XMC1202T028X0032ABXUMA1 - 32MHz Cortex-M0 MCU | Infineon
MPN: XMC1202T028X0032ABXUMA1 ✓ ActiveXMC1202T028X0032ABXUMA1 Overview
An ARM Cortex-M0 microcontroller is a low-complexity 32-bit processor within the embedded microcontroller hierarchy. It combines a general-purpose CPU core, flash program memory, SRAM, digital peripherals, and analog interfaces in one integrated circuit. The Cortex-M0 architecture is designed for compact control systems where deterministic execution, low peripheral complexity, and economical integration are more important than high-performance computing or a large memory map.
The XMC1202 provides 32 KB of flash for application code and 16 KB of SRAM for working data. Its 32 MHz operating frequency supports responsive control loops, while the 12-bit ADC enables direct measurement of analog sensor signals without a separate converter. The 1.8 V to 5.5 V operating range accommodates industrial 3.3 V systems as well as lower-voltage designs where suitable. An integrated temperature sensor and the XMC1000 family’s application-oriented peripherals further broaden its usefulness for compact embedded nodes.
The device belongs to Infineon’s XMC1000 family, a series of industrial microcontrollers built around ARM Cortex-M0. Its architecture prioritizes a compact instruction set, moderate memory capacity, and integration of common analog and digital control functions. These characteristics make the XMC1202 appropriate for cost-sensitive applications that do not require the processing power, memory density, or peripheral breadth of a high-end microcontroller family.
Typical uses include industrial sensor modules, building automation endpoints, motor and actuator controllers, compact power-conversion controllers, and low-cost connected equipment. The combination of 32 KB flash, 16 KB SRAM, a 12-bit ADC, and a 28-pin package allows a complete control node to fit on a small PCB while retaining enough memory for protocol handling, calibration, and supervisory logic.
PCB design should preserve the package’s thermal and electrical layout constraints, route analog inputs away from fast digital signals, and place decoupling capacitors close to the supply pins. Because this ordering code uses a 16-lead implementation within a 28-pin body, designers should follow the Infineon package drawing and pin-description table rather than assuming a conventional 28-lead assignment.
This page combines the manufacturer’s ordering information, package and memory characteristics, replacement options, application guidance, and engineering design notes. It is intended to help engineers evaluate whether the XMC1202 meets a board’s processing, analog, memory, package, and lifecycle requirements before beginning hardware or firmware development.
Drop-in alternatives for XMC1202T028X0032ABXUMA1 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
XMC1201-T028X0032-AB
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
XMC1200-T028X0032-AB
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
XMC1203-T028X0032-AB
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
XMC1204-T028X0032-AB
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
XMC1202-T028X0032-AB
✅ Drop-In📋 Reference alternative (not in catalog)
XMC1202T028X0032ABXUMA1 Maximum Ratings & Electrical Characteristics
| Product Type | Industrial 32-bit microcontroller |
| Processor Core | ARM Cortex-M0 |
| Maximum Core Frequency | 32 MHz |
| Architecture | 32-bit |
| Flash Memory | 32 KB |
| Flash Organization | 32K x 8 |
| SRAM | 16 KB |
| ADC Resolution | 12 bit |
| Operating Voltage | 1.8 V to 5.5 V |
| Series | XMC1000 |
| Device Variant | XMC1202 |
| Package | PG-TSSOP-28-16 |
| Total Package Pins | 28 |
| Connected Leads | 16 |
| Operating Temperature | -40 °C to 105 °C |
| Packaging | Tape & Reel (TR) or Cut Tape (CT) |
| Mounting Type | Surface mount |
XMC1202T028X0032ABXUMA1 28 Pin Configuration Guide
Pin configuration for XMC1202T028X0032ABXUMA1 (28 package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for XMC1202T028X0032ABXUMA1.
Refer to the datasheet for full pin configuration.
Typical Applications
XMC1202T028X0032ABXUMA1 is suitable for 6 applications: Industrial Sensor Node, Building Automation Endpoint, Compact Motor Controller, Battery-Powered Control Module, Digital Power Controller, Low-Cost Communication Controller.
Industrial Sensor Node
The XMC1202T028X0032ABXUMA1 fits compact industrial sensor nodes because its 12-bit ADC can digitize analog inputs while the 32 MHz Cortex-M0 core handles sampling, filtering, and local decisions. The 32 KB flash provides space for calibration tables, communication protocols, and diagnostics, while 16 KB of SRAM supports working buffers without requiring a larger controller. Its 1.8 V to 5.5 V operating range supports 3.3 V industrial systems, although the exact input range at each peripheral and operating temperature must be checked. Place the MCU close to the sensor interface, keep analog traces short, and follow the manufacturer grounding and decoupling guidance to reduce conversion error and digital coupling.
Recommended
Building Automation Endpoint
The Infineon XMC1202T028X0032ABXUMA1 is suitable for building automation endpoints that monitor inputs and control relays, valves, or actuator interfaces. Its 32 MHz Cortex-M0 processing capability supports responsive state-machine and debouncing logic, and the integrated 12-bit ADC supports analog sensors such as temperature or occupancy devices. With 32 KB flash and 16 KB SRAM, it can host network handling and local logic in one device. The PG-TSSOP-28-16 package also supports compact controller boards. Confirm which pins provide the required communication and timer functions before layout, and isolate inductive loads from analog and reset circuitry to improve reliability.
