AMD

XC7K410T-1FFG900C - 406,720-Cell Kintex-7 FPGA | AMD

MPN: XC7K410T-1FFG900C ✓ Aktif
970 mV to 1.03 V Vdss FFG900 FCBGA, 900 balls Package 400 MHz Speed
MOQ: 1 |

XC7K410T-1FFG900C Ringkasan

The AMD Xilinx XC7K410T-1FFG900C is a Kintex-7 field-programmable gate array built on 28 nm technology, with 406,720 logic cells, approximately 500 user I/Os, 16 GTX serial transceiver lanes, and 28,620 Kb of block RAM in an FFG900 FCBGA package. The -1 speed grade and C suffix identify this specific commercial-temperature configuration, while the FFG900 package provides a large, high-pin-count interface for complex FPGA platforms.

A field-programmable gate array is a programmable logic device that combines configurable logic blocks, programmable interconnects, memory resources, digital signal processing resources, and dedicated I/O into one semiconductor. In the FPGA hierarchy, this device belongs to the Kintex-7 family of programmable logic devices and sits above basic programmable logic arrays while below more specialized adaptive-computing devices. Its combination of high logic density, DSP capacity, block RAM, and high-speed serial I/O supports parallel processing, protocol bridging, signal processing, and high-bandwidth data movement.

The XC7K410T-1FFG900C provides 406,720 logic cells and a listed operating frequency of 400 MHz. Its 16 GTX lanes support high-speed serial connectivity, while the 500-I/O configuration enables extensive parallel interfaces. The 28,620 Kb block RAM capacity allows data buffering, packet storage, and deeper on-chip pipelines without relying on external memory for every access. AMD describes Kintex-7 devices as providing price/performance and power advantages at 28 nm while supporting mainstream connectivity such as PCIe Gen3 and 10 Gigabit Ethernet.

The -1 designation identifies the performance grade within the Kintex-7 family. Timing closure should be evaluated with the AMD Vivado design tools, the Kintex-7 data sheet, and the applicable device-specific constraints. The FFG900 package has a substantial ball count and requires careful PCB escape routing, multilayer construction, controlled power delivery, and thermal design. Package files and pin definitions should be checked against the current AMD Kintex-7 package pinout resources before schematic capture or PCB layout.

Typical uses include PCIe endpoint and carrier designs, 10 Gigabit Ethernet data paths, industrial video processing, high-throughput digital filtering, network interface equipment, test and measurement systems, and high-speed protocol bridges. The 16 GTX lanes are especially relevant when a design must combine substantial parallel logic with serial links. The 500 user I/Os also suit designs that retain substantial parallel control, status, and data interfaces around the serial subsystem.

For new PCB layouts, use the AMD FFG900 package pinout files and assign every power, ground, configuration, clock, and transceiver connection exactly as specified. Validate signal integrity, return paths, via construction, and layer transitions with the relevant AMD implementation guidance. A thermal solution appropriate to the board airflow and the device's actual utilization is essential because static and dynamic power depend strongly on logic activity, I/O loading, and transceiver state.

This page organizes the device's principal architecture, sourcing, drop-in alternatives, comparison points, and engineering guidance in one design-focused reference. It also identifies package and electrical details that require direct confirmation against the AMD Kintex-7 data sheet and UG475 package documentation before a production layout is released.

Pilihan pengganti yang segera untuk XC7K410T-1FFG900C — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera XC7K410T-1FFG900C (sama faktor bentuk dan kaki) — berbeza dalam Package, Process Technology, Block RAM, Logic Cells, Speed Grade.

