AD544LH - Precision BiFET Op Amp, 25 pA Max | Analog Devices
MPN: AD544LH ✗ 停產AD544LH 概覽
A BiFET operational amplifier is a voltage-amplifier IC whose input stage uses field-effect transistors to produce very low input bias current. Within the signal-chain hierarchy, the AD544LH belongs to the family of precision amplifiers used for current-to-voltage conversion, instrumentation, buffering, and feedback control. Its low-bias input characteristic is especially useful when the source impedance is high and the amplifier must avoid loading the sensing node.
The AD544 family uses precision monolithic BiFET construction combined with laser trimming for offset-voltage control. Key characteristics include one amplifier function, a maximum offset voltage of 500 uV for the AD544LH grade, and a maximum bias current of 25 pA when warmed up. The L grade operates from 0°C to +70°C, while the S grade in the same family covers -55°C to +125°C.
All devices in the AD542, AD544, and AD547 series are offered in the hermetically sealed TO-99 metal can package. This construction supports use in older instrumentation, industrial analog interfaces, and precision measurement equipment where a conventional eight-lead metal-can footprint is already established on the board.
Typical applications include precision transimpedance amplifiers, guarded sensor amplifiers, low-level signal conditioning, laboratory measurement systems, and industrial process-control interfaces. The low bias current helps preserve small sensor signals, while the trimmed offset limits input-referred error when the signal is amplified through high gain.
When designing a replacement circuit, confirm the eight-pin TO-99 pin arrangement, supply voltage, common-mode range, output swing, and stability requirements before substitution. Keep sensitive input-node routing short, use a clean ground reference, and verify that the selected grade covers the intended ambient temperature range.
直接替換替代品,適用於 AD544LH — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: AD544LH (相同外形與佔位) — 差異在於 Maximum Input Bias Current, Operating Temperature Range.
AD544JH
✅ 直接替換📋 參考替代品(不在目錄中)
AD544SH
✅ 直接替換聯絡詢價
查看資料表 →AD544KH
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
AD547LH
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →AD542JH
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
AD544LH 最大額定值與電氣特性
| Amplifier Type | Precision operational amplifier |
| Number of Channels | 1 channel |
| Input Stage Technology | BiFET field-effect transistor input |
| Maximum Input Bias Current | 25 pA max, warmed up |
| Maximum Input Offset Voltage | 500 uV max |
| Offset Voltage Adjustment Method | Laser trimmed |
| Grade | L commercial grade |
| 工作溫度範圍 | 0°C to +70°C |
| Package Type | TO-99 hermetically sealed metal can, MBCY8 |
| Package Pin Count | 8 pins |
| 安裝方式 | Through-hole |
AD544LH 8 pins 腳位配置指南
AD544LH(8 pins 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: AD544LH.
請參閱 資料表 以查看完整腳位配置。
典型應用
AD544LH 適用於 6 應用s: Precision Transimpedance Amplification, High-Impedance Instrumentation Amplifier Input, Low-Level Process Signal Conditioning, Precision Buffering and Level Shifting, Laboratory and Instrumentation Measurement, Legacy High-Reliability Analog Retrofit.
Precision Transimpedance Amplification
The AD544LH fits a transimpedance stage for photodiode, electrochemical-cell, or other current-source sensing because its maximum input bias current is 25 pA when warmed up. Placing the amplifier in the familiar inverting configuration allows the feedback resistor to convert sensor current into a measurable voltage while the low-bias input stage minimizes disturbance of the source. The 500 uV maximum offset specification also supports low-level current measurements. Confirm the feedback-resistor value, compensation method, and signal bandwidth in the AD544 data sheet because transimpedance stability depends on total input capacitance and noise gain rather than bias current alone.
High-Impedance Instrumentation Amplifier Input
The AD544LH is appropriate for the first stage of a precision instrumentation interface when the source presents high impedance. Its BiFET input stage draws no more than 25 pA of bias current when warmed up, reducing loading errors on sources such as strain gauges, glassy-carbon electrodes, and capacitive sensors. The L-grade device covers 0°C to +70°C, while its laser-trimmed offset voltage is limited to 500 uV. In a multi-amplifier design, verify common-mode voltage limits, input capacitance, noise performance, and stability for the intended gain before finalizing resistor and capacitor values.
Low-Level Process Signal Conditioning
The AD544LH can condition low-amplitude analog signals from industrial process-control equipment where the input source is high impedance and error current must remain small. A 25 pA maximum bias current helps preserve weak sensor outputs, and the laser-trimmed offset reduces input-referred error in high-gain stages. The hermetically sealed TO-99 package is useful in legacy or high-reliability control systems that already use this metal-can footprint. For new equipment, check supply-voltage limits, common-mode range, output drive, and operating-temperature requirements against the complete AD544 electrical tables before schematic release.
