Infineon

XMC1202T028X0032AAXUMA1 - 32MHz Cortex-M0 MCU | Infineon

MPN: XMC1202T028X0032AAXUMA1 ✓ Aktif
PG-TSSOP-28-16 Package 32 MHz Speed 32 KB (32K x 8) Memory
MOQ: 1 |

XMC1202T028X0032AAXUMA1 Ringkasan

Infineon Technologies XMC1202T028X0032AAXUMA1 is a 32-bit ARM Cortex-M0 industrial microcontroller operating at 32 MHz, with 32 KB of flash memory and 16 KB of SRAM in a PG-TSSOP-28-16 package. The device combines a single Cortex-M0 core with 20 I/O pins, 14-channel 12-bit ADC capability, and communication interfaces including I2C, LIN, SPI, and UART/USART.

An ARM Cortex-M0 microcontroller is a compact 32-bit embedded-control component designed to execute firmware, monitor analog signals, and coordinate digital peripherals. Within the product hierarchy, this device belongs to the microcontroller, embedded processor, and semiconductor categories. Its combination of modest flash and SRAM capacity, mixed-signal peripherals, and industrial positioning makes it suitable for compact control nodes that do not require a high-performance application processor or a large memory footprint.

The principal features of the XMC1202T028X0032AAXUMA1 include a 32 MHz Cortex-M0 core, 32 KB flash, 16 KB SRAM, 20 I/O pins, and a 14-channel 12-bit ADC. Integrated serial interfaces support I2C, LIN, SPI, and UART/USART communication. Additional system functions identified in the product documentation include brown-out detection and reset, I2S, power-on reset, PWM, and a watchdog timer, enabling compact designs to handle analog measurement, communications, timing, and supervisory functions without separate discrete devices.

The XMC1000 family is manufactured using a 65 nm process and targets applications that need more capability than an 8-bit controller while keeping system complexity and memory requirements controlled. Firmware execution is handled by the ARM Cortex-M0 core, while the ADC, PWM, communication peripherals, watchdog, and reset functions support embedded acquisition and actuator-control designs. The 28-pin package also provides a practical footprint for medium-density industrial and embedded-control boards.

Typical uses include industrial sensor modules, LIN-connected automotive and building-control nodes, compact motor-control systems, communications equipment, and low-cost data-acquisition controllers. The I2C and SPI interfaces allow the MCU to connect sensors and external memory, while UART/USART and LIN support point-to-point or network communications. The 14-channel 12-bit ADC is particularly useful for monitoring multiple analog inputs in compact equipment.

A critical design consideration is analog-signal conditioning. The ADC input range, source impedance, acquisition time, reference-voltage stability, and grounding must be evaluated together, and the package power and ground pins should be connected with short, low-impedance PCB paths. Firmware must also configure the appropriate clock, reset, watchdog, and peripheral pins before normal operation.

This page combines manufacturer specifications, interface details, application guidance, and a verified same-package option into a compact engineering reference. It is intended to help designers evaluate memory, analog conversion, communications, package, and replacement requirements before beginning PCB layout or firmware development.

Pilihan pengganti yang segera untuk XMC1202T028X0032AAXUMA1 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera XMC1202T028X0032AAXUMA1 (sama faktor bentuk dan kaki) — berbeza dalam ADC Resolution, Flash Memory, Product Type.

Infineon
ADC Resolution: 12 bit
Flash Memory: 32 KB
Product Type: Industrial 32-bit microcontroller
Bandingkan Dengan XMC1202T028X0032AAXUMA1 →

XMC1202T028X0032ABXUMA1

✅ Masuk Drop-In
Infineon
📦 PG-TSSOP-28-16
Industrial 32-bit microcontroller · ARM Cortex-M0 · 32 MHz · 32-bit · 32 KB · 32K x 8 · 16 KB · 12 bit

