XC7A75T-1FGG484C - 75,520-Cell Artix-7 FPGA | AMD Xilinx
料号: XC7A75T-1FGG484C ✓ 量产中XC7A75T-1FGG484C 概述
An FPGA is a configurable semiconductor whose logic, interconnect, memory, DSP, and I/O resources can be programmed after manufacture. The Artix-7 family occupies the FPGA hierarchy between lower-density programmable logic and larger FPGA and adaptive-computing products. It combines programmable digital logic, dedicated DSP blocks, block RAM, high-speed serial transceivers, and parallel I/O in one package for embedded control, signal processing, communications, and industrial automation systems.
The XC7A75T-1FGG484C provides 75,520 logic cells for parallel data paths and control logic, 285 user I/O for external interfaces, and 180 DSP slices for filtering, transforms, and other arithmetic-heavy operations. Its eight GTP transceivers support high-speed serial links, while the large flip-chip package provides extensive pin connectivity. These resources allow multiple subsystems to be consolidated without requiring several separate programmable devices.
The device uses 28 nm CMOS technology and is identified with a nominal 1 V core supply. Its architecture combines programmable logic and DSP resources with dedicated transceivers, allowing serial communication, control, and digital signal processing to operate within one device. The FGG484 package is a compact 484-ball organic flip-chip BGA, but its fine pitch and thermal requirements make careful PCB layout, power delivery, and heat dissipation essential.
Typical applications include industrial motor control, programmable logic controllers, machine vision, sensor processing, video image pipelines, communications infrastructure, and embedded test equipment. The 180 DSP slices are especially useful when a design repeatedly performs filtering, correlation, waveform generation, or other fixed-point operations. The eight GTP transceivers can reduce external serialization hardware when the board interface is based on high-speed serial links.
For a new design, confirm the exact package pinout, power-decoupling topology, configuration interface, clocking, and transceiver requirements in the AMD Artix-7 documentation before PCB release. The FGG484 package is not a leaded through-hole design, so BGA assembly capability, solder-ball inspection, adequate layer count, via geometry, and thermal analysis can materially affect manufacturing yield and long-term reliability.
This page combines the verified device identity, package and resource specifications, speed-grade alternatives, structured comparisons, and application-specific design guidance to support component selection and board planning for the XC7A75T-1FGG484C.
直接替换替代料: XC7A75T-1FGG484C ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: XC7A75T-1FGG484C (相同外形与封装尺寸) ——差异在于 Package, Device Type, Process Technology, Logic Cells, Core Supply Voltage.
XC7A75T-2FGG484C
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →XC7A75T-1FGG484I
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →XC7A75T-2FGG484I
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →XC7A75T-3FGG484C
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
XC7A75T-3FGG484E
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →XC7A75T-1FGG484C 最大额定值与电气特性
| Device Type | Artix-7 Field Programmable Gate Array (FPGA) |
| Logic Cells | 75,520 cells |
| User I/O | 285 I/O |
| GTP Transceivers | 8 transceivers |
| DSP Slices | 180 slices |
| Process Technology | 28 nm CMOS |
| Core Supply Voltage | 1 V |
| Speed Grade | -1 |
| Temperature Grade | Commercial (C) |
| 封装 | 484-pin FGG484 flip-chip BGA |
| Package Type | 484-BBGA organic flip-chip BGA |
| Programmable Logic | Configurable FPGA logic and interconnect |
| Digital Signal Processing | 180 dedicated DSP slices |
| High-Speed Serial I/O | 8 GTP transceivers |
| RoHS 状态 | Compliant |
| 安装类型 | Surface mount |
XC7A75T-1FGG484C 484-bbga organic flip-chip bga 引脚配置指南
XC7A75T-1FGG484C(484-bbga organic flip-chip bga 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: XC7A75T-1FGG484C.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XC7A75T-1FGG484C 适用于 6 应用s: Industrial Motor Control, Machine Vision and Image Processing, Programmable Logic Controller, Industrial Sensor Fusion, High-Speed Communications Equipment, Test and Measurement Instrumentation.
Industrial Motor Control
The XC7A75T-1FGG484C fits industrial motor-control systems that combine deterministic sequencing, sensor acquisition, communications, and protection logic. Its 75,520 logic cells can host control algorithms and state machines, while 285 I/O provide connectivity for encoders, gate drivers, interlocks, and external converters. The 180 DSP slices can accelerate filtering or arithmetic operations without occupying general-purpose logic. Placing these functions in one FPGA reduces component count and improves synchronization. The primary design check is timing closure at the selected -1 speed grade, particularly for current-loop and position-loop paths that must meet deterministic deadlines.
推荐
Machine Vision and Image Processing
The XC7A75T-1FGG484C supports machine-vision pipelines that must capture pixels, perform parallel processing, and transfer results with low latency. Its 180 DSP slices are suitable for filtering, correlation, and fixed-point transforms, while programmable logic can manage camera timing, line and frame counters, thresholds, and control interfaces. The 285 I/O provide parallel sensor connectivity for common image sensors and industrial cameras. By combining acquisition and processing in one FPGA, designers can reduce off-chip data transfers and improve deterministic response. Video timing and image-data bandwidth should be checked against the device resource budget before committing to a frame rate and resolution.
推荐
Programmable Logic Controller
The XC7A75T-1FGG484C is suitable for programmable logic controller and industrial control platforms requiring parallel I/O, deterministic logic, and flexible hardware configuration. The 75,520 logic cells can implement multiple scan tasks, communication protocols, motion sequencing, and diagnostic functions, while the 285 I/O support field-bus transceivers, discrete sensors, relays, and operator interfaces. Dedicated DSP resources can accelerate signal conditioning or power calculations without sacrificing basic control logic. The commercial-grade part should be selected only after confirming the enclosure temperature range, vibration profile, and long-term availability. For connected systems, the eight GTP transceivers may also simplify high-speed communication links.
