EPM3128ATI10010N - MAX 3000A CPLD 128MC 100TQFP | Altera
MPN: EPM3128ATI10010N ✓ فعالEPM3128ATI10010N جائزہ
A Complex Programmable Logic Device (CPLD) is a non-volatile digital IC that integrates multiple PAL/GAL-style logic blocks on a single die, connected through a programmable interconnect matrix. Within the broader taxonomy, a CPLD sits between small SPLDs (single PAL/GAL equivalents) and FPGAs, offering predictable timing, deterministic propagation delays, and instant-on behavior. The MAX 3000A family uses Altera's classic MAX architecture with EEPROM memory cells, providing 100% tested programming retention and 3.3 V in-system programmability (ISP) via IEEE 1149.1 JTAG.
Key features include 128 macro cells distributed across 8 Logic Array Blocks (LABs) of 16 macro cells each, 80 user I/O pins, JTAG boundary-scan test support, and PCI-compliant I/O buffers for the -5, -6, -7, and -10 speed grades. The device supports multi-volt core operation from 3.0 V to 3.6 V and I/O bank voltages of 1.8 V, 2.5 V, or 3.3 V, allowing flexible mixed-voltage interfacing.
The MAX 3000A employs a CMOS EEPROM process with four-product-term macro cell logic, programmable interconnect, and per-pin output enable control. The architecture guarantees fixed propagation delays independent of routing paths, which simplifies static timing closure for glue-logic and bus-interface functions. Designers benefit from deterministic timing ideal for address decoding, state-machine control, and bus arbitration.
Typical applications include bus-interface bridging, peripheral glue logic in microcontroller systems, address decoding, I/O expansion, and legacy system redesigns requiring drop-in CPLD replacement. It is also widely used in industrial control boards and telecom infrastructure where predictable timing and instant-on non-volatile configuration are essential.
When designing with the EPM3128ATI10010N, ensure that I/O bank supply voltages match the logic levels of connected peripherals. JTAG ISP programming requires the TCK, TMS, TDI, and TDO pins to be reserved on the PCB, and unused I/Os should be left floating or driven to a defined state through the Quartus MAX+PLUS II software.
This page synthesizes distributor pricing, pin-compatible drop-in alternatives from the same MAX 3000A family, and practical design notes not consolidated in the original datasheet.
کے لیے ڈراپ اِن متبادل EPM3128ATI10010N — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں EPM3128ATI10010N (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Operating Temperature, Propagation Delay (tPD), Usable Gates, Configuration Memory.
EPM3128ATC100-10N
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EPM3128ATC100-10
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EPM3128ATC100-10NS
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EPM3128ATC100-7N
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EPM3128ATC100-5N
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EPM3128ATI100-5N
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EPM3128ATI10010N زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Family | MAX 3000A |
| Device Type | CPLD (Complex Programmable Logic Device) |
| Macro Cells | 128 |
| Logic Array Blocks (LABs) | 8 |
| Usable Gates | 2,500 |
| User I/Os | 80 |
| پنز کی تعداد | 100 |
| پیکیج | 100-pin TQFP |
| ماؤنٹنگ ٹائپ | Surface Mount |
| Propagation Delay (tPD) | 10 ns |
| Maximum Internal Frequency | 98 MHz |
| Core Supply Voltage | 3.0 V to 3.6 V |
| I/O Bank Voltage | 1.8 V / 2.5 V / 3.3 V |
| آپریٹنگ درجہ حرارت | 0 C to +70 C (commercial) |
| Process Technology | CMOS EEPROM |
| Programming Interface | JTAG (IEEE 1149.1) ISP |
| PCI Compliance | Yes (speed grades -5/-6/-7/-10) |
| RoHS اسٹیٹس | unknown |
EPM3128ATI10010N 100-pin tqfp پن کنفیگریشن گائیڈ
EPM3128ATI10010N (100-pin tqfp پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں EPM3128ATI10010N.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
EPM3128ATI10010N کے لیے موزوں ہے 6 ایپلیکیشنs: Bus Interface Bridging, Address Decoding and Chip-Select Generation, Industrial Control Glue Logic, Legacy System Redesign and Form-Fit Replacements, Telecom Backplane Glue Logic, I/O Expansion and Voltage-Level Translation.
Bus Interface Bridging
The EPM3128ATI10010N is well suited to bridge legacy 8-bit or 16-bit microcontroller buses to modern peripherals because its 80 user I/Os and 128 macro cells comfortably decode multiple chip-select windows simultaneously. With 10 ns pin-to-pin delay at -10 grade, the device meets typical 33 MHz PCI Local Bus timing while remaining deterministic regardless of routing paths. The 3.3 V core with 1.8 V/2.5 V/3.3 V multi-volt I/O banks allows direct connection to 1.8 V modern MCUs without external level shifters, simplifying mixed-voltage board designs and reducing BOM cost.
تجویز کردہ
Address Decoding and Chip-Select Generation
With 128 macro cells organized into 8 LABs of 16 macro cells each, the EPM3128ATI10010N can decode wide address ranges for memory and peripheral chip-select generation in microprocessor systems. Its 10 ns propagation delay ensures clean, glitch-free select lines even at high system clock rates. The non-volatile EEPROM configuration eliminates boot-time configuration delays typical of SRAM-based FPGAs, enabling instant-on chip-select output at power-up. Industrial temperature grade (-40C to +85C) supports factory and outdoor embedded deployments.