Hubungi untuk harga

Lihat Datasheet →

XMC1202T028X0032AAXUMA1 Penilaian maksimum & Ciri-ciri Elektrik

Product Type 32-bit industrial microcontroller
Processor Core ARM Cortex-M0
CPU Frequency 32 MHz
Architecture 32-bit
Core Count 1 core
Flash Memory 32 KB (32K x 8)
SRAM 16 KB
GPIO Count 20 I/O pins
ADC Resolution 12-bit
ADC Channels 14 channels
Serial Interfaces I2C, LIN, SPI, and UART/USART
Additional Peripherals Brown-out detection and reset, I2S, power-on reset, PWM, and watchdog timer
Kemasan PG-TSSOP-28-16
Manufacturing Process 65 nm
Product Series XMC1000
Status RoHS Compliant
Lead-Free Status Lead free

Panduan Konfigurasi Pin XMC1202T028X0032AAXUMA1 pg-tssop-28-16

Konfigurasi pin untuk XMC1202T028X0032AAXUMA1 (pg-tssop-28-16 pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai pg-tssop-28-16 untuk XMC1202T028X0032AAXUMA1

Tiada data garisan pin yang diperoleh untuk XMC1202T028X0032AAXUMA1.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

XMC1202T028X0032AAXUMA1 patut untuk 6 aplikasis: Industrial Sensor Acquisition, LIN-Connected Control Node, Compact Motor and PWM Control, Building Automation Controller, Embedded Communications Module, Industrial Data Logger.

🏭

Industrial Sensor Acquisition

The XMC1202T028X0032AAXUMA1 suits compact sensor-hub designs because its 14-channel 12-bit ADC can monitor multiple analog inputs while the 32 MHz Cortex-M0 core performs filtering, calibration, and control. I2C and SPI provide flexible connections to sensors and external storage, while UART/USART supports host communication. The 32 KB flash and 16 KB SRAM are appropriate for focused acquisition logic. Board design must include careful reference grounding, input filtering, and signal paths that satisfy the ADC source-impedance and acquisition-time requirements.

🚗

LIN-Connected Control Node

The XMC1202T028X0032AAXUMA1 is appropriate for compact LIN nodes because LIN support is integrated alongside a 32 MHz Cortex-M0 core and 20 I/O pins. Firmware can coordinate actuator commands, digital inputs, PWM outputs, and diagnostic functions without an external communications controller. I2C and SPI remain available for local sensors, and the watchdog adds supervisory protection. Confirm the electrical requirements of the selected LIN transceiver and isolate its supply and signal routing appropriately from sensitive analog circuitry.

🔧

Compact Motor and PWM Control

The XMC1202T028X0032AAXUMA1 can serve as the supervisory controller in small motor or valve-control systems because PWM, multiple I/O, and serial communications are available around a deterministic 32 MHz Cortex-M0 core. A dedicated gate driver remains necessary for the power stage, while the MCU manages position or sensor inputs, current operating modes, and fault reporting. Brown-out detection and watchdog support improve robustness. Select external drive components and protection networks for the exact motor voltage, current, and switching environment.

🧩

Building Automation Controller

The XMC1202T028X0032AAXUMA1 fits small building-automation endpoints that combine environmental measurement with local actuator control. Its 14-channel 12-bit ADC supports analog sensor inputs, while I2C and SPI can connect digital sensors or expansion devices. UART/USART and LIN support supervisory communications, and PWM can control compatible valve or light functions. The 16 KB SRAM and 32 KB flash are suitable for lightweight protocols and control logic. Firmware should include watchdog servicing, brown-out behavior, and safe output states during communication loss.

🌐

Embedded Communications Module

The XMC1202T028X0032AAXUMA1 can manage a compact protocol-conversion or communications module because it supports UART/USART, I2C, and SPI on one 32-bit controller. The 32 MHz Cortex-M0 core can frame messages, supervise the watchdog, and maintain peripheral timing while 20 I/O pins handle indicators, configuration inputs, and handshake signals. Its 32 KB flash and 16 KB SRAM suit protocol stacks with moderate buffering requirements. Use low-impedance ground routing and disciplined clock and reset layouts to avoid communication errors.

