AMD

XC7A75T-1FGG484C - 75,520-Cell Artix-7 FPGA | AMD Xilinx

MPN: XC7A75T-1FGG484C ✓ Aktif
1 V Vdss 484-pin FGG484 flip-chip BGA Package -1 Speed
MOQ: 1 |

XC7A75T-1FGG484C Ringkasan

AMD Xilinx XC7A75T-1FGG484C is an Artix-7 field-programmable gate array with 75,520 logic cells, 285 I/O, 8 GTP transceivers, and 180 DSP slices, manufactured on 28 nm CMOS technology and housed in a 484-pin FGG484 flip-chip BGA package. The -1 speed grade targets performance-oriented designs, while the commercial C temperature designation identifies the intended operating temperature range.

An FPGA is a configurable semiconductor whose logic, interconnect, memory, DSP, and I/O resources can be programmed after manufacture. The Artix-7 family occupies the FPGA hierarchy between lower-density programmable logic and larger FPGA and adaptive-computing products. It combines programmable digital logic, dedicated DSP blocks, block RAM, high-speed serial transceivers, and parallel I/O in one package for embedded control, signal processing, communications, and industrial automation systems.

The XC7A75T-1FGG484C provides 75,520 logic cells for parallel data paths and control logic, 285 user I/O for external interfaces, and 180 DSP slices for filtering, transforms, and other arithmetic-heavy operations. Its eight GTP transceivers support high-speed serial links, while the large flip-chip package provides extensive pin connectivity. These resources allow multiple subsystems to be consolidated without requiring several separate programmable devices.

The device uses 28 nm CMOS technology and is identified with a nominal 1 V core supply. Its architecture combines programmable logic and DSP resources with dedicated transceivers, allowing serial communication, control, and digital signal processing to operate within one device. The FGG484 package is a compact 484-ball organic flip-chip BGA, but its fine pitch and thermal requirements make careful PCB layout, power delivery, and heat dissipation essential.

Typical applications include industrial motor control, programmable logic controllers, machine vision, sensor processing, video image pipelines, communications infrastructure, and embedded test equipment. The 180 DSP slices are especially useful when a design repeatedly performs filtering, correlation, waveform generation, or other fixed-point operations. The eight GTP transceivers can reduce external serialization hardware when the board interface is based on high-speed serial links.

For a new design, confirm the exact package pinout, power-decoupling topology, configuration interface, clocking, and transceiver requirements in the AMD Artix-7 documentation before PCB release. The FGG484 package is not a leaded through-hole design, so BGA assembly capability, solder-ball inspection, adequate layer count, via geometry, and thermal analysis can materially affect manufacturing yield and long-term reliability.

This page combines the verified device identity, package and resource specifications, speed-grade alternatives, structured comparisons, and application-specific design guidance to support component selection and board planning for the XC7A75T-1FGG484C.

Pilihan pengganti yang segera untuk XC7A75T-1FGG484C — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera XC7A75T-1FGG484C (sama faktor bentuk dan kaki) — berbeza dalam Package, Device Type, Process Technology, Logic Cells, Core Supply Voltage.

AMD
Package: 484-BBGA
Device Type: Artix-7 FPGA
Logic Cells: 75,520
Bandingkan Dengan XC7A75T-1FGG484C →
AMD
Device Type: Artix-7 field-programmable gate array (FPGA)
Process Technology: 28 nm High-K Metal Gate (HKMG)
Bandingkan Dengan XC7A75T-1FGG484C →
AMD
Package: FGG484 BGA, 484 terminals
Device Type: Artix-7 field-programmable gate array
Process Technology: 28 nm
Bandingkan Dengan XC7A75T-1FGG484C →
AMD
Core Supply Voltage: 950 mV to 1.05 V
Bandingkan Dengan XC7A75T-1FGG484C →
AMD
Package: 484-pin FBGA (FGG484)
Device Type: Artix-7 field-programmable gate array (FPGA)
Bandingkan Dengan XC7A75T-1FGG484C →
AMD
Package: 484-ball FBGA (FGG484)
Process Technology: 28nm CMOS
Logic Cells: 75520
Bandingkan Dengan XC7A75T-1FGG484C →
AMD
Package: 484-FBGA (FGG484), 17 mm x 17 mm, 0.8 mm pitch
Device Type: Field Programmable Gate Array (FPGA), SRAM-based
Logic Cells: 75,520
Bandingkan Dengan XC7A75T-1FGG484C →

