XC7K410T-1FFG900C - 406,720-Cell Kintex-7 FPGA | AMD
MPN: XC7K410T-1FFG900C ✓ فعالXC7K410T-1FFG900C نمای کلی
A field-programmable gate array is a programmable logic device that combines configurable logic blocks, programmable interconnects, memory resources, digital signal processing resources, and dedicated I/O into one semiconductor. In the FPGA hierarchy, this device belongs to the Kintex-7 family of programmable logic devices and sits above basic programmable logic arrays while below more specialized adaptive-computing devices. Its combination of high logic density, DSP capacity, block RAM, and high-speed serial I/O supports parallel processing, protocol bridging, signal processing, and high-bandwidth data movement.
The XC7K410T-1FFG900C provides 406,720 logic cells and a listed operating frequency of 400 MHz. Its 16 GTX lanes support high-speed serial connectivity, while the 500-I/O configuration enables extensive parallel interfaces. The 28,620 Kb block RAM capacity allows data buffering, packet storage, and deeper on-chip pipelines without relying on external memory for every access. AMD describes Kintex-7 devices as providing price/performance and power advantages at 28 nm while supporting mainstream connectivity such as PCIe Gen3 and 10 Gigabit Ethernet.
The -1 designation identifies the performance grade within the Kintex-7 family. Timing closure should be evaluated with the AMD Vivado design tools, the Kintex-7 data sheet, and the applicable device-specific constraints. The FFG900 package has a substantial ball count and requires careful PCB escape routing, multilayer construction, controlled power delivery, and thermal design. Package files and pin definitions should be checked against the current AMD Kintex-7 package pinout resources before schematic capture or PCB layout.
Typical uses include PCIe endpoint and carrier designs, 10 Gigabit Ethernet data paths, industrial video processing, high-throughput digital filtering, network interface equipment, test and measurement systems, and high-speed protocol bridges. The 16 GTX lanes are especially relevant when a design must combine substantial parallel logic with serial links. The 500 user I/Os also suit designs that retain substantial parallel control, status, and data interfaces around the serial subsystem.
For new PCB layouts, use the AMD FFG900 package pinout files and assign every power, ground, configuration, clock, and transceiver connection exactly as specified. Validate signal integrity, return paths, via construction, and layer transitions with the relevant AMD implementation guidance. A thermal solution appropriate to the board airflow and the device's actual utilization is essential because static and dynamic power depend strongly on logic activity, I/O loading, and transceiver state.
This page organizes the device's principal architecture, sourcing, drop-in alternatives, comparison points, and engineering guidance in one design-focused reference. It also identifies package and electrical details that require direct confirmation against the AMD Kintex-7 data sheet and UG475 package documentation before a production layout is released.
جایگزینهای drop-in برای XC7K410T-1FFG900C — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای XC7K410T-1FFG900C (همان فرمفاکتور و فوتپرینت) — متفاوت در Package, Process Technology, Block RAM, Logic Cells, Speed Grade.
XC7K410T-1FFG900I
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XC7K410T-2FFG900C
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XC7K410T-2FFG900I
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XC7K410T-3FFG900C
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
XC7K410T-1FFG900ES
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
XC7K410T-1FFG900C حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | Kintex-7 field-programmable gate array |
| Logic Cells | 406,720 cells |
| Process Technology | 28 nm |
| Block RAM | 28,620 Kb |
| Maximum User I/O | 500 I/Os |
| GTX Serial Transceiver Lanes | 16 lanes |
| Listed Operating Frequency | 400 MHz |
| Core Voltage | 970 mV to 1.03 V |
| بستهبندی | FFG900 FCBGA, 900 balls |
| Speed Grade | -1 |
| Temperature Grade Code | C |
| Supported High-Speed Protocol | PCIe Gen3 |
| Supported Network Protocol | 10 Gigabit Ethernet |
راهنمای پیکربندی پین XC7K410T-1FFG900C ffg900 fcbga, 900 balls
پیکربندی پین برای XC7K410T-1FFG900C (پکیج ffg900 fcbga, 900 balls). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای XC7K410T-1FFG900C.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
XC7K410T-1FFG900C مناسب است برای 6 کاربردs: PCIe Gen3 Endpoint and Carrier Designs, 10 Gigabit Ethernet Network Equipment, Industrial Video and Image Processing, Digital Signal Processing and Filtering, Test and Measurement Instrumentation, High-Speed Protocol Bridge and Interface Consolidation.