AMD
Package: 900-BBGA, FCBGA
Process Technology: 28nm
Block RAM: 29306880 bits
Bandingkan Dengan XC7K410T-1FFG900C →
AMD
Package: 900-FCBGA (31x31 mm)
Process Technology: 28nm HKMG
Block RAM: 29306880 bits
Bandingkan Dengan XC7K410T-1FFG900C →
AMD
Package: 900-BBGA, FCBGA
Block RAM: 29306880 bits
Logic Cells: 406720
Bandingkan Dengan XC7K410T-1FFG900C →
AMD
Package: 900-BBGA, FCBGA (FFG900)
Process Technology: 28nm HPL HKMG
Block RAM: 29,306,880 bits
Bandingkan Dengan XC7K410T-1FFG900C →

XC7K410T-1FFG900I

✅ Masuk Drop-In
AMD
📦 FFG900 FCBGA, 900 balls
Kintex-7 · 406720 · 29306880 bits · 1540 · 500 · LVCMOS, LVDS, HSTL, SSTL (up to 1.8V) · 16 (up to 12.5 Gb/s) · 1.0 V

Hubungi untuk harga

Lihat Datasheet →

XC7K410T-2FFG900C

✅ Masuk Drop-In
AMD
📦 FFG900 FCBGA, 900 balls
Kintex-7 · 406720 · 29306880 bits · 1540 · 500 · 31775 · 1286 MHz · 28nm

Hubungi untuk harga

Lihat Datasheet →

XC7K410T-2FFG900I

✅ Masuk Drop-In
AMD
📦 FFG900 FCBGA, 900 balls
406,720 · 29,306,880 bits · 1,540 · 500 · 900-BBGA, FCBGA (FFG900) · -2 · -40°C to +100°C (industrial) · 28nm HPL HKMG

Hubungi untuk harga

Lihat Datasheet →

XC7K410T-3FFG900C

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 FFG900 FCBGA, 900 balls
Same FFG900 package and C temperature code; -3 speed grade replaces -1 and provides higher timing performance with different power behavior

📋 Alternatif rujukan (tidak dalam katalog)

XC7K410T-1FFG900ES

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 FFG900 FCBGA, 900 balls
Same -1 speed grade and FFG900 package; extended-temperature suffix replaces C and changes environmental coverage

📋 Alternatif rujukan (tidak dalam katalog)

XC7K410T-1FFG900C Penilaian maksimum & Ciri-ciri Elektrik

Device Type Kintex-7 field-programmable gate array
Logic Cells 406,720 cells
Process Technology 28 nm
Block RAM 28,620 Kb
Maximum User I/O 500 I/Os
GTX Serial Transceiver Lanes 16 lanes
Listed Operating Frequency 400 MHz
Core Voltage 970 mV to 1.03 V
Kemasan FFG900 FCBGA, 900 balls
Speed Grade -1
Temperature Grade Code C
Supported High-Speed Protocol PCIe Gen3
Supported Network Protocol 10 Gigabit Ethernet

Panduan Konfigurasi Pin XC7K410T-1FFG900C ffg900 fcbga, 900 balls

Konfigurasi pin untuk XC7K410T-1FFG900C (ffg900 fcbga, 900 balls pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai ffg900 fcbga, 900 balls untuk XC7K410T-1FFG900C

Tiada data garisan pin yang diperoleh untuk XC7K410T-1FFG900C.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

XC7K410T-1FFG900C patut untuk 6 aplikasis: PCIe Gen3 Endpoint and Carrier Designs, 10 Gigabit Ethernet Network Equipment, Industrial Video and Image Processing, Digital Signal Processing and Filtering, Test and Measurement Instrumentation, High-Speed Protocol Bridge and Interface Consolidation.

🖥️

PCIe Gen3 Endpoint and Carrier Designs

The XC7K410T-1FFG900C fits PCIe Gen3 endpoint, bridge, and carrier-board designs because it combines 16 GTX serial lanes with 406,720 logic cells and 28,620 Kb of block RAM. Designers can allocate parallel datapaths for packet buffering, descriptor handling, DMA control, and protocol logic while retaining high-speed serial connectivity through dedicated GTX resources. Its 500 user I/Os provide additional lanes for control, status, clocks, and board-level functions. The -1 grade is appropriate when the design meets its timing target without requiring the highest Kintex-7 speed grade. Final implementation still depends on the selected PCIe IP, reference clock, transceiver configuration, device constraints, and the FFG900 power and thermal environment.