XC7A75T-2FGG484C

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
AMD
📦 FGG484
Artix-7 field-programmable gate array (FPGA) · 75,520 cells · 28 nm CMOS · 1 V · 0.95 V to 1.05 V · 1286 MHz · 285 inputs · 285 outputs

Hubungi untuk harga

Lihat Datasheet →

XC7A75T-1FGG484I

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
AMD
📦 FGG484
Artix-7 Field Programmable Gate Array (FPGA) · 75,520 cells · 285 I/O · 464 MHz · 950 mV to 1.05 V · FCBGA-484 · 484 balls · MMCM and PLL

Hubungi untuk harga

Lihat Datasheet →

XC7A75T-2FGG484I

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
AMD
📦 FGG484
Artix-7 · 75520 · 285 · 3870720 bits · 484-ball FBGA (FGG484) · 28nm CMOS · 1 V · -2

Hubungi untuk harga

Lihat Datasheet →

XC7A75T-3FGG484C

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 FGG484
Speed grade increases from -1 to -3, adding two timing-grade steps while retaining the same Artix-7 logic, DSP, I/O, transceiver, and FGG484 package resources.

📋 Alternatif rujukan (tidak dalam katalog)

XC7A75T-3FGG484E

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
AMD
📦 FGG484
Field Programmable Gate Array (FPGA), SRAM-based · Artix-7 · 75,520 · 285 · 628 MHz · -3 (performance grade) · 484-FBGA (FGG484), 17 mm x 17 mm, 0.8 mm pitch · Surface Mount

Hubungi untuk harga

Lihat Datasheet →

XC7A75T-1FGG484C Penilaian maksimum & Ciri-ciri Elektrik

Device Type Artix-7 Field Programmable Gate Array (FPGA)
Logic Cells 75,520 cells
User I/O 285 I/O
GTP Transceivers 8 transceivers
DSP Slices 180 slices
Process Technology 28 nm CMOS
Core Supply Voltage 1 V
Speed Grade -1
Temperature Grade Commercial (C)
Kemasan 484-pin FGG484 flip-chip BGA
Package Type 484-BBGA organic flip-chip BGA
Programmable Logic Configurable FPGA logic and interconnect
Digital Signal Processing 180 dedicated DSP slices
High-Speed Serial I/O 8 GTP transceivers
Status RoHS Compliant
Jenis Pemasangan Surface mount

Panduan Konfigurasi Pin XC7A75T-1FGG484C 484-bbga organic flip-chip bga

Konfigurasi pin untuk XC7A75T-1FGG484C (484-bbga organic flip-chip bga pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 484-bbga organic flip-chip bga untuk XC7A75T-1FGG484C

Tiada data garisan pin yang diperoleh untuk XC7A75T-1FGG484C.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

XC7A75T-1FGG484C patut untuk 6 aplikasis: Industrial Motor Control, Machine Vision and Image Processing, Programmable Logic Controller, Industrial Sensor Fusion, High-Speed Communications Equipment, Test and Measurement Instrumentation.

🏭

Industrial Motor Control

The XC7A75T-1FGG484C fits industrial motor-control systems that combine deterministic sequencing, sensor acquisition, communications, and protection logic. Its 75,520 logic cells can host control algorithms and state machines, while 285 I/O provide connectivity for encoders, gate drivers, interlocks, and external converters. The 180 DSP slices can accelerate filtering or arithmetic operations without occupying general-purpose logic. Placing these functions in one FPGA reduces component count and improves synchronization. The primary design check is timing closure at the selected -1 speed grade, particularly for current-loop and position-loop paths that must meet deterministic deadlines.