🖥️

Industrial Data Logger

The XMC1202T028X0032AAXUMA1 is well matched to a compact industrial data logger that records analog measurements and communicates results through UART/USART, LIN, I2C, or SPI. Fourteen 12-bit ADC channels provide parallel measurement capability, while the 32 MHz core handles buffering and formatting. PWM and GPIO support status and control signals, and brown-out detection supports safe recovery. Storage capacity, write endurance, data timestamps, and environmental limits must be evaluated against the logger's sampling rate and retention requirements.

What are the key specifications of XMC1202T028X0032AAXUMA1?
The XMC1202T028X0032AAXUMA1 combines a 32 MHz ARM Cortex-M0 core, 32 KB of flash, 16 KB of SRAM, and 20 I/O pins in a PG-TSSOP-28-16 package. According to the Infineon XMC1000 product information, it also provides a 14-channel 12-bit ADC and I2C, LIN, SPI, and UART/USART interfaces. These resources make it suitable for compact embedded-control, analog-monitoring, and industrial communications designs.
What type of microcontroller is XMC1202T028X0032AAXUMA1?
The XMC1202T028X0032AAXUMA1 is a 32-bit industrial ARM Cortex-M0 microcontroller in Infineon's XMC1000 family. The manufacturer identifies a 32 MHz operating frequency, 32 KB flash, and 16 KB SRAM as its principal computing resources. It is intended for embedded applications requiring mixed-signal measurement, serial communications, PWM generation, watchdog supervision, and controlled I/O expansion without a larger application processor.
Where can I download the XMC1202T028X0032AAXUMA1 datasheet and package information?
The official Infineon package drawing for XMC1202T028X0032AAXUMA1 is available as a PDF at infineon.com. Use that drawing to confirm PG-TSSOP-28-16 land geometry, pin-1 orientation, and recommended stencil and solder-mask details. The XMC1202 family product page provides the associated ordering and parameter information, while the complete device pin descriptions and electrical limits should be taken from the manufacturer datasheet for the exact ordering code.
Where is the pinout for XMC1202T028X0032AAXUMA1?
The XMC1202T028X0032AAXUMA1 uses a PG-TSSOP-28-16 package, and Infineon publishes an official PDF showing its recommended land pattern and mechanical drawing. Use the pin-description table in the manufacturer datasheet when assigning every signal because the package drawing establishes geometry but does not replace the electrical pin descriptions. The published family page also identifies 20 I/O pins and the integrated ADC and serial-interface functions.
What can replace XMC1202T028X0032AAXUMA1?
XMC1202T028X0032ABXUMA1 is a documented same-package replacement candidate for XMC1202T028X0032AAXUMA1. Both are Infineon XMC1000 devices listed with a 32 MHz Cortex-M0 core, 32 KB flash, 16 KB SRAM, and PG-TSSOP-28-16 package. Before substitution, verify the exact suffix, temperature range, pin definitions, and qualification requirements against the manufacturer datasheets; the listing snippets alone do not establish every ordering-code difference.
Is XMC1202T028X0032ABXUMA1 a drop-in replacement for XMC1202T028X0032AAXUMA1?
XMC1202T028X0032ABXUMA1 is the closest documented replacement candidate because it retains the PG-TSSOP-28-16 package and the listed 32 MHz, 32 KB flash, and 16 KB SRAM ratings. Treat it as a drop-in candidate only after checking the suffix-specific pin table, operating limits, and qualification markings in the exact Infineon documentation. A package match alone does not authorize changes to firmware, clock, ADC, or brown-out configuration.
What is the best alternative to XMC1202T028X0032AAXUMA1 for industrial control?
For industrial control, the closest identified alternative is Infineon XMC1202T028X0032ABXUMA1 because it is listed with the same Cortex-M0 core speed, memory sizes, and PG-TSSOP-28-16 package. No verified cross-manufacturer pin-compatible replacement was identified for this exact device. If the ordering-suffix differences fail your qualification review, retain the original MPN or redesign around a deliberately selected MCU rather than assuming an unrelated 28-pin controller is interchangeable.
