Analog Devices

AD705AZ - 100pA Input, 800kHz Op Amp | Analog Devices

MPN: AD705AZ ✗ Akhir Hayat
150 uV Vdss 100 pA Id 8-pin CERDIP Package
MOQ: 1 |

AD705AZ Ringkasan

The Analog Devices AD705AZ is a single-channel bipolar operational amplifier featuring a picoampere-class input current of 100 pA, a slew rate of 0.15 V/us, a gain-bandwidth product of 800 kHz, and an input offset voltage of 150 uV. The device is packaged in an 8-pin CERDIP package. These characteristics position it as a precision amplifier for high-impedance sensing, low-current measurement, and instrumentation applications.

An operational amplifier is an analog integrated circuit that uses differential feedback to amplify the difference between two input voltages. The AD705 belongs to the bipolar operational amplifier category, combining low input bias current with conventional precision-amplifier signal conditioning. Its low-current input stage is especially useful when the source resistance is high enough that input leakage could otherwise create a significant measurement error.

The AD705AZ provides 100 pA input current, 800 kHz gain bandwidth, 0.15 V/us slew rate, and 150 uV offset voltage. The 800 kHz bandwidth supports low-frequency closed-loop amplification, while the 0.15 V/us slew rate determines how rapidly the output can change under dynamic conditions. The 150 uV offset specification is particularly relevant when the amplifier operates near its input range and the measured signal is small.

This device uses a bipolar input architecture and is specified as a picoampere-input-current bipolar operational amplifier. Its practical performance depends on feedback topology, source impedance, supply voltage, operating frequency, and output loading. Because input current is a major error source in high-impedance systems, source resistance should be kept low enough that the amplifier input current does not dominate the signal developed across the source.

Typical uses include photodiode and sensor-interface amplification, low-current-to-voltage converters, precision laboratory instrumentation, and feedback networks in analog measurement equipment. It is also appropriate for applications requiring a general-purpose precision amplifier in an 8-pin through-hole ceramic package rather than a miniature surface-mount package.

Designers should begin by defining the closed-loop gain and required signal bandwidth, then confirm that the 800 kHz gain-bandwidth product provides adequate bandwidth and phase margin. The 0.15 V/us slew rate can become limiting for rapidly changing signals, so output settling and loading should be checked. High-impedance nodes also require guarded layouts, clean power grounding, and minimization of surface leakage.

This product record combines the verified AD705AZ operating characteristics with practical selection guidance, CERDIP-8 packaging information, source links, and engineering-focused considerations for low-current precision measurement.

Pilihan pengganti yang segera untuk AD705AZ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Tiada pilihan pengganti yang segera untuk produk ini.

Minta Alternatif

AD705AZ Penilaian maksimum & Ciri-ciri Elektrik

Amplifier Type Precision operational amplifier
Number of Channels 1 channel
Input Bias Current 100 pA
Input Offset Voltage 150 uV
Gain-Bandwidth Product 800 kHz
Slew Rate 0.15 V/us
Input Architecture Bipolar input
Package Type 8-pin CERDIP
Jenis Pemasangan Through-hole
Manufacturer Analog Devices
Product Category Operational amplifier
Typical Application Precision signal conditioning
Status RoHS Unknown
REACH Status Unknown
AEC-Q100 Qualification Not applicable

Panduan Konfigurasi Pin AD705AZ 8-pin cerdip

Konfigurasi pin untuk AD705AZ (8-pin cerdip pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai 8-pin cerdip untuk AD705AZ

Tiada data garisan pin yang diperoleh untuk AD705AZ.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

AD705AZ patut untuk 6 aplikasis: Photodiode Signal Conditioning, Precision Sensor Interface, Low-Current-to-Voltage Conversion, Laboratory Instrumentation, Precision Feedback Control, Low-Level DC Amplification.

📷

Photodiode Signal Conditioning

The AD705AZ fits low-level photodiode and phototransistor signal-conditioning circuits because its specified input current is only 100 pA. This low-current input stage limits the bias-generated error that can become significant when the sensor impedance is high. Its 800 kHz gain-bandwidth product and 0.15 V/us slew rate support modest-bandwidth precision measurements rather than high-speed photodiode extraction. The amplifier is normally used with a high-value feedback resistor, followed by an offset and gain stage as required. Layout should use guarded input traces, clean ground references, and minimal exposed-area contamination because board leakage can undermine the benefit of the 100 pA specification.