📺

Machine Vision and Image Processing

The XC7A75T-1FGG484C supports machine-vision pipelines that must capture pixels, perform parallel processing, and transfer results with low latency. Its 180 DSP slices are suitable for filtering, correlation, and fixed-point transforms, while programmable logic can manage camera timing, line and frame counters, thresholds, and control interfaces. The 285 I/O provide parallel sensor connectivity for common image sensors and industrial cameras. By combining acquisition and processing in one FPGA, designers can reduce off-chip data transfers and improve deterministic response. Video timing and image-data bandwidth should be checked against the device resource budget before committing to a frame rate and resolution.

🔧

Programmable Logic Controller

The XC7A75T-1FGG484C is suitable for programmable logic controller and industrial control platforms requiring parallel I/O, deterministic logic, and flexible hardware configuration. The 75,520 logic cells can implement multiple scan tasks, communication protocols, motion sequencing, and diagnostic functions, while the 285 I/O support field-bus transceivers, discrete sensors, relays, and operator interfaces. Dedicated DSP resources can accelerate signal conditioning or power calculations without sacrificing basic control logic. The commercial-grade part should be selected only after confirming the enclosure temperature range, vibration profile, and long-term availability. For connected systems, the eight GTP transceivers may also simplify high-speed communication links.

🧩

Industrial Sensor Fusion

The XC7A75T-1FGG484C can combine measurements from multiple sensors in a single programmable data-acquisition system. Its 285 I/O accommodate digital sensors and parallel converters, while programmable logic handles sampling control, calibration, filtering, and timestamp coordination. The 180 DSP slices support real-time filtering, correlation, spectrum analysis, and custom weighting functions that would otherwise burden a microcontroller. Eight GTP transceivers provide a path to high-speed sensor or test equipment when the interface protocol requires it. Power, grounding, and clock distribution must be designed as one complete signal chain because converter noise or clock jitter can directly affect the achieved resolution and repeatability of the measurements.

🌐

High-Speed Communications Equipment

The XC7A75T-1FGG484C fits communications equipment requiring eight high-speed serial transceivers alongside programmable backhaul and control logic. The GTP blocks can support links to processors, network devices, converters, and test equipment, while 75,520 logic cells implement framing, lane alignment, CRC, error handling, and protocol adaptation. The 180 DSP slices can assist with channelization, filtering, or modulation-related arithmetic. A practical design should allocate transceiver pins and adjacent support components according to the Artix-7 layout guidance, because high-speed differential routing and supply isolation are as important as FPGA logic performance. The selected -1 speed grade must also satisfy the timing budget for the implemented serial interface.

⚡

Test and Measurement Instrumentation

The XC7A75T-1FGG484C is appropriate for modular test and measurement equipment requiring programmable acquisition, pattern generation, real-time analysis, and flexible control. The large parallel I/O count can connect to converters, memory, relay matrices, or fixture control lines, while the DSP slices accelerate FIR filters, waveform transforms, and numerical correction. Eight GTP transceivers can connect the FPGA to high-speed instruments or modules without requiring a separate link device. Because instrumentation accuracy depends on reference-clock quality and power-supply integrity, designers should isolate analog and digital sections, control impedance, and include self-calibration paths. Timing closure should be checked for sampling boundaries as well as the user-interface logic.