PCIe Gen3 Endpoint and Carrier Designs
The XC7K410T-1FFG900C fits PCIe Gen3 endpoint, bridge, and carrier-board designs because it combines 16 GTX serial lanes with 406,720 logic cells and 28,620 Kb of block RAM. Designers can allocate parallel datapaths for packet buffering, descriptor handling, DMA control, and protocol logic while retaining high-speed serial connectivity through dedicated GTX resources. Its 500 user I/Os provide additional lanes for control, status, clocks, and board-level functions. The -1 grade is appropriate when the design meets its timing target without requiring the highest Kintex-7 speed grade. Final implementation still depends on the selected PCIe IP, reference clock, transceiver configuration, device constraints, and the FFG900 power and thermal environment.
پیشنهادی
10 Gigabit Ethernet Network Equipment
The XC7K410T-1FFG900C is suitable for 10 Gigabit Ethernet line cards, packet-processing systems, and network test equipment because its 16 GTX lanes support multiple high-speed serial links while its large logic capacity accommodates framing, classification, queueing, and traffic management. The 28,620 Kb of block RAM can absorb packet bursts and support flow-control buffers without making every transaction depend on external memory. With up to 500 user I/Os, the device can also supervise parallel PHY, management, and backplane interfaces. Designers should use AMD transceiver and interface implementation guidance to establish eye masks, reference-clock architecture, equalization, and channel-loss targets for the deployed board environment.
پیشنهادی
Industrial Video and Image Processing
The XC7K410T-1FFG900C supports industrial video, machine-vision, and high-throughput image-processing systems that combine parallel sensor interfaces with serialized data movement. Its 500 user I/Os can serve camera-control signals, synchronization, configuration, and parallel pixel data, while the 16 GTX lanes can move compressed or processed video through a high-speed fabric. The 406,720 logic cells and 28,620 Kb of block RAM allow substantial line buffers, feature extraction, and control pipelines to remain on-chip. Practical designs should constrain clock domains carefully, validate video timing through the target interface, and account for the thermal contribution of simultaneous logic, I/O, and GTX activity in the FFG900 package.
پیشنهادی
Digital Signal Processing and Filtering
The XC7K410T-1FFG900C is appropriate for parallel digital signal processing, filtering, modulation, and spectral-analysis systems because its 406,720 logic cells provide substantial implementation capacity and its DSP resources can accelerate multiply-accumulate-heavy pipelines. The block RAM capacity of 28,620 Kb supports coefficient storage, sample histories, and ping-pong buffers, reducing pressure on external memory for tightly coupled operations. The 500 user I/Os make it practical to combine parallel ADC or DAC data paths with serial communication and configuration channels. Achieved sample rate depends on the -1 speed grade, selected I/O standards, clocking, device utilization, and timing closure, so engineers should use AMD Vivado implementation reports to confirm timing rather than infer performance from raw logic-cell count.
پیشنهادی
Test and Measurement Instrumentation
The XC7K410T-1FFG900C fits modular test and measurement instruments that require deterministic acquisition, pattern generation, protocol analysis, and high-speed data export. Its 500 user I/Os support parallel DUT stimulus and response channels, while 16 GTX lanes can connect to high-speed instruments or multiple serial test ports. The large logic capacity permits timing, protocol, and analysis engines to coexist, and the 28,620 Kb of block RAM can capture short acquisition bursts. For laboratory equipment, engineers should isolate analog sections appropriately, provide clean reference clocks, maintain deterministic reset and trigger behavior, and verify output timing with worst-case loading and the selected -1 grade constraints.
