EPM3128ATI10010N - MAX 3000A CPLD 128MC 100TQFP | Altera
MPN: EPM3128ATI10010N ✓ AktifEPM3128ATI10010N Ringkasan
A Complex Programmable Logic Device (CPLD) is a non-volatile digital IC that integrates multiple PAL/GAL-style logic blocks on a single die, connected through a programmable interconnect matrix. Within the broader taxonomy, a CPLD sits between small SPLDs (single PAL/GAL equivalents) and FPGAs, offering predictable timing, deterministic propagation delays, and instant-on behavior. The MAX 3000A family uses Altera's classic MAX architecture with EEPROM memory cells, providing 100% tested programming retention and 3.3 V in-system programmability (ISP) via IEEE 1149.1 JTAG.
Key features include 128 macro cells distributed across 8 Logic Array Blocks (LABs) of 16 macro cells each, 80 user I/O pins, JTAG boundary-scan test support, and PCI-compliant I/O buffers for the -5, -6, -7, and -10 speed grades. The device supports multi-volt core operation from 3.0 V to 3.6 V and I/O bank voltages of 1.8 V, 2.5 V, or 3.3 V, allowing flexible mixed-voltage interfacing.
The MAX 3000A employs a CMOS EEPROM process with four-product-term macro cell logic, programmable interconnect, and per-pin output enable control. The architecture guarantees fixed propagation delays independent of routing paths, which simplifies static timing closure for glue-logic and bus-interface functions. Designers benefit from deterministic timing ideal for address decoding, state-machine control, and bus arbitration.
Typical applications include bus-interface bridging, peripheral glue logic in microcontroller systems, address decoding, I/O expansion, and legacy system redesigns requiring drop-in CPLD replacement. It is also widely used in industrial control boards and telecom infrastructure where predictable timing and instant-on non-volatile configuration are essential.
When designing with the EPM3128ATI10010N, ensure that I/O bank supply voltages match the logic levels of connected peripherals. JTAG ISP programming requires the TCK, TMS, TDI, and TDO pins to be reserved on the PCB, and unused I/Os should be left floating or driven to a defined state through the Quartus MAX+PLUS II software.
This page synthesizes distributor pricing, pin-compatible drop-in alternatives from the same MAX 3000A family, and practical design notes not consolidated in the original datasheet.
Pilihan pengganti yang segera untuk EPM3128ATI10010N — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera EPM3128ATI10010N (sama faktor bentuk dan kaki) — berbeza dalam Package, Operating Temperature, Propagation Delay (tPD), Usable Gates, Configuration Memory.
EPM3128ATC100-10N
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →EPM3128ATC100-10
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →EPM3128ATC100-10NS
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →EPM3128ATC100-7N
✅ Masuk Drop-In✗ Stok Habis
$3.52 / Unit
Lihat Datasheet →EPM3128ATC100-5N
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →EPM3128ATI100-5N
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →EPM3128ATI10010N Penilaian maksimum & Ciri-ciri Elektrik
| Family | MAX 3000A |
| Device Type | CPLD (Complex Programmable Logic Device) |
| Macro Cells | 128 |
| Logic Array Blocks (LABs) | 8 |
| Usable Gates | 2,500 |
| User I/Os | 80 |
| Bilangan Pin | 100 |
| Kemasan | 100-pin TQFP |
| Jenis Pemasangan | Surface Mount |
| Propagation Delay (tPD) | 10 ns |
| Maximum Internal Frequency | 98 MHz |
| Core Supply Voltage | 3.0 V to 3.6 V |
| I/O Bank Voltage | 1.8 V / 2.5 V / 3.3 V |
| Suhu Operasi | 0 C to +70 C (commercial) |
| Process Technology | CMOS EEPROM |
| Programming Interface | JTAG (IEEE 1149.1) ISP |
| PCI Compliance | Yes (speed grades -5/-6/-7/-10) |
| Status RoHS | unknown |
Panduan Konfigurasi Pin EPM3128ATI10010N 100-pin tqfp
Konfigurasi pin untuk EPM3128ATI10010N (100-pin tqfp pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk EPM3128ATI10010N.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
EPM3128ATI10010N patut untuk 6 aplikasis: Bus Interface Bridging, Address Decoding and Chip-Select Generation, Industrial Control Glue Logic, Legacy System Redesign and Form-Fit Replacements, Telecom Backplane Glue Logic, I/O Expansion and Voltage-Level Translation.
Bus Interface Bridging
The EPM3128ATI10010N is well suited to bridge legacy 8-bit or 16-bit microcontroller buses to modern peripherals because its 80 user I/Os and 128 macro cells comfortably decode multiple chip-select windows simultaneously. With 10 ns pin-to-pin delay at -10 grade, the device meets typical 33 MHz PCI Local Bus timing while remaining deterministic regardless of routing paths. The 3.3 V core with 1.8 V/2.5 V/3.3 V multi-volt I/O banks allows direct connection to 1.8 V modern MCUs without external level shifters, simplifying mixed-voltage board designs and reducing BOM cost.
Disebarkan
Address Decoding and Chip-Select Generation
With 128 macro cells organized into 8 LABs of 16 macro cells each, the EPM3128ATI10010N can decode wide address ranges for memory and peripheral chip-select generation in microprocessor systems. Its 10 ns propagation delay ensures clean, glitch-free select lines even at high system clock rates. The non-volatile EEPROM configuration eliminates boot-time configuration delays typical of SRAM-based FPGAs, enabling instant-on chip-select output at power-up. Industrial temperature grade (-40C to +85C) supports factory and outdoor embedded deployments.
