XMC1202T028X0032AAXUMA1 - 32MHz Cortex-M0 MCU | Infineon
부품 번호: XMC1202T028X0032AAXUMA1 ✓ 활성XMC1202T028X0032AAXUMA1 개요
An ARM Cortex-M0 microcontroller is a compact 32-bit embedded-control component designed to execute firmware, monitor analog signals, and coordinate digital peripherals. Within the product hierarchy, this device belongs to the microcontroller, embedded processor, and semiconductor categories. Its combination of modest flash and SRAM capacity, mixed-signal peripherals, and industrial positioning makes it suitable for compact control nodes that do not require a high-performance application processor or a large memory footprint.
The principal features of the XMC1202T028X0032AAXUMA1 include a 32 MHz Cortex-M0 core, 32 KB flash, 16 KB SRAM, 20 I/O pins, and a 14-channel 12-bit ADC. Integrated serial interfaces support I2C, LIN, SPI, and UART/USART communication. Additional system functions identified in the product documentation include brown-out detection and reset, I2S, power-on reset, PWM, and a watchdog timer, enabling compact designs to handle analog measurement, communications, timing, and supervisory functions without separate discrete devices.
The XMC1000 family is manufactured using a 65 nm process and targets applications that need more capability than an 8-bit controller while keeping system complexity and memory requirements controlled. Firmware execution is handled by the ARM Cortex-M0 core, while the ADC, PWM, communication peripherals, watchdog, and reset functions support embedded acquisition and actuator-control designs. The 28-pin package also provides a practical footprint for medium-density industrial and embedded-control boards.
Typical uses include industrial sensor modules, LIN-connected automotive and building-control nodes, compact motor-control systems, communications equipment, and low-cost data-acquisition controllers. The I2C and SPI interfaces allow the MCU to connect sensors and external memory, while UART/USART and LIN support point-to-point or network communications. The 14-channel 12-bit ADC is particularly useful for monitoring multiple analog inputs in compact equipment.
A critical design consideration is analog-signal conditioning. The ADC input range, source impedance, acquisition time, reference-voltage stability, and grounding must be evaluated together, and the package power and ground pins should be connected with short, low-impedance PCB paths. Firmware must also configure the appropriate clock, reset, watchdog, and peripheral pins before normal operation.
This page combines manufacturer specifications, interface details, application guidance, and a verified same-package option into a compact engineering reference. It is intended to help designers evaluate memory, analog conversion, communications, package, and replacement requirements before beginning PCB layout or firmware development.
드롭인 대체품: XMC1202T028X0032AAXUMA1 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XMC1202T028X0032AAXUMA1 (동일 폼 팩터 및 풋프린트) — 차이점: ADC Resolution, Flash Memory, Product Type.
XMC1202T028X0032ABXUMA1
✅ 드롭인가격 문의
데이터시트 보기 →XMC1202T028X0032AAXUMA1 최대 정격 & 전기적 특성
| Product Type | 32-bit industrial microcontroller |
| Processor Core | ARM Cortex-M0 |
| CPU Frequency | 32 MHz |
| Architecture | 32-bit |
| Core Count | 1 core |
| Flash Memory | 32 KB (32K x 8) |
| SRAM | 16 KB |
| GPIO Count | 20 I/O pins |
| ADC Resolution | 12-bit |
| ADC Channels | 14 channels |
| Serial Interfaces | I2C, LIN, SPI, and UART/USART |
| Additional Peripherals | Brown-out detection and reset, I2S, power-on reset, PWM, and watchdog timer |
| 패키지 | PG-TSSOP-28-16 |
| Manufacturing Process | 65 nm |
| Product Series | XMC1000 |
| RoHS 상태 | Compliant |
| Lead-Free Status | Lead free |
XMC1202T028X0032AAXUMA1 pg-tssop-28-16 핀 구성 가이드
XMC1202T028X0032AAXUMA1(pg-tssop-28-16 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XMC1202T028X0032AAXUMA1.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XMC1202T028X0032AAXUMA1 적합 용도: 6 애플리케이션s: Industrial Sensor Acquisition, LIN-Connected Control Node, Compact Motor and PWM Control, Building Automation Controller, Embedded Communications Module, Industrial Data Logger.
Industrial Sensor Acquisition
The XMC1202T028X0032AAXUMA1 suits compact sensor-hub designs because its 14-channel 12-bit ADC can monitor multiple analog inputs while the 32 MHz Cortex-M0 core performs filtering, calibration, and control. I2C and SPI provide flexible connections to sensors and external storage, while UART/USART supports host communication. The 32 KB flash and 16 KB SRAM are appropriate for focused acquisition logic. Board design must include careful reference grounding, input filtering, and signal paths that satisfy the ADC source-impedance and acquisition-time requirements.