Recommended
Compact Motor Controller
The XMC1202T028X0032ABXUMA1 can serve as the supervisory controller in a small motor or actuator-control module. A 32 MHz Cortex-M0 core can execute commutation, position, or closed-loop control tasks, while the 12-bit ADC can monitor current or position-sensor signals. Its 32 KB flash and 16 KB SRAM are adequate for focused firmware rather than complex user-interface workloads. The principal design trade-off is that the MCU does not provide the high-resolution analog output and sophisticated motor-control peripherals found in dedicated motion controllers. Validate timer channels, PWM outputs, pin multiplexing, and thermal conditions against the manufacturer documentation before using it in a power stage.
Recommended
Battery-Powered Control Module
The XMC1202T028X0032ABXUMA1 can serve as the control device in a battery-powered sensing or switching module, particularly when low-voltage operation and compact packaging are priorities. Its 1.8 V minimum operating voltage supports systems designed around 1.8 V logic, while the 32 MHz Cortex-M0 core provides more processing headroom than required for simple sampling tasks. The 32 KB flash is useful for protocol handlers and configuration data, but the final power budget depends on the selected Infineon device configuration, clock settings, and sleep behavior. Use low-leakage external components and validate idle current over the complete temperature range rather than estimating battery life from active current alone.
Recommended
Digital Power Controller
The XMC1202T028X0032ABXUMA1 is applicable to supervisory control in compact digital power systems where an MCU must monitor converter state, coordinate enable sequencing, and manage fault reporting. The 12-bit ADC can observe output voltage or current, and the 32 MHz core can execute control and fault-handling routines. Its limited flash and SRAM make it more appropriate for secondary supervisory loops than elaborate digital power algorithms. Keep high-current switching paths and magnetic components physically separated from the analog measurement area, route feedback traces away from switching nodes, and verify whether the chosen PG-TSSOP-28-16 variant exposes the required timer, communication, and fault pins.
Recommended
Low-Cost Communication Controller
The XMC1202T028X0032ABXUMA1 can act as a protocol and data-routing controller in a compact communications module. Its 32-bit Cortex-M0 core can handle framed data, timers, state machines, and service diagnostics, while 32 KB flash and 16 KB SRAM support a focused embedded protocol stack. The package is small enough for space-constrained boards, and the 1.8 V to 5.5 V range supports mixed-voltage interfaces when suitable level shifters are used. Ensure the selected communication peripheral is available on pins exposed by the PG-TSSOP-28-16 configuration. Check timing tolerance, interrupt requirements, bootloader behavior, and maximum bus loading before replacing a higher-performance communications controller.
Recommended
Recommended Products Summary
Engineering reference data for XMC1202T028X0032ABXUMA1 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | XMC1201-T028X0032-AB | XMC1200-T028X0032-AB | XMC1203-T028X0032-AB | XMC1204-T028X0032-AB | XMC1202-T028X0032-AB |
|---|---|---|---|---|---|---|
| Package | PG-TSSOP-28-16 | PG-TSSOP-28-16 | PG-TSSOP-28-16 | PG-TSSOP-28-16 | PG-TSSOP-28-16 | PG-TSSOP-28-16 |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Processor Core | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 |
| Maximum Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Series | XMC1000 | XMC1000 | XMC1000 | XMC1000 | XMC1000 | XMC1000 |
| Product Classification | Industrial microcontroller | Industrial microcontroller | Industrial microcontroller | Industrial microcontroller | Industrial microcontroller | Industrial microcontroller |
| Architecture | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit |
Key Differentiators
- Specified 12-bit ADC integration (vs XMC1200-T028X0032-AB)
- 32 MHz Cortex-M0 processing platform (vs XMC1201-T028X0032-AB)
- Exact manufacturer ordering designation (vs XMC1202-T028X0032-AB)
- Application-oriented XMC1202 peripheral selection (vs XMC1203-T028X0032-AB)
Design Notes
Use the Infineon PG-TSSOP-28-16 package drawing for land pattern, lead width, pitch, and solder-mask geometry. This ordering option has 28 package positions but 16 connected leads, so a standard TSSOP-28 footprint or pin numbering diagram must not be assumed. Place the decoupling network directly across the relevant supply and ground pins, keep the return path short, and inspect the footprint in the PCB editor against both the mechanical drawing and pin-description table.
Route 12-bit ADC inputs away from switching nodes, clock outputs, relay drivers, and high-current power paths. Use a continuous ground reference beneath or adjacent to the analog section, keep analog traces short, and connect the analog ground and digital ground according to the manufacturer’s reference layout. If the sensor source has high source impedance, add the recommended charge-transfer or sampling support circuit rather than overloading the ADC input network.
Design the 1.8 V to 5.5 V supply rail so it remains valid under the required operating temperature and peripheral-load conditions. Place bulk and local ceramic capacitance near the controller and power-entry points, and check startup sequencing if another device controls the MCU supply. The 32 MHz core supports deterministic control, but active current depends on clock configuration and enabled peripherals, so battery and thermal calculations should use the worst-case operating mode specified in the datasheet.
Do not substitute a generic Cortex-M0 MCU solely because its frequency, memory size, and package appear similar. Bootstrapping, vector-table layout, peripheral pin multiplexing, timer behavior, ADC characteristics, clock requirements, and firmware configuration are device-specific. For an XMC1202-family substitution, compare every exposed signal on the 16 connected leads and revalidate startup, watchdog, debug, and communication functions before releasing the change to production.
Compliance Information
The manufacturer product page identifies the device as an industrial microcontroller, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified. Confirm compliance with the current manufacturer documentation before procurement.