Disebarkan
Industrial Control Glue Logic
The EPM3128ATI10010N serves as the central glue-logic hub in industrial controllers, integrating I/O expander interfaces, watchdog timers, and protocol translation between PLC backplanes and sensor front-ends. Its 80 user I/Os handle multiple 24 V opto-isolated interfaces when paired with external level shifters. Deterministic timing simplifies safety-critical state-machine design where predictable response is mandatory. The JTAG IEEE 1149.1 ISP interface allows in-field firmware updates without removing the board from service.
Disebarkan
Legacy System Redesign and Form-Fit Replacements
Designers maintaining long-lifecycle industrial and telecom equipment use the EPM3128ATI10010N to replace obsolete or damaged CPLDs without PCB rework. The TQFP-100 footprint is identical to EPM3128ATC100-10N, EPM3128ATC100-7N, and other MAX 3000A family members, enabling direct swap when temperature grade and speed grade match the original BOM. EEPROM-based non-volatile configuration preserves design IP across years of field operation. The 3.3 V core minimizes migration risk from 5 V legacy designs that already include 3.3 V rails.
Disebarkan
Telecom Backplane Glue Logic
In telecom backplanes, the EPM3128ATI10010N provides hot-swap control, I2C/SPI management bus bridging, and clock-distribution fan-out with deterministic 10 ns latency. Its 80 user I/Os are sufficient to bridge multiple management buses and discrete status LEDs across line cards. PCI-compliance for grades -5/-6/-7/-10 enables direct interfacing to CompactPCI and AdvancedTCA backplanes. Industrial temperature grade supports outdoor cabinet deployment where ambient temperatures swing widely between -40C and +85C.
Disebarkan
I/O Expansion and Voltage-Level Translation
The EPM3128ATI10010N's multi-volt I/O banks (1.8 V, 2.5 V, 3.3 V) make it an ideal bidirectional voltage translator between modern low-voltage processors and legacy 3.3 V peripherals. With 80 user I/Os distributed across four I/O banks, designers can dedicate each bank to a different voltage domain. The non-volatile EEPROM configuration eliminates the need for external boot ROM, simplifying multi-rail designs. Up to 128 macro cells allow individual direction-control logic per channel when used as a buffered level shifter.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk EPM3128ATI10010N — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | EPM3128ATC100-10N | EPM3128ATC100-10 | EPM3128ATC100-10NS | EPM3128ATC100-7N | EPM3128ATC100-5N | EPM3128ATI100-5N |
|---|---|---|---|---|---|---|---|
| Package | TQFP-100 | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same |
| Brand | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) |
| Macro Cells | 128 | 128 | 128 | 128 | 128 | 128 | 128 |
| Speed Grade | -10 (10 ns tPD) | -10 (10 ns tPD) | -10 (10 ns tPD) | -10 (10 ns tPD) | -7 (7.5 ns tPD, faster) | -5 (faster) | -5 (faster, industrial) |
| Temperature Grade | Industrial (-40C to +85C) | Commercial (0C to +70C) | Commercial (0C to +70C) | Commercial (0C to +70C) | Commercial (0C to +70C) | Commercial (0C to +70C) | Industrial (-40C to +85C) |
| User I/Os | 80 | 80 | 80 | 80 | 80 | 80 | 80 |
| Core Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Programming Interface | JTAG ISP | JTAG ISP | JTAG ISP | JTAG ISP | JTAG ISP | JTAG ISP | JTAG ISP |
Penyeberangsung Jelas
- Industrial temperature grade in TQFP-100 (vsEPM3128ATC100-10N)
- Drop-in upgrade path to faster speed grades (vsEPM3128ATC100-7N)
- EEPROM non-volatile instant-on configuration (vsEPM240T100C5N (MAX II))
Catatan Desain
The EPM3128ATI10010N requires a stable 3.3 V core supply (VCCINT) decoupled with at least one 0.1 uF ceramic capacitor per VCCINT pin placed as close to the package as possible. The I/O bank supplies (VCCIO) can be tied to 1.8 V, 2.5 V, or 3.3 V independently to interface with mixed-voltage peripherals. Add a bulk 10 uF tantalum or ceramic capacitor near the device to suppress transient current spikes during simultaneous output switching across all 80 I/Os. Estimated: total quiescent current is approximately 10-15 mA in normal operation; verify with bench measurement.
Reserve JTAG pins TCK, TMS, TDI, TDO, and TRST on the PCB even if in-system programming is not initially used, because the same pins enable boundary-scan testing during manufacturing. Place decoupling capacitors within 100 mils of their respective supply pins. Keep high-speed I/O traces short and matched when using the device for bus-interface bridging; the 10 ns propagation delay leaves limited timing margin at 100 MHz. Exposed thermal pad is not present on TQFP-100, so no thermal pad soldering is required.
Do not confuse the 'I' suffix (industrial -40C to +85C) with the 'C' suffix (commercial 0C to +70C) when substituting variants - both share the TQFP-100 footprint, so swapping is electrically invisible until field failure. Always confirm device programming voltage compatibility when migrating between MAX 3000A speed grades. Do not connect VCCIO to 5 V; the absolute maximum is 3.6 V. When migrating from EPM3128A to MAX II EPM240T100, note that the JTAG pinout differs and PCB rework is required.
Maklumat Kesediaan
Compliance data not provided in verified web data; RoHS/REACH/lead-free status should be confirmed with the manufacturer (Intel FPGA/Altera) before industrial qualification. The CPLD is not an automotive-grade IC (AEC-Q100 not applicable).