When should I choose XMC1202T028X0032AAXUMA1 over another 32-bit MCU?
Choose XMC1202T028X0032AAXUMA1 when a design needs a 32 MHz Cortex-M0 core, 32 KB flash, 16 KB SRAM, and a 14-channel 12-bit ADC in a 28-pin TSSOP footprint. Its I2C, LIN, SPI, UART/USART, PWM, watchdog, and brown-out functions support compact control nodes with modest memory requirements. Select a different MCU when the application needs more flash, SRAM, GPIO, clock performance, or advanced analog and communications resources.
Is XMC1202T028X0032AAXUMA1 suitable for industrial sensor and LIN applications?
The XMC1202T028X0032AAXUMA1 is suitable for many industrial sensor and LIN-connected control applications because it combines a 14-channel 12-bit ADC with LIN, I2C, SPI, UART/USART, PWM, and watchdog functions. Its 32 MHz Cortex-M0 core provides deterministic processing for sensor conditioning and communication tasks. Confirm the ADC input range, required sampling rate, LIN transceiver interface, and environmental qualification for the finished system.
What is the difference between XMC1202T028X0032AAXUMA1 and XMC1202T028X0032ABXUMA1?
The listed specifications of XMC1202T028X0032AAXUMA1 and XMC1202T028X0032ABXUMA1 are both based on a 32 MHz ARM Cortex-M0 core, 32 KB flash, 16 KB SRAM, and the PG-TSSOP-28-16 package. The visible ordering suffixes differ by the final AA versus AB segment, which can encode ordering or qualification information. Review the exact manufacturer ordering table and datasheet before treating the two devices as interchangeable.
How much power and current does XMC1202T028X0032AAXUMA1 use?
The manufacturer product information establishes the device as a 32 MHz XMC1000 Cortex-M0 microcontroller, but a complete operating-current and power-consumption table is required for final design calculations. Use the exact datasheet current limits for active mode, sleep mode, peripheral operation, and I/O loading rather than estimating from clock speed. PCB power planning should also include regulator efficiency, external pull networks, sensors, and communications transceivers.
Where can I buy XMC1202T028X0032AAXUMA1 and check its lead time?
Use the Request a Quote form on this page to request the current price, stock position, minimum order quantity, and production lead time for XMC1202T028X0032AAXUMA1. The part is currently listed for acquisition, but availability can vary by package, quantity, and shipment destination. Include your target quantity and required delivery date in the request for a production-suitable quotation.
How much does XMC1202T028X0032AAXUMA1 cost?
The current price of XMC1202T028X0032AAXUMA1 is generated through the Request a Quote form on this page rather than published as a static quotation. Submit the required quantity, package preference, ship-to country, and target delivery schedule to obtain the applicable commercial offer. This approach also allows the manufacturer channel to confirm allocation and lead time for the exact ordering code.
Is XMC1202T028X0032AAXUMA1 in stock?
The device is currently presented as available for acquisition, but the Request a Quote form on this page should be used to confirm live stock for the required quantity. Inventory may change between quote requests, particularly for industrial microcontrollers ordered in volume. State the required shipment quantity and target date so the quotation can reflect the appropriate supply condition.
Does XMC1202T028X0032AAXUMA1 meet RoHS and lead-free requirements?
The XMC1202T028X0032AAXUMA1 listing identifies the exact device as RoHS compliant and lead free. Those attributes support use in electronics subject to hazardous-substance restrictions. They do not by themselves establish AEC-Q100 qualification, REACH conformance, halogen-free status, or conflict-minerals compliance; use the manufacturer product page and current declarations for those separate requirements.

