XMC1202T028X0032AAXUMA1 - 32MHz Cortex-M0 MCU | Infineon
MPN: XMC1202T028X0032AAXUMA1 ✓ 啟用中XMC1202T028X0032AAXUMA1 概覽
An ARM Cortex-M0 microcontroller is a compact 32-bit embedded-control component designed to execute firmware, monitor analog signals, and coordinate digital peripherals. Within the product hierarchy, this device belongs to the microcontroller, embedded processor, and semiconductor categories. Its combination of modest flash and SRAM capacity, mixed-signal peripherals, and industrial positioning makes it suitable for compact control nodes that do not require a high-performance application processor or a large memory footprint.
The principal features of the XMC1202T028X0032AAXUMA1 include a 32 MHz Cortex-M0 core, 32 KB flash, 16 KB SRAM, 20 I/O pins, and a 14-channel 12-bit ADC. Integrated serial interfaces support I2C, LIN, SPI, and UART/USART communication. Additional system functions identified in the product documentation include brown-out detection and reset, I2S, power-on reset, PWM, and a watchdog timer, enabling compact designs to handle analog measurement, communications, timing, and supervisory functions without separate discrete devices.
The XMC1000 family is manufactured using a 65 nm process and targets applications that need more capability than an 8-bit controller while keeping system complexity and memory requirements controlled. Firmware execution is handled by the ARM Cortex-M0 core, while the ADC, PWM, communication peripherals, watchdog, and reset functions support embedded acquisition and actuator-control designs. The 28-pin package also provides a practical footprint for medium-density industrial and embedded-control boards.
Typical uses include industrial sensor modules, LIN-connected automotive and building-control nodes, compact motor-control systems, communications equipment, and low-cost data-acquisition controllers. The I2C and SPI interfaces allow the MCU to connect sensors and external memory, while UART/USART and LIN support point-to-point or network communications. The 14-channel 12-bit ADC is particularly useful for monitoring multiple analog inputs in compact equipment.
A critical design consideration is analog-signal conditioning. The ADC input range, source impedance, acquisition time, reference-voltage stability, and grounding must be evaluated together, and the package power and ground pins should be connected with short, low-impedance PCB paths. Firmware must also configure the appropriate clock, reset, watchdog, and peripheral pins before normal operation.
This page combines manufacturer specifications, interface details, application guidance, and a verified same-package option into a compact engineering reference. It is intended to help designers evaluate memory, analog conversion, communications, package, and replacement requirements before beginning PCB layout or firmware development.
直接替換替代品,適用於 XMC1202T028X0032AAXUMA1 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XMC1202T028X0032AAXUMA1 (相同外形與佔位) — 差異在於 ADC Resolution, Flash Memory, Product Type.
XMC1202T028X0032ABXUMA1
✅ 直接替換聯絡詢價
查看資料表 →XMC1202T028X0032AAXUMA1 最大額定值與電氣特性
| Product Type | 32-bit industrial microcontroller |
| Processor Core | ARM Cortex-M0 |
| CPU Frequency | 32 MHz |
| Architecture | 32-bit |
| Core Count | 1 core |
| Flash Memory | 32 KB (32K x 8) |
| SRAM | 16 KB |
| GPIO Count | 20 I/O pins |
| ADC Resolution | 12-bit |
| ADC Channels | 14 channels |
| Serial Interfaces | I2C, LIN, SPI, and UART/USART |
| Additional Peripherals | Brown-out detection and reset, I2S, power-on reset, PWM, and watchdog timer |
| 封裝 | PG-TSSOP-28-16 |
| Manufacturing Process | 65 nm |
| Product Series | XMC1000 |
| RoHS 狀態 | Compliant |
| Lead-Free Status | Lead free |
XMC1202T028X0032AAXUMA1 pg-tssop-28-16 腳位配置指南
XMC1202T028X0032AAXUMA1(pg-tssop-28-16 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XMC1202T028X0032AAXUMA1.
請參閱 資料表 以查看完整腳位配置。
典型應用
XMC1202T028X0032AAXUMA1 適用於 6 應用s: Industrial Sensor Acquisition, LIN-Connected Control Node, Compact Motor and PWM Control, Building Automation Controller, Embedded Communications Module, Industrial Data Logger.
Industrial Sensor Acquisition
The XMC1202T028X0032AAXUMA1 suits compact sensor-hub designs because its 14-channel 12-bit ADC can monitor multiple analog inputs while the 32 MHz Cortex-M0 core performs filtering, calibration, and control. I2C and SPI provide flexible connections to sensors and external storage, while UART/USART supports host communication. The 32 KB flash and 16 KB SRAM are appropriate for focused acquisition logic. Board design must include careful reference grounding, input filtering, and signal paths that satisfy the ADC source-impedance and acquisition-time requirements.
