XC7A75T-1FGG484C - 75,520-Cell Artix-7 FPGA | AMD Xilinx
MPN: XC7A75T-1FGG484C ✓ Hoạt độngXC7A75T-1FGG484C Tóm tắt
An FPGA is a configurable semiconductor whose logic, interconnect, memory, DSP, and I/O resources can be programmed after manufacture. The Artix-7 family occupies the FPGA hierarchy between lower-density programmable logic and larger FPGA and adaptive-computing products. It combines programmable digital logic, dedicated DSP blocks, block RAM, high-speed serial transceivers, and parallel I/O in one package for embedded control, signal processing, communications, and industrial automation systems.
The XC7A75T-1FGG484C provides 75,520 logic cells for parallel data paths and control logic, 285 user I/O for external interfaces, and 180 DSP slices for filtering, transforms, and other arithmetic-heavy operations. Its eight GTP transceivers support high-speed serial links, while the large flip-chip package provides extensive pin connectivity. These resources allow multiple subsystems to be consolidated without requiring several separate programmable devices.
The device uses 28 nm CMOS technology and is identified with a nominal 1 V core supply. Its architecture combines programmable logic and DSP resources with dedicated transceivers, allowing serial communication, control, and digital signal processing to operate within one device. The FGG484 package is a compact 484-ball organic flip-chip BGA, but its fine pitch and thermal requirements make careful PCB layout, power delivery, and heat dissipation essential.
Typical applications include industrial motor control, programmable logic controllers, machine vision, sensor processing, video image pipelines, communications infrastructure, and embedded test equipment. The 180 DSP slices are especially useful when a design repeatedly performs filtering, correlation, waveform generation, or other fixed-point operations. The eight GTP transceivers can reduce external serialization hardware when the board interface is based on high-speed serial links.
For a new design, confirm the exact package pinout, power-decoupling topology, configuration interface, clocking, and transceiver requirements in the AMD Artix-7 documentation before PCB release. The FGG484 package is not a leaded through-hole design, so BGA assembly capability, solder-ball inspection, adequate layer count, via geometry, and thermal analysis can materially affect manufacturing yield and long-term reliability.
This page combines the verified device identity, package and resource specifications, speed-grade alternatives, structured comparisons, and application-specific design guidance to support component selection and board planning for the XC7A75T-1FGG484C.
Bộ thay thế dễ dàng lắp đặt cho XC7A75T-1FGG484C — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC7A75T-1FGG484C (cùng hình factor và footprint) — khác nhau ở Package, Device Type, Process Technology, Logic Cells, Core Supply Voltage.
XC7A75T-2FGG484C
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XC7A75T-1FGG484I
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XC7A75T-2FGG484I
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XC7A75T-3FGG484C
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC7A75T-3FGG484E
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XC7A75T-1FGG484C Tỷ lệ tối đa & tính chất điện
| Device Type | Artix-7 Field Programmable Gate Array (FPGA) |
| Logic Cells | 75,520 cells |
| User I/O | 285 I/O |
| GTP Transceivers | 8 transceivers |
| DSP Slices | 180 slices |
| Process Technology | 28 nm CMOS |
| Core Supply Voltage | 1 V |
| Speed Grade | -1 |
| Temperature Grade | Commercial (C) |
| Hộp | 484-pin FGG484 flip-chip BGA |
| Package Type | 484-BBGA organic flip-chip BGA |
| Programmable Logic | Configurable FPGA logic and interconnect |
| Digital Signal Processing | 180 dedicated DSP slices |
| High-Speed Serial I/O | 8 GTP transceivers |
| Trạng thái RoHS | Compliant |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân XC7A75T-1FGG484C 484-bbga organic flip-chip bga
Cấu hình chân cho XC7A75T-1FGG484C (484-bbga organic flip-chip bga gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC7A75T-1FGG484C.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC7A75T-1FGG484C phù hợp cho 6 Áp dụngs: Industrial Motor Control, Machine Vision and Image Processing, Programmable Logic Controller, Industrial Sensor Fusion, High-Speed Communications Equipment, Test and Measurement Instrumentation.