Precision Buffering and Level Shifting
The AD544LH works as a unity-gain buffer or precision level-shifting stage when a high-impedance source cannot drive the next circuit directly. The low-bias BiFET input avoids charging errors at the source node, while the single-channel configuration and eight-pin TO-99 package simplify retrofitting into older analog boards. A buffer application depends on stable operation across the expected output load and common-mode range, so use the data-sheet load-capacitance and stability information when adding cable or sampling capacitance. Place the buffer close to the source and keep the feedback connection compact to minimize added noise and instability.
Laboratory and Instrumentation Measurement
The AD544LH is suited to laboratory measurement front ends that evaluate small currents or voltages from precision sensors. Its maximum input bias current of 25 pA when warmed up is valuable when the measurement source has high resistance, and the laser-trimmed offset characteristic supports predictable DC behavior after warm-up. The TO-99 hermetically sealed package can also suit legacy measurement platforms designed around the MBCY8 footprint. Specify warm-up time, input bias-current temperature behavior, and acceptable offset error for the measurement specification. Use guarding and short PCB input routes to prevent leakage from degrading the result.
Legacy High-Reliability Analog Retrofit
The AD544LH provides a practical retrofit option for legacy analog systems that use an eight-pin hermetically sealed TO-99 precision-amplifier footprint and require very low input bias current. Its BiFET input stage and 25 pA maximum warmed-up bias current suit existing sensor and feedback networks, while the TO-99 construction can help preserve reliability in established industrial platforms. Confirm that the replacement matches the original pinout, supply polarity, common-mode range, and output-load capability. Also compare the L-grade 0°C to +70°C range with the original component’s qualification before using it in equipment exposed to wider temperatures.
工程參考資料,適用於 AD544LH — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | AD544JH | AD544KH | AD544SH | AD547LH | AD542JH |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | TO-99 hermetically sealed metal can, MBCY8 | TO-99 hermetically sealed metal can, MBCY8 | TO-99 hermetically sealed metal can, MBCY8 | TO-99 hermetically sealed metal can, MBCY8 | TO-99 hermetically sealed metal can, MBCY8 | TO-99 hermetically sealed metal can, MBCY8 |
| Amplifier Function | Single operational amplifier | Single operational amplifier | Single operational amplifier | Single operational amplifier | Single operational amplifier | Single operational amplifier |
| Input Stage | Precision monolithic BiFET | Precision monolithic BiFET | Precision monolithic BiFET | Precision monolithic BiFET | Precision monolithic BiFET | Precision monolithic BiFET |
| Maximum Input Bias Current | 25 pA max, warmed up | 25 pA max, warmed up | 25 pA max, warmed up | 25 pA max, warmed up | 25 pA max, warmed up | 25 pA max, warmed up |
| Operating Temperature Range | 0°C to +70°C | 0°C to +70°C | 0°C to +70°C | -55°C to +125°C | 0°C to +70°C | 0°C to +70°C |
| Offset Adjustment Method | Laser trimmed | Laser trimmed | Laser trimmed | Laser trimmed | Laser trimmed | Laser trimmed |
| Mounting Style | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole |
主要差異化特點
- Commercial-temperature L-grade selection within the precision AD544 family (對比AD544SH)
- Documented maximum offset voltage of 500 uV (對比AD547LH)
- Very low warmed-up bias current for sensitive high-impedance sources (對比AD544JH)
設計說明
Route the amplifier input directly to the feedback network and sensitive source. The maximum input bias current of 25 pA is small, but PCB contamination and leakage can become significant on very high-impedance nodes. Use a cleaned board, remove flux residue around the input, and apply guarding where source impedances are extremely high. Keep the input trace short to minimize capacitance pickup and avoid running it beside switching-node traces.
Check the AD544 supply-voltage and common-mode limits against the actual circuit before layout release. Bypass each supply connection with a local ceramic capacitor and add bulk decoupling near the board’s supply entry point if the amplifier is separated from the capacitor by long traces. Stable power grounding is especially important in high-gain precision circuits because supply variation and ground movement can appear as input-referred error.
Do not interchange the L, J, K, and S grade suffixes without checking temperature qualification and the grade-specific electrical limits. The AD544SH extends operation from -55°C to +125°C, whereas the AD544LH is specified for 0°C to +70°C. Also confirm that any board revision uses the eight-pin TO-99 pin arrangement rather than assuming the numbering of a modern surface-mount op amp.
合規資訊
The AD544LH is a legacy hermetically sealed TO-99 amplifier. No RoHS, REACH, halogen-free, lead-free, or conflict-minerals status is stated on the product page excerpt, so those fields remain unknown. AEC-Q100 is not applicable to this non-automotive amplifier grade.