پیشنهادی
High-Speed Protocol Bridge and Interface Consolidation
The XC7K410T-1FFG900C can consolidate several legacy parallel interfaces and newer high-speed serial links into one programmable device. Its 500 user I/Os are useful for acquiring legacy bus traffic, while the 16 GTX lanes can carry multiple modern serial protocols. A bridge design can use the 406,720 logic cells for encoding, buffering, arbitration, and fault handling, with 28,620 Kb of block RAM supporting temporary queues between wide parallel domains and narrow serial domains. The device is particularly useful when protocol revisions require field-updatable logic rather than a fixed bridge ASIC. Production designs must include CDC analysis, protocol-specific clock-domain constraints, transceiver calibration strategy, recovery behavior, and complete conformance testing before board release.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای XC7K410T-1FFG900C — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | XC7K410T-1FFG900I | XC7K410T-2FFG900C | XC7K410T-2FFG900I | XC7K410T-3FFG900C | XC7K410T-1FFG900ES |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FFG900 FCBGA, 900 balls | FFG900 FCBGA, 900 balls | FFG900 FCBGA, 900 balls | FFG900 FCBGA, 900 balls | FFG900 FCBGA, 900 balls | FFG900 FCBGA, 900 balls |
| Logic Cells | 406,720 cells | 406,720 cells | 406,720 cells | 406,720 cells | 406,720 cells | 406,720 cells |
| Block RAM | 28,620 Kb | 28,620 Kb | 28,620 Kb | 28,620 Kb | 28,620 Kb | 28,620 Kb |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Speed Grade | -1 | -1 | -2 | -2 | -3 | -1 |
| Temperature Code | C | I | C | I | C | ES |
| GTX Serial Transceiver Lanes | 16 lanes | 16 lanes | 16 lanes | 16 lanes | 16 lanes | 16 lanes |
| Maximum User I/O | 500 I/Os | 500 I/Os | 500 I/Os | 500 I/Os | 500 I/Os | 500 I/Os |
| Special Feature | -1 commercial-temperature speed grade | -1 industrial temperature grade | -2 commercial-temperature speed grade | -2 industrial-temperature speed grade | -3 commercial-temperature speed grade | -1 extended-temperature grade |
تفاوتهای کلیدی
- Exact -1 speed-grade substitution with broader temperature coverage (در مقابلXC7K410T-1FFG900I)
- Higher performance grade without changing the package (در مقابلXC7K410T-2FFG900C)
- Combined speed and temperature-grade option (در مقابلXC7K410T-2FFG900I)
- Highest listed Kintex-7 performance option in the same footprint (در مقابلXC7K410T-3FFG900C)
یادداشتهای طراحی
Use the AMD FFG900 package pinout files and UG475 package-file format before assigning schematic and PCB nets. A 900-ball FCBGA requires deliberate escape routing, power-plane segmentation, and via-in-pad or microvia strategies, depending on the board density and manufacturing process. Separate supplies for core, I/O, and transceiver rails as required by the selected design. Do not reuse a generic 900-ball symbol: the distinction between FFG900 and FBG900 includes package-lid and heat-spreader differences even though the underlying ballout is closely related.
Design the FFG900 thermal path around the highest credible combination of core, I/O, memory, and GTX activity. AMD's power tools and 7-series power guidance should be used with the actual clock rates, utilization, I/O standards, and transceiver states. Cooling performance depends on board area, copper layers, airflow, and the package heat-spreader arrangement. Verify temperature margins at the device, nearby inductors, and power regulators rather than assuming that a nominal airflow value applies to every installed system.
Apply the AMD high-speed serial design methodology to all GTX connections, including reference-clock routing, lane polarity, transmitter configuration, receiver termination, and connector or package escape paths. Validate channel loss, reflection, crosstalk, and jitter against the selected data rate and protocol mask. Keep parallel and high-speed routing separated where practical, use continuous reference planes, and schedule length matching in the PCB tool. Simulation results should be compared with the final stack-up, material properties, and completed board geometry.
Do not treat a same-package FPGA substitution as automatically timing-compatible. The AMD compatibility information notes that XC7K410T-1FFG900C and XQ7K410T-1RF900M are mostly compatible but use different timing files because their temperature ranges differ; a bitstream for one direction may not be valid in the other. For any -1, -2, -3, C, I, or ES change, regenerate constraints, rerun implementation and timing analysis, review power estimates, and confirm the exact ordering code before approving the substitution.
اطلاعات انطباق
The exact compliance records for XC7K410T-1FFG900C were not stated. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status with AMD for the complete orderable MPN before production release.