What are the key specifications of XC7A75T-1FGG484C that engineers should know?
The XC7A75T-1FGG484C is a 28 nm Artix-7 FPGA with 75,520 logic cells, 285 user I/O, 180 DSP slices, and 8 GTP transceivers in a 484-pin FGG484 package. It uses a -1 speed grade and a commercial temperature designation. The AMD Artix-7 FPGAs Data Sheet identifies the device as part of the Artix-7 low-cost, low-power FPGA family, while the package documentation defines the FGG484 ball assignments and board requirements.
What is the logic and DSP capacity of the XC7A75T-1FGG484C?
The XC7A75T-1FGG484C provides 75,520 logic cells and 180 dedicated DSP slices. This combination supports parallel control logic alongside repeated filtering, correlation, Fourier-transform, and fixed-point arithmetic operations. According to the AMD Artix-7 FPGAs Data Sheet, the Artix-7 architecture integrates programmable logic, DSP blocks, block RAM, high-speed transceivers, and advanced interconnect resources within a single device.
Which package is used for the XC7A75T-1FGG484C?
The XC7A75T-1FGG484C uses the 484-pin FGG484 organic flip-chip BGA package. The package is surface-mounted and does not use leaded through-hole connections, so the layout must accommodate the manufacturer's ball map and escape-routing requirements. AMD provides Artix-7 package pinout files based on the package-device documentation referenced by UG475.
How many I/O and GTP transceivers does the XC7A75T-1FGG484C have?
The XC7A75T-1FGG484C has 285 user I/O and 8 GTP transceivers. The parallel I/O can connect control signals, memory interfaces, converters, and digital buses, while the GTP blocks support high-speed serial communication. The exact usable count in a finished design depends on the selected package pins, power rails, clocking scheme, configuration method, and signal-integrity constraints.
Where can I download the XC7A75T-1FGG484C datasheet PDF?
The XC7A75T-1FGG484C datasheet can be downloaded from the Artix-7 FPGAs Data Sheet link listed on this page. AMD also publishes separate Artix-7 package pinout files and related configuration, clocking, and PCB-design guidance. Use the exact XC7A75T-1FGG484C ordering code when selecting speed, temperature, and package information because the generic XC7A75T document covers multiple configurations.
Where can I find the XC7A75T-1FGG484C pinout and FGG484 package information?
The XC7A75T-1FGG484C pinout is defined by AMD's Artix-7 package pinout files for the FGG484 package. Those files are published in TXT and CSV formats and are intended for use with the package-device documentation referenced by UG475. Before assigning PCB nets, cross-check the complete ball map, power pins, configuration pins, transceiver pins, and exposed thermal requirements against the selected device revision.
Where to buy XC7A75T-1FGG484C online?
Use the Request a Quote form on this page to request XC7A75T-1FGG484C availability, current commercial terms, and production quantity support. The form lets you identify the exact -1 speed grade, commercial C temperature grade, and 484-pin FGG484 package without substituting another FPGA. For time-sensitive builds, include your target quantity, date code requirements, and assembly packaging requirements in the request.
What is the price of XC7A75T-1FGG484C?
The current commercial terms for the XC7A75T-1FGG484C are available through the Request a Quote form on this page. Quote requests should specify the required quantity, FGG484 package, -1 speed grade, commercial temperature grade, and acceptable date-code range. This approach also allows sourcing to account for production allocation, inspection requirements, and your requested delivery schedule.
What is the lead time for XC7A75T-1FGG484C?
The current lead time and available production quantity for the XC7A75T-1FGG484C should be confirmed through the Request a Quote form on this page. Lead time can change with device allocation, order volume, date-code constraints, and customer scheduling, so a firm date requires the complete purchasing requirement. Include the intended release date and required assembly quantity when requesting the quotation.
Is XC7A75T-1FGG484C in stock?
Current XC7A75T-1FGG484C inventory status should be obtained through the Request a Quote form on this page. The request can state whether an immediate shipment is required and whether a specific date code, tray format, or inspection standard must be accommodated. Because FPGA supply can be constrained, submit the quantity and production schedule with the request rather than relying on an unconfirmed inventory statement.
XC7A75T-1FGG484C vs XC7A75T-2FGG484C — which is better for a new design?
The XC7A75T-2FGG484C is the better choice when maximum timing performance matters, while the XC7A75T-1FGG484C is appropriate when the lower speed grade satisfies the design at a potentially more favorable commercial outcome. Both retain the same Artix-7 device identity, 75,520 logic cells, 285 I/O, 180 DSP slices, and FGG484 package, but their timing-grade designation differs by one speed step.
When should I choose XC7A75T-1FGG484C over XC7A75T-2FGG484C?
Choose XC7A75T-1FGG484C when timing analysis confirms that the -1 speed grade meets clock, setup, and hold requirements. The -2 grade is preferable for higher operating performance or more conservative timing margin. Because both devices use the FGG484 package, the choice is primarily a performance, qualification, availability, and commercial decision rather than a PCB-footprint decision.
Is XC7A75T-1FGG484C suitable for industrial automation and motor control?
The XC7A75T-1FGG484C is suitable for industrial automation and motor-control logic when its -1 speed grade meets the control-loop timing budget. Its 75,520 logic cells, 285 I/O, and 180 DSP slices support sequencing, communications, conditioning, and control functions. The commercial C temperature designation must be checked against the actual enclosure temperature range and industrial environmental requirements.
What is the best drop-in replacement for XC7A75T-1FGG484C?
The closest pin-compatible choices are same-family XC7A75T devices in the FGG484 package, including XC7A75T-2FGG484C, XC7A75T-1FGG484I, XC7A75T-2FGG484I, and XC7A75T-3FGG484C. These alternatives differ in speed grade or temperature grade, so the replacement must meet both the PCB-bump pattern and timing, environmental, qualification, and sourcing requirements.
Can XC7A75T-2FGG484I replace XC7A75T-1FGG484C without PCB changes?
The XC7A75T-2FGG484I can use the same FGG484 footprint, but it is not an unconditional functional substitute for the XC7A75T-1FGG484C. It provides a faster -2 speed grade and an industrial I temperature grade rather than the commercial C grade. Confirm timing margins, environmental requirements, qualification, power behavior, and configuration details before treating it as a drop-in replacement.
What is the best AMD Xilinx equivalent for XC7A75T-1FGG484C?
The best AMD Xilinx equivalent depends on whether priority is speed or environmental grade: XC7A75T-2FGG484C provides a higher speed grade, XC7A75T-1FGG484I provides an industrial temperature grade, and XC7A75T-2FGG484I combines both changes. All retain the XC7A75T FGG484 package family, but a valid replacement still requires confirming timing, temperature, qualification, and lifecycle requirements.