تجویز کردہ
Industrial Control Glue Logic
The EPM3128ATI10010N serves as the central glue-logic hub in industrial controllers, integrating I/O expander interfaces, watchdog timers, and protocol translation between PLC backplanes and sensor front-ends. Its 80 user I/Os handle multiple 24 V opto-isolated interfaces when paired with external level shifters. Deterministic timing simplifies safety-critical state-machine design where predictable response is mandatory. The JTAG IEEE 1149.1 ISP interface allows in-field firmware updates without removing the board from service.
تجویز کردہ
Legacy System Redesign and Form-Fit Replacements
Designers maintaining long-lifecycle industrial and telecom equipment use the EPM3128ATI10010N to replace obsolete or damaged CPLDs without PCB rework. The TQFP-100 footprint is identical to EPM3128ATC100-10N, EPM3128ATC100-7N, and other MAX 3000A family members, enabling direct swap when temperature grade and speed grade match the original BOM. EEPROM-based non-volatile configuration preserves design IP across years of field operation. The 3.3 V core minimizes migration risk from 5 V legacy designs that already include 3.3 V rails.
تجویز کردہ
Telecom Backplane Glue Logic
In telecom backplanes, the EPM3128ATI10010N provides hot-swap control, I2C/SPI management bus bridging, and clock-distribution fan-out with deterministic 10 ns latency. Its 80 user I/Os are sufficient to bridge multiple management buses and discrete status LEDs across line cards. PCI-compliance for grades -5/-6/-7/-10 enables direct interfacing to CompactPCI and AdvancedTCA backplanes. Industrial temperature grade supports outdoor cabinet deployment where ambient temperatures swing widely between -40C and +85C.
تجویز کردہ
I/O Expansion and Voltage-Level Translation
The EPM3128ATI10010N's multi-volt I/O banks (1.8 V, 2.5 V, 3.3 V) make it an ideal bidirectional voltage translator between modern low-voltage processors and legacy 3.3 V peripherals. With 80 user I/Os distributed across four I/O banks, designers can dedicate each bank to a different voltage domain. The non-volatile EEPROM configuration eliminates the need for external boot ROM, simplifying multi-rail designs. Up to 128 macro cells allow individual direction-control logic per channel when used as a buffered level shifter.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا EPM3128ATI10010N — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | EPM3128ATC100-10N | EPM3128ATC100-10 | EPM3128ATC100-10NS | EPM3128ATC100-7N | EPM3128ATC100-5N | EPM3128ATI100-5N |
|---|---|---|---|---|---|---|---|
| Package | TQFP-100 | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same |
| Brand | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) |
| Macro Cells | 128 | 128 | 128 | 128 | 128 | 128 | 128 |
| Speed Grade | -10 (10 ns tPD) | -10 (10 ns tPD) | -10 (10 ns tPD) | -10 (10 ns tPD) | -7 (7.5 ns tPD, faster) | -5 (faster) | -5 (faster, industrial) |
| Temperature Grade | Industrial (-40C to +85C) | Commercial (0C to +70C) | Commercial (0C to +70C) | Commercial (0C to +70C) | Commercial (0C to +70C) | Commercial (0C to +70C) | Industrial (-40C to +85C) |
| User I/Os | 80 | 80 | 80 | 80 | 80 | 80 | 80 |
| Core Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Programming Interface | JTAG ISP | JTAG ISP | JTAG ISP | JTAG ISP | JTAG ISP | JTAG ISP | JTAG ISP |
اہم امتیازی خصوصیات
- Industrial temperature grade in TQFP-100 (بمقابلہEPM3128ATC100-10N)
- Drop-in upgrade path to faster speed grades (بمقابلہEPM3128ATC100-7N)
- EEPROM non-volatile instant-on configuration (بمقابلہEPM240T100C5N (MAX II))
ڈیزائن نوٹس
The EPM3128ATI10010N requires a stable 3.3 V core supply (VCCINT) decoupled with at least one 0.1 uF ceramic capacitor per VCCINT pin placed as close to the package as possible. The I/O bank supplies (VCCIO) can be tied to 1.8 V, 2.5 V, or 3.3 V independently to interface with mixed-voltage peripherals. Add a bulk 10 uF tantalum or ceramic capacitor near the device to suppress transient current spikes during simultaneous output switching across all 80 I/Os. Estimated: total quiescent current is approximately 10-15 mA in normal operation; verify with bench measurement.
Reserve JTAG pins TCK, TMS, TDI, TDO, and TRST on the PCB even if in-system programming is not initially used, because the same pins enable boundary-scan testing during manufacturing. Place decoupling capacitors within 100 mils of their respective supply pins. Keep high-speed I/O traces short and matched when using the device for bus-interface bridging; the 10 ns propagation delay leaves limited timing margin at 100 MHz. Exposed thermal pad is not present on TQFP-100, so no thermal pad soldering is required.
Do not confuse the 'I' suffix (industrial -40C to +85C) with the 'C' suffix (commercial 0C to +70C) when substituting variants - both share the TQFP-100 footprint, so swapping is electrically invisible until field failure. Always confirm device programming voltage compatibility when migrating between MAX 3000A speed grades. Do not connect VCCIO to 5 V; the absolute maximum is 3.6 V. When migrating from EPM3128A to MAX II EPM240T100, note that the JTAG pinout differs and PCB rework is required.
تعمیل کی معلومات
Compliance data not provided in verified web data; RoHS/REACH/lead-free status should be confirmed with the manufacturer (Intel FPGA/Altera) before industrial qualification. The CPLD is not an automotive-grade IC (AEC-Q100 not applicable).