control, but its different trim target makes it a functional option rather than an automatic equivalent.
When should I choose AD544LH over AD544SH?
Choose the AD544LH when the circuit operates within the commercial 0°C to +70°C range and you want to stay with the AD544 L-grade characteristics. Choose the AD544SH when environmental requirements extend to -55°C to +125°C. Both provide the low-bias BiFET input stage and TO-99 package, so temperature qualification, rather than package compatibility, is usually the decisive selection criterion.
Is AD544LH suitable for high-impedance sensor interfaces?
Yes, the AD544LH is suited to high-impedance sensor interfaces because its maximum input bias current is 25 pA when warmed up. This low bias reduces the error current drawn from a sensitive source node. The device also offers a maximum offset voltage of 500 uV and laser trimming, which supports low-level precision conditioning. Actual performance still depends on the source impedance, noise bandwidth, feedback network, and supply conditions.
Where to buy AD544LH online?
Use the Request a Quote form on this page to request current AD544LH availability, lot traceability, and a quotation. The component is an older hermetically sealed TO-99 device and stock status can vary by manufacturer lot. Include the required quantity, date code preference, and inspection requirements with the request so the quotation reflects the parts you intend to use.
What is the price of AD544LH?
Submit the Request a Quote form on this page for the current AD544LH unit and volume pricing. Pricing for this legacy metal-can amplifier can depend on manufacturer inventory, lot traceability, and order quantity. Because commercial terms change with market conditions, the quote form is the reliable route for a current price rather than a static page figure.
What is the lead time for AD544LH?
Request the current lead time through the Request a Quote form on this page and state the required quantity and target assembly date. Lead time depends on available manufacturer or authorized inventory and whether a specific traceability level is needed. The Request a Quote response should state the available source, estimated delivery period, and whether any allocation is required.
Is AD544LH in stock?
Current AD544LH stock is confirmed through the Request a Quote form on this page. Include the quantity, acceptable date codes, and required certification documents with your request. Because the AD544LH is an established TO-99 device, availability may be limited to discrete manufacturer lots rather than a continuously replenished mass-production channel.
What can replace AD544LH?
AD544JH, AD544KH, and AD544SH are the primary same-series alternatives for an AD544LH substitution because they remain within the AD544 family and TO-99 format. The AD547LH offers a tighter trimmed offset target and may fit some precision designs, although it is not an identical offset specification. Request a quote for the selected alternative and confirm all electrical and temperature requirements before release.

Data referensi kejuruteraan untuk AD544LH — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the AD544LH for a new or retrofit precision analog design that requires a maximum 25 pA input bias current, a hermetically sealed eight-pin TO-99 package, and operation from 0°C to +70°C. It is a logical fit for high-impedance current sensing, low-level signal conditioning, and legacy instrumentation. Choose the AD544SH when the circuit must operate from -55°C to +125°C; its wider rating can reduce qualification risk for harsh environments. Consider the AD547LH when offset performance below the AD544LH maximum is valuable, because its AD547L trim target is less than 0.25 mV. Treat the AD544JH and AD544KH as grade-level alternatives only after checking their complete limits against the design. In every case, verify the TO-99 pin arrangement, supply voltage, common-mode range, output swing, stability, and temperature requirements before releasing a substitution.

Perbandingan dengan Gantian

Parametr Produk Ini AD544JH AD544KH AD544SH AD547LH AD542JH
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package TO-99 hermetically sealed metal can, MBCY8 TO-99 hermetically sealed metal can, MBCY8 TO-99 hermetically sealed metal can, MBCY8 TO-99 hermetically sealed metal can, MBCY8 TO-99 hermetically sealed metal can, MBCY8 TO-99 hermetically sealed metal can, MBCY8
Amplifier Function Single operational amplifier Single operational amplifier Single operational amplifier Single operational amplifier Single operational amplifier Single operational amplifier
Input Stage Precision monolithic BiFET Precision monolithic BiFET Precision monolithic BiFET Precision monolithic BiFET Precision monolithic BiFET Precision monolithic BiFET
Maximum Input Bias Current 25 pA max, warmed up 25 pA max, warmed up 25 pA max, warmed up 25 pA max, warmed up 25 pA max, warmed up 25 pA max, warmed up
Operating Temperature Range 0°C to +70°C 0°C to +70°C 0°C to +70°C -55°C to +125°C 0°C to +70°C 0°C to +70°C
Offset Adjustment Method Laser trimmed Laser trimmed Laser trimmed Laser trimmed Laser trimmed Laser trimmed
Mounting Style Through-hole Through-hole Through-hole Through-hole Through-hole Through-hole

Penyeberangsung Jelas

  • Commercial-temperature L-grade selection within the precision AD544 family (vsAD544SH)
  • Documented maximum offset voltage of 500 uV (vsAD547LH)
  • Very low warmed-up bias current for sensitive high-impedance sources (vsAD544JH)

Catatan Desain

Route the amplifier input directly to the feedback network and sensitive source. The maximum input bias current of 25 pA is small, but PCB contamination and leakage can become significant on very high-impedance nodes. Use a cleaned board, remove flux residue around the input, and apply guarding where source impedances are extremely high. Keep the input trace short to minimize capacitance pickup and avoid running it beside switching-node traces.

Check the AD544 supply-voltage and common-mode limits against the actual circuit before layout release. Bypass each supply connection with a local ceramic capacitor and add bulk decoupling near the board’s supply entry point if the amplifier is separated from the capacitor by long traces. Stable power grounding is especially important in high-gain precision circuits because supply variation and ground movement can appear as input-referred error.

Do not interchange the L, J, K, and S grade suffixes without checking temperature qualification and the grade-specific electrical limits. The AD544SH extends operation from -55°C to +125°C, whereas the AD544LH is specified for 0°C to +70°C. Also confirm that any board revision uses the eight-pin TO-99 pin arrangement rather than assuming the numbering of a modern surface-mount op amp.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The AD544LH is a legacy hermetically sealed TO-99 amplifier. No RoHS, REACH, halogen-free, lead-free, or conflict-minerals status is stated on the product page excerpt, so those fields remain unknown. AEC-Q100 is not applicable to this non-automotive amplifier grade.

Pencarian Berhubungan

AD544LH datasheet AD544LH pinout AD544LH specifications AD544LH TO-99 footprint AD544LH equivalent AD544LH replacement AD544LH vs AD544JH AD544LH vs AD544SH AD544LH price AD544LH stock Analog Devices AD544LH AD544LH 25 pA BiFET amplifier

Komponen dan Tanda berkaitan

Analog Devices AD544LH AD544JH AD544KH AD544SH AD547LH AD542JH BiFET field-effect transistor input precision operational amplifier signal-conditioning IC transimpedance amplifier input bias current input offset voltage laser trimming TO-99 MBCY8 hermetically sealed metal can through-hole package precision instrumentation industrial process control high-impedance sensor commercial temperature grade 0°C to +70°C RoHS REACH
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