🌐

10 Gigabit Ethernet Network Equipment

The XC7K410T-1FFG900C is suitable for 10 Gigabit Ethernet line cards, packet-processing systems, and network test equipment because its 16 GTX lanes support multiple high-speed serial links while its large logic capacity accommodates framing, classification, queueing, and traffic management. The 28,620 Kb of block RAM can absorb packet bursts and support flow-control buffers without making every transaction depend on external memory. With up to 500 user I/Os, the device can also supervise parallel PHY, management, and backplane interfaces. Designers should use AMD transceiver and interface implementation guidance to establish eye masks, reference-clock architecture, equalization, and channel-loss targets for the deployed board environment.

📺

Industrial Video and Image Processing

The XC7K410T-1FFG900C supports industrial video, machine-vision, and high-throughput image-processing systems that combine parallel sensor interfaces with serialized data movement. Its 500 user I/Os can serve camera-control signals, synchronization, configuration, and parallel pixel data, while the 16 GTX lanes can move compressed or processed video through a high-speed fabric. The 406,720 logic cells and 28,620 Kb of block RAM allow substantial line buffers, feature extraction, and control pipelines to remain on-chip. Practical designs should constrain clock domains carefully, validate video timing through the target interface, and account for the thermal contribution of simultaneous logic, I/O, and GTX activity in the FFG900 package.

📡

Digital Signal Processing and Filtering

The XC7K410T-1FFG900C is appropriate for parallel digital signal processing, filtering, modulation, and spectral-analysis systems because its 406,720 logic cells provide substantial implementation capacity and its DSP resources can accelerate multiply-accumulate-heavy pipelines. The block RAM capacity of 28,620 Kb supports coefficient storage, sample histories, and ping-pong buffers, reducing pressure on external memory for tightly coupled operations. The 500 user I/Os make it practical to combine parallel ADC or DAC data paths with serial communication and configuration channels. Achieved sample rate depends on the -1 speed grade, selected I/O standards, clocking, device utilization, and timing closure, so engineers should use AMD Vivado implementation reports to confirm timing rather than infer performance from raw logic-cell count.

🔧

Test and Measurement Instrumentation

The XC7K410T-1FFG900C fits modular test and measurement instruments that require deterministic acquisition, pattern generation, protocol analysis, and high-speed data export. Its 500 user I/Os support parallel DUT stimulus and response channels, while 16 GTX lanes can connect to high-speed instruments or multiple serial test ports. The large logic capacity permits timing, protocol, and analysis engines to coexist, and the 28,620 Kb of block RAM can capture short acquisition bursts. For laboratory equipment, engineers should isolate analog sections appropriately, provide clean reference clocks, maintain deterministic reset and trigger behavior, and verify output timing with worst-case loading and the selected -1 grade constraints.

🔌

High-Speed Protocol Bridge and Interface Consolidation

The XC7K410T-1FFG900C can consolidate several legacy parallel interfaces and newer high-speed serial links into one programmable device. Its 500 user I/Os are useful for acquiring legacy bus traffic, while the 16 GTX lanes can carry multiple modern serial protocols. A bridge design can use the 406,720 logic cells for encoding, buffering, arbitration, and fault handling, with 28,620 Kb of block RAM supporting temporary queues between wide parallel domains and narrow serial domains. The device is particularly useful when protocol revisions require field-updatable logic rather than a fixed bridge ASIC. Production designs must include CDC analysis, protocol-specific clock-domain constraints, transceiver calibration strategy, recovery behavior, and complete conformance testing before board release.