推薦
LIN-Connected Control Node
The XMC1202T028X0032AAXUMA1 is appropriate for compact LIN nodes because LIN support is integrated alongside a 32 MHz Cortex-M0 core and 20 I/O pins. Firmware can coordinate actuator commands, digital inputs, PWM outputs, and diagnostic functions without an external communications controller. I2C and SPI remain available for local sensors, and the watchdog adds supervisory protection. Confirm the electrical requirements of the selected LIN transceiver and isolate its supply and signal routing appropriately from sensitive analog circuitry.
推薦
Compact Motor and PWM Control
The XMC1202T028X0032AAXUMA1 can serve as the supervisory controller in small motor or valve-control systems because PWM, multiple I/O, and serial communications are available around a deterministic 32 MHz Cortex-M0 core. A dedicated gate driver remains necessary for the power stage, while the MCU manages position or sensor inputs, current operating modes, and fault reporting. Brown-out detection and watchdog support improve robustness. Select external drive components and protection networks for the exact motor voltage, current, and switching environment.
推薦
Building Automation Controller
The XMC1202T028X0032AAXUMA1 fits small building-automation endpoints that combine environmental measurement with local actuator control. Its 14-channel 12-bit ADC supports analog sensor inputs, while I2C and SPI can connect digital sensors or expansion devices. UART/USART and LIN support supervisory communications, and PWM can control compatible valve or light functions. The 16 KB SRAM and 32 KB flash are suitable for lightweight protocols and control logic. Firmware should include watchdog servicing, brown-out behavior, and safe output states during communication loss.
推薦
Embedded Communications Module
The XMC1202T028X0032AAXUMA1 can manage a compact protocol-conversion or communications module because it supports UART/USART, I2C, and SPI on one 32-bit controller. The 32 MHz Cortex-M0 core can frame messages, supervise the watchdog, and maintain peripheral timing while 20 I/O pins handle indicators, configuration inputs, and handshake signals. Its 32 KB flash and 16 KB SRAM suit protocol stacks with moderate buffering requirements. Use low-impedance ground routing and disciplined clock and reset layouts to avoid communication errors.
推薦
Industrial Data Logger
The XMC1202T028X0032AAXUMA1 is well matched to a compact industrial data logger that records analog measurements and communicates results through UART/USART, LIN, I2C, or SPI. Fourteen 12-bit ADC channels provide parallel measurement capability, while the 32 MHz core handles buffering and formatting. PWM and GPIO support status and control signals, and brown-out detection supports safe recovery. Storage capacity, write endurance, data timestamps, and environmental limits must be evaluated against the logger's sampling rate and retention requirements.
推薦
推薦產品摘要
工程參考資料,適用於 XMC1202T028X0032AAXUMA1 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XMC1202T028X0032ABXUMA1 |
|---|---|---|
| Package | PG-TSSOP-28-16 | PG-TSSOP-28-16 |
| Brand | Infineon Technologies | Infineon Technologies |
| Processor Core | ARM Cortex-M0 | ARM Cortex-M0 |
| CPU Frequency | 32 MHz | 32 MHz |
| Flash Memory | 32 KB | 32 KB |
| SRAM | 16 KB | 16 KB |
主要差異化特點
- Matches the closest documented replacement in all listed core and memory ratings (對比XMC1202T028X0032ABXUMA1)
- Uses the same compact 28-pin control-package footprint (對比XMC1202T028X0032ABXUMA1)
- Combines digital control and analog acquisition in one device (對比XMC1202T028X0032ABXUMA1)
設計說明
Follow the Infineon PG-TSSOP-28-16 land-pattern and stencil drawing when defining the PCB footprint. Confirm pin-1 orientation, pad lengths, solder-mask openings, and the exposed copper treatment against the official package PDF before releasing Gerber files. Place decoupling capacitors close to the device power pins and connect ground returns directly to the corresponding ground pins with uninterrupted paths.
Treat analog inputs as precision signal paths: keep them away from PWM edges, clock lines, and switching-node copper; use short traces; and provide local reference and return paths. Verify the maximum source impedance for the selected sampling time with the ADC acquisition model. If a sensor output cannot meet that requirement, add a suitable buffer and include the buffer's offset, noise, settling time, and supply range in the error budget.
Do not infer every functional difference from the package and headline electrical specifications. For an AA-to-AB substitution, compare the exact manufacturer ordering codes, pin-description table, operating-temperature range, qualification markings, flash-programming limits, and errata documents. Preserve reset, brown-out, watchdog, and clock settings in the migration review, and regression-test communications and ADC behavior before production release.
合規資訊
The exact-device listing identifies RoHS compliance and lead-free construction. No exact-order-code AEC-Q100, REACH, halogen-free, or conflict-minerals declaration was identified.