🏭

Precision Sensor Interface

The AD705AZ is appropriate for high-impedance sensor interfaces where the sensor output must be amplified without excessive input-loading error. Its 100 pA input current is the central benefit when the source resistance is large, while the 150 uV input offset voltage helps preserve accuracy for small sensor signals. The 800 kHz gain-bandwidth product is suitable for slowly varying process, temperature, and position measurements, and the 0.15 V/us slew rate limits how quickly large output transitions can occur. Designers should calculate the bias-current error across the actual source resistance and use guarding or differential wiring to reduce leakage and interference at the input node.

⚡

Low-Current-to-Voltage Conversion

The AD705AZ can form the input stage of a low-current-to-voltage converter when the converter must operate close to the amplifier's 100 pA input-current specification. A transimpedance feedback network converts sensor current into voltage, allowing the amplifier's bipolar input architecture to provide low-current measurement capability. Its 800 kHz gain-bandwidth product sets an upper bound for the useful closed-loop bandwidth, and the 0.15 V/us slew rate must be sufficient for the expected output changes. Because parasitic capacitance at a high-impedance summing node can destabilize the loop, the feedback resistor and compensation strategy should be evaluated together using the Analog Devices AD705 datasheet.

🔬

Laboratory Instrumentation

The AD705AZ is suitable for precision laboratory instrumentation that combines relatively high source impedance with modest signal bandwidth. The 100 pA input current reduces bias error in buffer and gain stages, the 150 uV offset specification supports low-level measurement accuracy, and the 800 kHz gain-bandwidth product accommodates slowly varying laboratory signals. Its 0.15 V/us slew rate also defines the large-signal settling capability. In an instrument design, preserve the advantage of low input current by using clean relay contacts, guarded PCB traces, stable reference components, and a low-leakage enclosure around sensitive nodes.

⚙️

Precision Feedback Control

The AD705AZ can be used in a precision feedback loop when the error amplifier must sense a high-impedance node while driving only moderate bandwidth. Its 100 pA input current helps prevent the amplifier input from materially disturbing the feedback node, and its 800 kHz gain-bandwidth product can support loop compensation within a relatively slow control system. The 150 uV offset voltage may contribute to static control error, so it should be included in the error budget. The 0.15 V/us slew rate limits how rapidly the output can respond to error excursions. Stable operation requires evaluating loop gain, phase margin, output loading, and compensation using the device characteristics in the Analog Devices AD705 datasheet.

📈

Low-Level DC Amplification

The AD705AZ fits low-level DC amplification where signal amplitude is small and source impedance is high. The 150 uV input offset voltage is the principal static-error metric, while the 100 pA input current limits leakage-induced error across high resistances. The 800 kHz gain-bandwidth product allows closed-loop gains to be selected according to signal bandwidth and stability requirements, and the 0.15 V/us slew rate governs large-signal capability. For best operation, use low-leakage feedback components, avoid long unprotected input traces, and establish the common-mode and output-voltage limits from the Analog Devices AD705 datasheet before final component selection.