Data referensi kejuruteraan untuk XMC1202T028X0032AAXUMA1 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose XMC1202T028X0032AAXUMA1 for compact industrial-control designs that need a 32 MHz Cortex-M0 core, 32 KB flash, 16 KB SRAM, a 14-channel 12-bit ADC, and I2C, LIN, SPI, UART/USART, PWM, watchdog, and brown-out functions in PG-TSSOP-28-16. Choose XMC1202T028X0032ABXUMA1 when its ordering-suffix documentation satisfies the temperature, qualification, and pin-definition requirements; its listed core, memory, and package ratings match the target. No verified cross-manufacturer pin-compatible option was identified, so do not select an unrelated 28-pin MCU merely because its dimensions match. If your design exceeds 32 KB flash, 16 KB SRAM, 20 I/O pins, or the available ADC resources, choose a higher-density microcontroller and treat it as a redesign rather than a drop-in substitution.

Perbandingan dengan Gantian

Parametr Produk Ini XMC1202T028X0032ABXUMA1
Package PG-TSSOP-28-16 PG-TSSOP-28-16
Brand Infineon Technologies Infineon Technologies
Processor Core ARM Cortex-M0 ARM Cortex-M0
CPU Frequency 32 MHz 32 MHz
Flash Memory 32 KB 32 KB
SRAM 16 KB 16 KB

Penyeberangsung Jelas

  • Matches the closest documented replacement in all listed core and memory ratings (vsXMC1202T028X0032ABXUMA1)
  • Uses the same compact 28-pin control-package footprint (vsXMC1202T028X0032ABXUMA1)
  • Combines digital control and analog acquisition in one device (vsXMC1202T028X0032ABXUMA1)

Catatan Desain

Follow the Infineon PG-TSSOP-28-16 land-pattern and stencil drawing when defining the PCB footprint. Confirm pin-1 orientation, pad lengths, solder-mask openings, and the exposed copper treatment against the official package PDF before releasing Gerber files. Place decoupling capacitors close to the device power pins and connect ground returns directly to the corresponding ground pins with uninterrupted paths.

Treat analog inputs as precision signal paths: keep them away from PWM edges, clock lines, and switching-node copper; use short traces; and provide local reference and return paths. Verify the maximum source impedance for the selected sampling time with the ADC acquisition model. If a sensor output cannot meet that requirement, add a suitable buffer and include the buffer's offset, noise, settling time, and supply range in the error budget.

Do not infer every functional difference from the package and headline electrical specifications. For an AA-to-AB substitution, compare the exact manufacturer ordering codes, pin-description table, operating-temperature range, qualification markings, flash-programming limits, and errata documents. Preserve reset, brown-out, watchdog, and clock settings in the migration review, and regression-test communications and ADC behavior before production release.

Maklumat Kesediaan

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Yes
Bosong halogen
Unknown
Mineral konflik
Unknown

The exact-device listing identifies RoHS compliance and lead-free construction. No exact-order-code AEC-Q100, REACH, halogen-free, or conflict-minerals declaration was identified.

Data disahkan pada: 2026-11-16 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

XMC1202T028X0032AAXUMA1 datasheet XMC1202T028X0032AAXUMA1 pinout XMC1202T028X0032AAXUMA1 datasheet pdf XMC1202T028X0032AAXUMA1 equivalent XMC1202T028X0032AAXUMA1 replacement XMC1202T028X0032AAXUMA1 cross reference XMC1202T028X0032AAXUMA1 footprint XMC1202T028X0032AAXUMA1 price XMC1202T028X0032AAXUMA1 stock Infineon XMC1202T028X0032AAXUMA1 XMC1202T028X0032AAXUMA1 vs XMC1202T028X0032ABXUMA1 XMC1202 32MHz Cortex-M0 microcontroller PG-TSSOP-28-16 XMC1202 pinout XMC1202 industrial sensor application

Komponen dan Tanda berkaitan

Infineon Technologies XMC1202T028X0032AAXUMA1 XMC1202T028X0032ABXUMA1 XMC1000 ARM Cortex-M0 microcontroller embedded processor 32-bit microcontroller industrial microcontroller semiconductor PG-TSSOP-28-16 TSSOP package family surface-mount package I2C LIN bus SPI UART/USART 12-bit ADC PWM watchdog timer brown-out detection I2S 65 nm process RoHS lead-free electronics
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