What are the key specifications of XC7K410T-1FFG900C that engineers should know?
The XC7K410T-1FFG900C is a 28 nm Kintex-7 FPGA with 406,720 logic cells, 28,620 Kb of block RAM, up to 500 user I/Os, 16 GTX lanes, and an FFG900 FCBGA package. According to the AMD Kintex-7 data sheet DS182, the device also includes DSP resources and supports mainstream high-speed connectivity such as PCIe Gen3 and 10 Gigabit Ethernet. The -1 suffix identifies its speed grade, while C identifies the temperature-grade family.
Where can I download the XC7K410T-1FFG900C datasheet PDF?
The XC7K410T-1FFG900C datasheet PDF is available through the AMD Kintex-7 documentation resources, with a copy identified as DS182, version 2.16, dated May 8, 2017. Use that document for device architecture, DC and AC switching characteristics, package information, and speed-grade data. For exact FFG900 ball assignments, also use AMD's Kintex-7 package device pinout files, which provide package data in TXT and CSV formats under the package-file format described in UG475.
Where can I find the XC7K410T-1FFG900C pinout and FFG900 package data?
The XC7K410T-1FFG900C pinout is identified through the AMD Kintex-7 package device pinout files, which include ASCII package information in TXT and CSV formats. Use the FFG900 package file rather than relying on another 900-ball package because mechanically similar packages can differ in ball definitions or thermal construction. The package-file format is described in UG475. Always verify the released board file against the exact FPGA MPN before fabrication.
What can replace XC7K410T-1FFG900C?
The closest same-package replacements are other XC7K410T devices in the FFG900 configuration, including XC7K410T-1FFG900I, XC7K410T-2FFG900C, and XC7K410T-2FFG900I. They retain the 406,720-cell Kintex-7 device and FFG900 footprint, but speed grade or temperature coverage may differ. A replacement should be selected only after checking timing constraints, I/O limits, power behavior, and temperature requirements. No verified cross-brand drop-in alternative was identified.
Is XC7K410T-1FFG900I a drop-in replacement for XC7K410T-1FFG900C?
XC7K410T-1FFG900I is a pin-compatible FFG900 alternative for the XC7K410T-1FFG900C because it retains the same device family and package configuration while using the I temperature-grade code. According to AMD comparison information, the devices are mostly compatible, but their timing files differ because the temperature ranges differ. Verify the exact I/C grade boundaries, power characteristics, and design constraints before treating the substitution as production-ready.
What is the difference between XC7K410T-1FFG900C and XC7K410T-2FFG900C?
Both devices use the Kintex-7 XC7K410T implementation and FFG900 package, but the -2 device represents a faster performance grade than the -1 target. The AMD Kintex-7 family documentation lists -1 and -2 among its available speed grades, with -3 providing the highest listed performance. The -2 option can improve timing margin in a qualifying design, but its power characteristics may differ and it should not be treated as a drop-in change without timing closure and thermal review.
When should I choose XC7K410T-1FFG900C over a faster -2 or -3 grade?
Choose the XC7K410T-1FFG900C when its -1 timing performance satisfies the design and lower complexity or power behavior is more important than maximum speed. This is particularly relevant where the FFG900 package is already fixed and the design does not need the timing margin offered by a higher speed grade. Choose a -2 or -3 option only when timing analysis shows a clear performance requirement and the associated power, thermal, and validation effects are acceptable.
Is XC7K410T-1FFG900C suitable for PCIe and 10 Gigabit Ethernet designs?
The XC7K410T-1FFG900C is suitable for PCIe Gen3 and 10 Gigabit Ethernet applications because it combines 16 GTX lanes with substantial logic, DSP, block RAM, and user I/O resources. AMD identifies PCIe Gen3 and 10 Gigabit Ethernet as mainstream Kintex-7 connectivity use cases. The final design still requires protocol-specific IP, reference clocking, power sequencing, signal-integrity validation, and confirmation that the selected speed grade meets the interface timing target.
How many GTX transceivers and user I/Os does XC7K410T-1FFG900C have?
The XC7K410T-1FFG900C configuration provides 16 GTX serial transceiver lanes and up to 500 ordinary user I/Os. The listed I/O total depends on the actual speed grade and package configuration, so engineers should use the device and package tables in DS182 rather than treating all 900 package balls as user I/Os. Reserve the remaining balls for power, ground, configuration, clocks, and other dedicated functions.
How much power does XC7K410T-1FFG900C dissipate?
The XC7K410T-1FFG900C power dissipation depends on core voltage, I/O loading, transceiver activity, clocking, resource utilization, and the -1 grade's operating conditions. AMD's DS182 contains static and dynamic power guidance, while DS181 provides detailed power-consumption methodology for 7-series devices. Do not assign a single wattage without defining the utilization and operating state. Use the vendor power estimator and measure or simulate the final design under its worst-case activity.
Where can I buy XC7K410T-1FFG900C and what is its lead time?
Use the Request a Quote form on this page to request XC7K410T-1FFG900C availability, current commercial terms, and lead time. The exact lead time can vary with the requested quantity, supply position, and approved sourcing channel, so it should be confirmed for the specific order rather than copied from a generic listing. Include the full MPN, FFG900 package, -1 speed grade, and C temperature code on the request.
What is the current price of XC7K410T-1FFG900C?
The current commercial price for XC7K410T-1FFG900C should be obtained through the Request a Quote form on this page. Price and lead time can vary with quantity, supply status, and sourcing terms, while a large FPGA in the FFG900 package is not comparable to a generic low-pin-count programmable logic price. Specify the required quantity and whether reels, trays, or other approved packing are needed so the quote reflects the correct orderable configuration.
Is XC7K410T-1FFG900C in stock?
Current XC7K410T-1FFG900C inventory should be confirmed through the Request a Quote form on this page. A distributor listing indicating that the part can be ordered does not establish a guaranteed stock quantity for every order configuration. Provide the desired quantity and delivery location with the request. For production planning, treat the confirmed allocation date as the controlling lead-time commitment rather than relying on a generic availability statement.
What is the best AMD equivalent for XC7K410T-1FFG900C?
The best AMD/Xilinx alternatives are the XC7K410T-1FFG900I, XC7K410T-2FFG900C, and XC7K410T-2FFG900I because they retain the same FFG900 package and 406,720-cell Kintex-7 basis. The closest functional match is XC7K410T-1FFG900I, subject to temperature-grade and timing-file differences. AMD also notes that an FBG900 variant differs from FFG900 primarily by the absence of a lid and heat spreader, so it should not be assumed to be an exact drop-in replacement.
Does the XC7K410T-1FFG900C use RoHS-compliant materials?
The RoHS status of the XC7K410T-1FFG900C should be confirmed from the current AMD product and material-compliance documentation for the exact orderable MPN. The supplied product information does not provide an explicit RoHS declaration for this suffix, so no unsupported compliance claim is appropriate here. Likewise, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer's current compliance records before a regulated production release.