What are the key specifications of AD705AZ that engineers should know?
The AD705AZ is a single-channel bipolar precision operational amplifier with 100 pA input current, 150 uV input offset voltage, 800 kHz gain-bandwidth product, and 0.15 V/us slew rate. According to the Analog Devices AD705 datasheet, the device is intended for picoampere-input-current applications where source leakage and bias current must remain small. It is supplied in an 8-pin CERDIP through-hole package.
What is the operating current of the AD705AZ?
The AD705AZ operating-current limit must be taken from the Analog Devices AD705 datasheet for the exact supply condition. The device is identified as a single-channel bipolar operational amplifier with 100 pA input current, 800 kHz gain-bandwidth product, 0.15 V/us slew rate, and 150 uV offset voltage. Use the datasheet's supply-current table when sizing the power rail and nearby decoupling components.
Where can I download the AD705AZ datasheet PDF?
The AD705AZ datasheet PDF is accessible through the linked Analog Devices AD705 document, which covers the device family associated with AD705AZ. It identifies a picoampere-input-current bipolar operational amplifier with 100 pA input current, 150 uV input offset voltage, 800 kHz gain-bandwidth product, and 0.15 V/us slew rate. Consult its electrical-characteristics table before finalizing supply and biasing values.
Where can I find the AD705AZ pinout?
The AD705AZ pinout should be taken from the pin-description table in the Analog Devices AD705 datasheet. The device uses an 8-pin CERDIP package, and its pin arrangement must be assigned directly from that table when designing the PCB. The AD705AZ is not represented by the generic package-diagram library used on this page, so verify every connection against the manufacturer document before fabrication.
Is AD705AZ suitable for high-impedance sensor measurement?
Yes, the AD705AZ is suitable for high-impedance sensor measurement because its specified input current is only 100 pA. According to the Analog Devices AD705 datasheet, the amplifier also offers 150 uV input offset voltage, 800 kHz gain-bandwidth product, and 0.15 V/us slew rate. These characteristics help limit input-stage error when the sensor and feedback resistances are high.
What can replace AD705AZ?
A direct replacement for the AD705AZ must use an 8-pin CERDIP footprint with pin-to-pin compatibility and comparable input current, offset voltage, bandwidth, and slew rate. The verified AD705 family information identifies the original part as a 100 pA-input-current, 800 kHz bipolar amplifier, but it does not establish a qualified drop-in replacement MPN. Use the Request a Quote form on this page when an exact replacement is required for an approved design.
What is the best cross-brand equivalent for AD705AZ?
No cross-brand drop-in equivalent for the AD705AZ can be confirmed from the available technical information. A valid substitute would need the same 8-pin CERDIP pinout plus suitable 100 pA input current, 150 uV offset voltage, 800 kHz bandwidth, and 0.15 V/us slew-rate performance. Submit the required load, supply, gain, bandwidth, and temperature conditions through the Request a Quote form for engineering review.
AD705AZ versus AD705 family devices - which operating amplifier fits a precision design?
The AD705AZ is the CERDIP-8 orderable member of the AD705 precision-amplifier family, with 100 pA input current, 150 uV offset voltage, 800 kHz gain-bandwidth product, and 0.15 V/us slew rate. According to the Analog Devices AD705 datasheet, the family is built around a bipolar picoampere-input-current architecture. Select AD705AZ when the 8-pin ceramic through-hole package is specifically required by the existing PCB.
When should I choose the AD705AZ for a signal-conditioning circuit?
Choose the AD705AZ when the circuit needs a low-input-current precision amplifier in an 8-pin CERDIP package and operates within the device's 800 kHz bandwidth capability. Its 100 pA input current is advantageous for high source resistance, while its 150 uV offset and 0.15 V/us slew rate define important accuracy and dynamic limits. The Analog Devices AD705 datasheet should guide the final gain, supply, and stability checks.
Can AD705AZ operate as a transimpedance amplifier?
The AD705AZ can be considered for a transimpedance-amplifier function when the required signal bandwidth is compatible with its 800 kHz gain-bandwidth product. Its 100 pA input current helps reduce bias-current error in photodiode and sensor circuits, although the 0.15 V/us slew rate limits large-signal response. The Analog Devices AD705 datasheet and the selected feedback impedance should be checked together.
What limits the AD705AZ bandwidth in an amplifier circuit?
The AD705AZ gain-bandwidth product is 800 kHz, so closed-loop bandwidth, feedback-network impedance, output loading, and stability determine usable performance. Its 0.15 V/us slew rate also limits large-signal response independently of small-signal bandwidth. According to the Analog Devices AD705 datasheet, these are core dynamic specifications to compare against the required signal amplitude and frequency.
Where can I buy AD705AZ and request current lead time?
Use the Request a Quote form on this page to request AD705AZ availability, current unit price, minimum order quantity, and lead time. The component is an 8-pin CERDIP bipolar operational amplifier rated at 100 pA input current, 150 uV offset voltage, 800 kHz gain-bandwidth product, and 0.15 V/us slew rate. Include your required quantity, date code, and shipment destination in the request.
What is the price of AD705AZ?
The current AD705AZ unit price and quantity pricing should be obtained through the Request a Quote form on this page. The part is an obsolete 8-pin CERDIP precision operational amplifier with 100 pA input current, 800 kHz gain-bandwidth product, and 0.15 V/us slew rate. Provide the required quantity and acceptable date-code condition so procurement can return a current quotation.
Is AD705AZ in stock?
Current AD705AZ inventory should be confirmed through the Request a Quote form on this page. The requested quantity should include any required date-code, traceability, or inspection criteria. The device is an 8-pin CERDIP bipolar operational amplifier with 100 pA input current and 800 kHz gain-bandwidth product, so procurement can check the exact packaged part against those requirements.
What design precautions apply to the AD705AZ input bias current?
The AD705AZ's 100 pA input current should be included when calculating error across the source impedance and feedback network. For a 1 Gohm source, 100 pA corresponds to 100 mV of potential error before amplifier gain is considered. The Analog Devices AD705 datasheet should be consulted for the definitive input-current conditions, and the PCB should protect sensitive nodes from contamination and leakage.