Industrial Motor Control
The XC7A75T-1FGG484C fits industrial motor-control systems that combine deterministic sequencing, sensor acquisition, communications, and protection logic. Its 75,520 logic cells can host control algorithms and state machines, while 285 I/O provide connectivity for encoders, gate drivers, interlocks, and external converters. The 180 DSP slices can accelerate filtering or arithmetic operations without occupying general-purpose logic. Placing these functions in one FPGA reduces component count and improves synchronization. The primary design check is timing closure at the selected -1 speed grade, particularly for current-loop and position-loop paths that must meet deterministic deadlines.
Được đề xuất
Machine Vision and Image Processing
The XC7A75T-1FGG484C supports machine-vision pipelines that must capture pixels, perform parallel processing, and transfer results with low latency. Its 180 DSP slices are suitable for filtering, correlation, and fixed-point transforms, while programmable logic can manage camera timing, line and frame counters, thresholds, and control interfaces. The 285 I/O provide parallel sensor connectivity for common image sensors and industrial cameras. By combining acquisition and processing in one FPGA, designers can reduce off-chip data transfers and improve deterministic response. Video timing and image-data bandwidth should be checked against the device resource budget before committing to a frame rate and resolution.
Được đề xuất
Programmable Logic Controller
The XC7A75T-1FGG484C is suitable for programmable logic controller and industrial control platforms requiring parallel I/O, deterministic logic, and flexible hardware configuration. The 75,520 logic cells can implement multiple scan tasks, communication protocols, motion sequencing, and diagnostic functions, while the 285 I/O support field-bus transceivers, discrete sensors, relays, and operator interfaces. Dedicated DSP resources can accelerate signal conditioning or power calculations without sacrificing basic control logic. The commercial-grade part should be selected only after confirming the enclosure temperature range, vibration profile, and long-term availability. For connected systems, the eight GTP transceivers may also simplify high-speed communication links.
Được đề xuất
Industrial Sensor Fusion
The XC7A75T-1FGG484C can combine measurements from multiple sensors in a single programmable data-acquisition system. Its 285 I/O accommodate digital sensors and parallel converters, while programmable logic handles sampling control, calibration, filtering, and timestamp coordination. The 180 DSP slices support real-time filtering, correlation, spectrum analysis, and custom weighting functions that would otherwise burden a microcontroller. Eight GTP transceivers provide a path to high-speed sensor or test equipment when the interface protocol requires it. Power, grounding, and clock distribution must be designed as one complete signal chain because converter noise or clock jitter can directly affect the achieved resolution and repeatability of the measurements.
Được đề xuất
High-Speed Communications Equipment
The XC7A75T-1FGG484C fits communications equipment requiring eight high-speed serial transceivers alongside programmable backhaul and control logic. The GTP blocks can support links to processors, network devices, converters, and test equipment, while 75,520 logic cells implement framing, lane alignment, CRC, error handling, and protocol adaptation. The 180 DSP slices can assist with channelization, filtering, or modulation-related arithmetic. A practical design should allocate transceiver pins and adjacent support components according to the Artix-7 layout guidance, because high-speed differential routing and supply isolation are as important as FPGA logic performance. The selected -1 speed grade must also satisfy the timing budget for the implemented serial interface.