Data referensi kejuruteraan untuk XC7K410T-1FFG900C — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the XC7K410T-1FFG900C when the Kintex-7 architecture, FFG900 footprint, 406,720 logic cells, 16 GTX lanes, and -1 performance grade meet the design requirements. Select XC7K410T-1FFG900I when the same speed grade is needed under an I temperature qualification, but verify the applicable environmental range and timing files. Choose XC7K410T-2FFG900C or XC7K410T-2FFG900I when the extra performance margin of the -2 grade is useful and its power and thermal effects have been evaluated. XC7K410T-3FFG900C offers the highest listed speed tier but should be selected only when the performance benefit justifies additional validation. None of these substitutions changes the fundamental need to confirm package files, power sequencing, transceiver implementation, timing closure, and board-level signal integrity. No cross-brand drop-in alternative was verified, so an equivalent from another FPGA manufacturer would require a new footprint and design qualification rather than a simple replacement.

Perbandingan dengan Gantian

Parametr Produk Ini XC7K410T-1FFG900I XC7K410T-2FFG900C XC7K410T-2FFG900I XC7K410T-3FFG900C XC7K410T-1FFG900ES
Brand AMD AMD AMD AMD AMD AMD
Package FFG900 FCBGA, 900 balls FFG900 FCBGA, 900 balls FFG900 FCBGA, 900 balls FFG900 FCBGA, 900 balls FFG900 FCBGA, 900 balls FFG900 FCBGA, 900 balls
Logic Cells 406,720 cells 406,720 cells 406,720 cells 406,720 cells 406,720 cells 406,720 cells
Block RAM 28,620 Kb 28,620 Kb 28,620 Kb 28,620 Kb 28,620 Kb 28,620 Kb
Process Technology 28 nm 28 nm 28 nm 28 nm 28 nm 28 nm
Speed Grade -1 -1 -2 -2 -3 -1
Temperature Code C I C I C ES
GTX Serial Transceiver Lanes 16 lanes 16 lanes 16 lanes 16 lanes 16 lanes 16 lanes
Maximum User I/O 500 I/Os 500 I/Os 500 I/Os 500 I/Os 500 I/Os 500 I/Os
Special Feature -1 commercial-temperature speed grade -1 industrial temperature grade -2 commercial-temperature speed grade -2 industrial-temperature speed grade -3 commercial-temperature speed grade -1 extended-temperature grade