Data referensi kejuruteraan untuk XC7A75T-1FGG484C — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the XC7A75T-1FGG484C when an Artix-7 design fits within the -1 timing grade, requires 75,520 logic cells, 285 I/O, 180 DSP slices, and 8 GTP transceivers, and operates within the commercial temperature envelope. Select XC7A75T-2FGG484C when the same electrical resources and PCB footprint are needed but additional timing performance is beneficial. Use XC7A75T-1FGG484I when industrial temperature coverage is required without increasing the speed grade, and XC7A75T-2FGG484I when both industrial temperature coverage and higher performance are priorities. XC7A75T-3FGG484C or XC7A75T-3FGG484E can suit designs demanding more timing margin, but the higher grades should be selected only after post-route timing analysis confirms the need. Before approving any substitution, verify the exact package files, configuration compatibility, power constraints, clock requirements, and environmental requirements.

Perbandingan dengan Gantian

Parametr Produk Ini XC7A75T-2FGG484C XC7A75T-1FGG484I XC7A75T-2FGG484I XC7A75T-3FGG484C XC7A75T-3FGG484E
Brand AMD AMD AMD AMD AMD AMD
Package FGG484 FGG484 - same FGG484 - same FGG484 - same FGG484 - same FGG484 - same
FPGA Family Artix-7 Artix-7 Artix-7 Artix-7 Artix-7 Artix-7
Logic Cells 75,520 cells 75,520 cells 75,520 cells 75,520 cells 75,520 cells 75,520 cells
User I/O 285 I/O 285 I/O 285 I/O 285 I/O 285 I/O 285 I/O
DSP Slices 180 slices 180 slices 180 slices 180 slices 180 slices 180 slices
GTP Transceivers 8 transceivers 8 transceivers 8 transceivers 8 transceivers 8 transceivers 8 transceivers
Speed Grade -1 -2 -1 -2 -3 -3
Temperature Grade Commercial (C) Commercial (C) Industrial (I) Industrial (I) Commercial (C) Extended (E)
Process Technology 28 nm CMOS 28 nm CMOS 28 nm CMOS 28 nm CMOS 28 nm CMOS 28 nm CMOS