추천
LIN-Connected Control Node
The XMC1202T028X0032AAXUMA1 is appropriate for compact LIN nodes because LIN support is integrated alongside a 32 MHz Cortex-M0 core and 20 I/O pins. Firmware can coordinate actuator commands, digital inputs, PWM outputs, and diagnostic functions without an external communications controller. I2C and SPI remain available for local sensors, and the watchdog adds supervisory protection. Confirm the electrical requirements of the selected LIN transceiver and isolate its supply and signal routing appropriately from sensitive analog circuitry.
추천
Compact Motor and PWM Control
The XMC1202T028X0032AAXUMA1 can serve as the supervisory controller in small motor or valve-control systems because PWM, multiple I/O, and serial communications are available around a deterministic 32 MHz Cortex-M0 core. A dedicated gate driver remains necessary for the power stage, while the MCU manages position or sensor inputs, current operating modes, and fault reporting. Brown-out detection and watchdog support improve robustness. Select external drive components and protection networks for the exact motor voltage, current, and switching environment.
추천
Building Automation Controller
The XMC1202T028X0032AAXUMA1 fits small building-automation endpoints that combine environmental measurement with local actuator control. Its 14-channel 12-bit ADC supports analog sensor inputs, while I2C and SPI can connect digital sensors or expansion devices. UART/USART and LIN support supervisory communications, and PWM can control compatible valve or light functions. The 16 KB SRAM and 32 KB flash are suitable for lightweight protocols and control logic. Firmware should include watchdog servicing, brown-out behavior, and safe output states during communication loss.
추천
Embedded Communications Module
The XMC1202T028X0032AAXUMA1 can manage a compact protocol-conversion or communications module because it supports UART/USART, I2C, and SPI on one 32-bit controller. The 32 MHz Cortex-M0 core can frame messages, supervise the watchdog, and maintain peripheral timing while 20 I/O pins handle indicators, configuration inputs, and handshake signals. Its 32 KB flash and 16 KB SRAM suit protocol stacks with moderate buffering requirements. Use low-impedance ground routing and disciplined clock and reset layouts to avoid communication errors.
추천
Industrial Data Logger
The XMC1202T028X0032AAXUMA1 is well matched to a compact industrial data logger that records analog measurements and communicates results through UART/USART, LIN, I2C, or SPI. Fourteen 12-bit ADC channels provide parallel measurement capability, while the 32 MHz core handles buffering and formatting. PWM and GPIO support status and control signals, and brown-out detection supports safe recovery. Storage capacity, write endurance, data timestamps, and environmental limits must be evaluated against the logger's sampling rate and retention requirements.
추천
추천 제품 요약
엔지니어링 참조 데이터: XMC1202T028X0032AAXUMA1 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XMC1202T028X0032ABXUMA1 |
|---|---|---|
| Package | PG-TSSOP-28-16 | PG-TSSOP-28-16 |
| Brand | Infineon Technologies | Infineon Technologies |
| Processor Core | ARM Cortex-M0 | ARM Cortex-M0 |
| CPU Frequency | 32 MHz | 32 MHz |
| Flash Memory | 32 KB | 32 KB |
| SRAM | 16 KB | 16 KB |
주요 차별점
- Matches the closest documented replacement in all listed core and memory ratings (vs XMC1202T028X0032ABXUMA1)
- Uses the same compact 28-pin control-package footprint (vs XMC1202T028X0032ABXUMA1)
- Combines digital control and analog acquisition in one device (vs XMC1202T028X0032ABXUMA1)
설계 노트
Follow the Infineon PG-TSSOP-28-16 land-pattern and stencil drawing when defining the PCB footprint. Confirm pin-1 orientation, pad lengths, solder-mask openings, and the exposed copper treatment against the official package PDF before releasing Gerber files. Place decoupling capacitors close to the device power pins and connect ground returns directly to the corresponding ground pins with uninterrupted paths.
Treat analog inputs as precision signal paths: keep them away from PWM edges, clock lines, and switching-node copper; use short traces; and provide local reference and return paths. Verify the maximum source impedance for the selected sampling time with the ADC acquisition model. If a sensor output cannot meet that requirement, add a suitable buffer and include the buffer's offset, noise, settling time, and supply range in the error budget.
Do not infer every functional difference from the package and headline electrical specifications. For an AA-to-AB substitution, compare the exact manufacturer ordering codes, pin-description table, operating-temperature range, qualification markings, flash-programming limits, and errata documents. Preserve reset, brown-out, watchdog, and clock settings in the migration review, and regression-test communications and ADC behavior before production release.
규정 준수 정보
The exact-device listing identifies RoHS compliance and lead-free construction. No exact-order-code AEC-Q100, REACH, halogen-free, or conflict-minerals declaration was identified.