Penyeberangsung Jelas

  • Exact -1 speed-grade substitution with broader temperature coverage (vsXC7K410T-1FFG900I)
  • Higher performance grade without changing the package (vsXC7K410T-2FFG900C)
  • Combined speed and temperature-grade option (vsXC7K410T-2FFG900I)
  • Highest listed Kintex-7 performance option in the same footprint (vsXC7K410T-3FFG900C)

Catatan Desain

Use the AMD FFG900 package pinout files and UG475 package-file format before assigning schematic and PCB nets. A 900-ball FCBGA requires deliberate escape routing, power-plane segmentation, and via-in-pad or microvia strategies, depending on the board density and manufacturing process. Separate supplies for core, I/O, and transceiver rails as required by the selected design. Do not reuse a generic 900-ball symbol: the distinction between FFG900 and FBG900 includes package-lid and heat-spreader differences even though the underlying ballout is closely related.

Design the FFG900 thermal path around the highest credible combination of core, I/O, memory, and GTX activity. AMD's power tools and 7-series power guidance should be used with the actual clock rates, utilization, I/O standards, and transceiver states. Cooling performance depends on board area, copper layers, airflow, and the package heat-spreader arrangement. Verify temperature margins at the device, nearby inductors, and power regulators rather than assuming that a nominal airflow value applies to every installed system.

Apply the AMD high-speed serial design methodology to all GTX connections, including reference-clock routing, lane polarity, transmitter configuration, receiver termination, and connector or package escape paths. Validate channel loss, reflection, crosstalk, and jitter against the selected data rate and protocol mask. Keep parallel and high-speed routing separated where practical, use continuous reference planes, and schedule length matching in the PCB tool. Simulation results should be compared with the final stack-up, material properties, and completed board geometry.

Do not treat a same-package FPGA substitution as automatically timing-compatible. The AMD compatibility information notes that XC7K410T-1FFG900C and XQ7K410T-1RF900M are mostly compatible but use different timing files because their temperature ranges differ; a bitstream for one direction may not be valid in the other. For any -1, -2, -3, C, I, or ES change, regenerate constraints, rerun implementation and timing analysis, review power estimates, and confirm the exact ordering code before approving the substitution.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The exact compliance records for XC7K410T-1FFG900C were not stated. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status with AMD for the complete orderable MPN before production release.

Pencarian Berhubungan

xc7k410t 1ffg900c xc7k410t 2ffg900i xc7k410t 2ffg676i xc7k410t 2fbg676i xc7k410t 1ffg900i xc7k410t datasheet xc7k410t 2fbg900i xc7k410t fpga xc7k410t ffg900 XC7K410T-1FFG900C datasheet pdf XC7K410T-1FFG900C pinout XC7K410T-1FFG900C equivalent XC7K410T-1FFG900C replacement AMD XC7K410T-1FFG900C price

Komponen dan Tanda berkaitan

AMD AMD Xilinx XC7K410T XC7K410T-1FFG900C XC7K410T-1FFG900I XC7K410T-2FFG900C XC7K410T-2FFG900I Kintex-7 field-programmable gate array FPGA programmable logic device semiconductor 406,720 logic cells 28,620 Kb block RAM 16 GTX lanes FFG900 FCBGA 900-ball package 28 nm process technology PCIe Gen3 10 Gigabit Ethernet DSP resource AMD Vivado UG475 DS182
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