Penyeberangsung Jelas

  • Balanced combination of programmable logic, DSP, and serial connectivity (vsXC7A75T-2FGG484C)
  • Commercial-temperature configuration with a direct higher-speed option (vsXC7A75T-2FGG484C)
  • Exact -1 speed option for systems requiring industrial temperature coverage (vsXC7A75T-2FGG484I)
  • Integrated signal-processing capacity reduces parallel device count (vsXC7A75T-3FGG484E)

Catatan Desain

Use the AMD Artix-7 FGG484 package pinout files as the authoritative starting point for every ball assignment. Preserve the exact power, ground, configuration, clock, and transceiver connections shown for XC7A75T; shared balls across smaller or faster grade options must not be assumed interchangeable without checking the device package file. The FGG484 footprint also requires escape routing that respects the manufacturer's ball geometry and PCB manufacturing capability.

Plan the power rails as a complete distribution network rather than isolated voltage connections. The core operates from a nominal 1 V supply, so rail routing, decoupling, return-current continuity, and plane or polygon connections must control impedance and noise. Place the required decoupling capacitors at the appropriate supply and ground balls, keep high-current paths short, and separate sensitive clock or analog input routing from switching and high-current nodes.

Perform thermal analysis with the actual FPGA utilization, core voltage, ambient temperature, board construction, and enclosure airflow. A 484-ball flip-chip BGA can move substantial heat through its solder balls and package into the PCB, but copper planes alone do not guarantee adequate junction-temperature margin. Use the package power and thermal model to determine whether spreading copper, additional layers, or board-level cooling is required.

Route GTP differential pairs as controlled-impedance, length-matched connections with symmetrical return paths, and follow the Artix-7 transceiver layout and reference-plane guidance. Keep configuration and clock paths away from switching nodes, and provide clean reference voltages where the design requires them. Because the FGG484 footprint is fine-pitch, verify drill-to-copper clearance, via-in-pad policy, solder mask design, and assembly capability with the selected PCB manufacturer before release.

Do not treat the -1, -2, or -3 suffix as a cosmetic ordering change. Timing closure can differ materially between speed grades even though the logic-cell, I/O, DSP, and transceiver counts remain similar. Likewise, C, I, and E temperature designations alter the permissible environmental envelope. Confirm both performance and environmental requirements, then rerun timing, power, and thermal sign-off using the exact selected ordering code.

Maklumat Kesediaan

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

RoHS compliance is identified for the exact MPN. Other environmental, material, and automotive qualification attributes require confirmation from current AMD documentation or a supplier declaration.

Pencarian Berhubungan

xc7a75t 1fgg484c xc7a75t 2fgg484i xc7a75t 2fgg676i xc7a75t fgg484 xc7a75t 3fgg484e xc7a75t 1csg324c xc7a75t 2fgg676c xc7a75t 2ftg256c XC7A75T-1FGG484C datasheet XC7A75T-1FGG484C pinout XC7A75T-1FGG484C equivalent XC7A75T-1FGG484C replacement XC7A75T-1FGG484C price AMD XC7A75T-1FGG484C

Komponen dan Tanda berkaitan

AMD AMD Xilinx XC7A75T-1FGG484C XC7A75T-2FGG484C XC7A75T-1FGG484I XC7A75T-2FGG484I XC7A75T-3FGG484C XC7A75T-3FGG484E Artix-7 FPGA field-programmable gate array programmable logic 28 nm CMOS FGG484 484-ball organic flip-chip BGA surface-mount semiconductor 75,520 logic cells 285 user I/O 180 DSP slices 8 GTP transceivers 1 V core supply machine vision industrial automation motor control high-speed serial communication
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