Được đề xuất
Test and Measurement Instrumentation
The XC7A75T-1FGG484C is appropriate for modular test and measurement equipment requiring programmable acquisition, pattern generation, real-time analysis, and flexible control. The large parallel I/O count can connect to converters, memory, relay matrices, or fixture control lines, while the DSP slices accelerate FIR filters, waveform transforms, and numerical correction. Eight GTP transceivers can connect the FPGA to high-speed instruments or modules without requiring a separate link device. Because instrumentation accuracy depends on reference-clock quality and power-supply integrity, designers should isolate analog and digital sections, control impedance, and include self-calibration paths. Timing closure should be checked for sampling boundaries as well as the user-interface logic.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC7A75T-1FGG484C — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC7A75T-2FGG484C | XC7A75T-1FGG484I | XC7A75T-2FGG484I | XC7A75T-3FGG484C | XC7A75T-3FGG484E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FGG484 | FGG484 - same | FGG484 - same | FGG484 - same | FGG484 - same | FGG484 - same |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 75,520 cells | 75,520 cells | 75,520 cells | 75,520 cells | 75,520 cells | 75,520 cells |
| User I/O | 285 I/O | 285 I/O | 285 I/O | 285 I/O | 285 I/O | 285 I/O |
| DSP Slices | 180 slices | 180 slices | 180 slices | 180 slices | 180 slices | 180 slices |
| GTP Transceivers | 8 transceivers | 8 transceivers | 8 transceivers | 8 transceivers | 8 transceivers | 8 transceivers |
| Speed Grade | -1 | -2 | -1 | -2 | -3 | -3 |
| Temperature Grade | Commercial (C) | Commercial (C) | Industrial (I) | Industrial (I) | Commercial (C) | Extended (E) |
| Process Technology | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS |
Bảo phân biệt quan trọng
- Balanced combination of programmable logic, DSP, and serial connectivity (vsXC7A75T-2FGG484C)
- Commercial-temperature configuration with a direct higher-speed option (vsXC7A75T-2FGG484C)
- Exact -1 speed option for systems requiring industrial temperature coverage (vsXC7A75T-2FGG484I)
- Integrated signal-processing capacity reduces parallel device count (vsXC7A75T-3FGG484E)
Ghi chú thiết kế
Use the AMD Artix-7 FGG484 package pinout files as the authoritative starting point for every ball assignment. Preserve the exact power, ground, configuration, clock, and transceiver connections shown for XC7A75T; shared balls across smaller or faster grade options must not be assumed interchangeable without checking the device package file. The FGG484 footprint also requires escape routing that respects the manufacturer's ball geometry and PCB manufacturing capability.
Plan the power rails as a complete distribution network rather than isolated voltage connections. The core operates from a nominal 1 V supply, so rail routing, decoupling, return-current continuity, and plane or polygon connections must control impedance and noise. Place the required decoupling capacitors at the appropriate supply and ground balls, keep high-current paths short, and separate sensitive clock or analog input routing from switching and high-current nodes.
Perform thermal analysis with the actual FPGA utilization, core voltage, ambient temperature, board construction, and enclosure airflow. A 484-ball flip-chip BGA can move substantial heat through its solder balls and package into the PCB, but copper planes alone do not guarantee adequate junction-temperature margin. Use the package power and thermal model to determine whether spreading copper, additional layers, or board-level cooling is required.
Route GTP differential pairs as controlled-impedance, length-matched connections with symmetrical return paths, and follow the Artix-7 transceiver layout and reference-plane guidance. Keep configuration and clock paths away from switching nodes, and provide clean reference voltages where the design requires them. Because the FGG484 footprint is fine-pitch, verify drill-to-copper clearance, via-in-pad policy, solder mask design, and assembly capability with the selected PCB manufacturer before release.
Do not treat the -1, -2, or -3 suffix as a cosmetic ordering change. Timing closure can differ materially between speed grades even though the logic-cell, I/O, DSP, and transceiver counts remain similar. Likewise, C, I, and E temperature designations alter the permissible environmental envelope. Confirm both performance and environmental requirements, then rerun timing, power, and thermal sign-off using the exact selected ordering code.
Thông tin tuân thủ
RoHS compliance is identified for the exact MPN. Other environmental, material, and automotive qualification attributes require confirmation from current AMD documentation or a supplier declaration.