推荐
Industrial Sensor Fusion
The XC7A75T-1FGG484C can combine measurements from multiple sensors in a single programmable data-acquisition system. Its 285 I/O accommodate digital sensors and parallel converters, while programmable logic handles sampling control, calibration, filtering, and timestamp coordination. The 180 DSP slices support real-time filtering, correlation, spectrum analysis, and custom weighting functions that would otherwise burden a microcontroller. Eight GTP transceivers provide a path to high-speed sensor or test equipment when the interface protocol requires it. Power, grounding, and clock distribution must be designed as one complete signal chain because converter noise or clock jitter can directly affect the achieved resolution and repeatability of the measurements.
推荐
High-Speed Communications Equipment
The XC7A75T-1FGG484C fits communications equipment requiring eight high-speed serial transceivers alongside programmable backhaul and control logic. The GTP blocks can support links to processors, network devices, converters, and test equipment, while 75,520 logic cells implement framing, lane alignment, CRC, error handling, and protocol adaptation. The 180 DSP slices can assist with channelization, filtering, or modulation-related arithmetic. A practical design should allocate transceiver pins and adjacent support components according to the Artix-7 layout guidance, because high-speed differential routing and supply isolation are as important as FPGA logic performance. The selected -1 speed grade must also satisfy the timing budget for the implemented serial interface.
推荐
Test and Measurement Instrumentation
The XC7A75T-1FGG484C is appropriate for modular test and measurement equipment requiring programmable acquisition, pattern generation, real-time analysis, and flexible control. The large parallel I/O count can connect to converters, memory, relay matrices, or fixture control lines, while the DSP slices accelerate FIR filters, waveform transforms, and numerical correction. Eight GTP transceivers can connect the FPGA to high-speed instruments or modules without requiring a separate link device. Because instrumentation accuracy depends on reference-clock quality and power-supply integrity, designers should isolate analog and digital sections, control impedance, and include self-calibration paths. Timing closure should be checked for sampling boundaries as well as the user-interface logic.
推荐
推荐产品汇总
工程参考数据: XC7A75T-1FGG484C ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XC7A75T-2FGG484C | XC7A75T-1FGG484I | XC7A75T-2FGG484I | XC7A75T-3FGG484C | XC7A75T-3FGG484E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FGG484 | FGG484 - same | FGG484 - same | FGG484 - same | FGG484 - same | FGG484 - same |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 75,520 cells | 75,520 cells | 75,520 cells | 75,520 cells | 75,520 cells | 75,520 cells |
| User I/O | 285 I/O | 285 I/O | 285 I/O | 285 I/O | 285 I/O | 285 I/O |
| DSP Slices | 180 slices | 180 slices | 180 slices | 180 slices | 180 slices | 180 slices |
| GTP Transceivers | 8 transceivers | 8 transceivers | 8 transceivers | 8 transceivers | 8 transceivers | 8 transceivers |
| Speed Grade | -1 | -2 | -1 | -2 | -3 | -3 |
| Temperature Grade | Commercial (C) | Commercial (C) | Industrial (I) | Industrial (I) | Commercial (C) | Extended (E) |
| Process Technology | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS |
关键差异点
- Balanced combination of programmable logic, DSP, and serial connectivity (对比 XC7A75T-2FGG484C)
- Commercial-temperature configuration with a direct higher-speed option (对比 XC7A75T-2FGG484C)
- Exact -1 speed option for systems requiring industrial temperature coverage (对比 XC7A75T-2FGG484I)
- Integrated signal-processing capacity reduces parallel device count (对比 XC7A75T-3FGG484E)
设计说明
Use the AMD Artix-7 FGG484 package pinout files as the authoritative starting point for every ball assignment. Preserve the exact power, ground, configuration, clock, and transceiver connections shown for XC7A75T; shared balls across smaller or faster grade options must not be assumed interchangeable without checking the device package file. The FGG484 footprint also requires escape routing that respects the manufacturer's ball geometry and PCB manufacturing capability.
Plan the power rails as a complete distribution network rather than isolated voltage connections. The core operates from a nominal 1 V supply, so rail routing, decoupling, return-current continuity, and plane or polygon connections must control impedance and noise. Place the required decoupling capacitors at the appropriate supply and ground balls, keep high-current paths short, and separate sensitive clock or analog input routing from switching and high-current nodes.
Perform thermal analysis with the actual FPGA utilization, core voltage, ambient temperature, board construction, and enclosure airflow. A 484-ball flip-chip BGA can move substantial heat through its solder balls and package into the PCB, but copper planes alone do not guarantee adequate junction-temperature margin. Use the package power and thermal model to determine whether spreading copper, additional layers, or board-level cooling is required.
Route GTP differential pairs as controlled-impedance, length-matched connections with symmetrical return paths, and follow the Artix-7 transceiver layout and reference-plane guidance. Keep configuration and clock paths away from switching nodes, and provide clean reference voltages where the design requires them. Because the FGG484 footprint is fine-pitch, verify drill-to-copper clearance, via-in-pad policy, solder mask design, and assembly capability with the selected PCB manufacturer before release.
Do not treat the -1, -2, or -3 suffix as a cosmetic ordering change. Timing closure can differ materially between speed grades even though the logic-cell, I/O, DSP, and transceiver counts remain similar. Likewise, C, I, and E temperature designations alter the permissible environmental envelope. Confirm both performance and environmental requirements, then rerun timing, power, and thermal sign-off using the exact selected ordering code.
合规信息
RoHS compliance is identified for the exact MPN. Other environmental, material, and automotive qualification attributes require confirmation from current AMD documentation or a supplier declaration.