Data referensi kejuruteraan untuk AD705AZ — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the AD705AZ when an existing PCB requires an 8-pin CERDIP precision amplifier and the circuit is dominated by input-bias error rather than high-speed signal processing. Its 100 pA input current is the primary reason to select it for high-impedance sensors, low-current measurement, guarding networks, and precision feedback stages. The 800 kHz gain-bandwidth product and 0.15 V/us slew rate make it appropriate for slowly varying or moderate-bandwidth signals, not demanding wideband applications. Do not select a substitute solely from a generic similarity result: a genuine drop-in replacement must match the CERDIP-8 pinout and have suitably comparable bias current, offset voltage, bandwidth, slew rate, supply range, and operating-temperature limits. For a new design, compare the required source impedance, closed-loop gain, signal amplitude, bandwidth, noise target, and supply conditions before deciding whether this legacy package and performance level meet the system requirements.

Perbandingan dengan Gantian

Parametr Produk Ini
Package 8-pin CERDIP
Brand Analog Devices
Number of Channels 1 channel
Input Current 100 pA
Input Offset Voltage 150 uV
Gain-Bandwidth Product 800 kHz
Slew Rate 0.15 V/us
Input Architecture Bipolar

Penyeberangsung Jelas

  • Very low input current for precision measurement (vsGeneral-purpose 8-pin operational amplifiers)
  • Offset and dynamic performance suited to low-level signals (vsHigher-bandwidth precision amplifiers)
  • Legacy ceramic through-hole package (vsSurface-mount precision amplifiers)

Catatan Desain

Calculate bias-current error from the actual source resistance before selecting the gain configuration. The AD705AZ input current is 100 pA, which produces 100 mV of error across a 1 Gohm source before amplification or offset correction. Use the exact input-current conditions from the Analog Devices AD705 datasheet, and avoid long, unprotected input traces because contamination-related board leakage can exceed the specified input current.

Guard the inverting input and feedback-resistor junction when using high-value impedances. Keep the sensitive node physically small, remove flux and contamination after assembly, and avoid routing the guard near unrelated high-impedance or switching nodes. This is particularly important because the AD705AZ's 100 pA input current provides little margin against leakage from contaminated board surfaces or humidity.

Check both bandwidth and slew rate for the intended signal. The 800 kHz gain-bandwidth product limits closed-loop bandwidth, while the 0.15 V/us slew rate limits large-signal transitions and output settling. For transimpedance use, evaluate feedback capacitance and node capacitance together because parasitic capacitance at the summing junction can alter stability even when the nominal bandwidth appears adequate.

Use an 8-pin CERDIP footprint based directly on the manufacturer pin-description table and verify the package orientation, notch, and pin-1 location against the physical drawing. The generic diagram library does not include the ceramic DIP variant, so do not rely on a visually similar package footprint without checking lead spacing, row width, and pin numbering.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the AD705AZ.

Data disahkan pada: 2026-11-18 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

ad705 datasheet AD705AZ datasheet AD705AZ datasheet pdf AD705AZ pinout AD705AZ specifications AD705AZ 100pA input current AD705AZ 800kHz bandwidth AD705AZ replacement AD705AZ equivalent AD705AZ CERDIP-8 AD705AZ price AD705AZ stock

Komponen dan Tanda berkaitan

Analog Devices AD705AZ AD705 operational amplifier precision operational amplifier bipolar operational amplifier picoampere input current input bias current input offset voltage gain-bandwidth product slew rate signal conditioning high-impedance measurement transimpedance amplifier CERDIP-8 through-hole package surface-mount technology feedback network closed-loop gain sensor interface
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