AD53508JP - Dual-Channel 15.75V PMU IC | Analog Devices
MPN: AD53508JP ✓ ActiveAD53508JP Overview
A parametric measurement unit is a specialized interface IC that connects an automated test system with a device under test. Within the test-system hierarchy, it sits between the tester controller and the DUT pin, converting force commands into analog outputs and returning measured current or voltage as feedback. The AD53508JP therefore functions as an interface circuit, measurement circuit, and precision driver within automatic test equipment.
Two measurement channels allow a tester to control or monitor two DUT pins in parallel. The device supports direct measurement of higher currents, while integration provides low-noise, high-accuracy measurement for very small currents. Programmable operating modes let the same channel perform force-and-measure functions, integrate a current value, or hold a measured result, reducing the need for separate external instrumentation paths.
The AD53508JP includes remote force and sense capability, allowing the measurement function to operate at the tester pin rather than only at the instrument connection point. This arrangement helps compensate for voltage drops in force and sense wiring, improving measurement accuracy where long test leads, socket contacts, or tester-board routing create meaningful resistance.
Typical uses include semiconductor ATE pin-parameter characterization, parametric process monitoring, leakage-current tests, force-and-measure bias applications, and board-level semiconductor validation. The dual-channel architecture is particularly useful for parallel measurements and controlled power-delivery tests where each DUT pin requires independently programmed forcing and sensing.
The primary design consideration is low-noise force-and-measure performance. Keep force and sense routing separated, use a low-noise analog ground strategy, and follow the manufacturer’s recommended bypass and layout practices. Confirm pin functions and the 44-pin PLCC footprint against the AD53508 datasheet before making PCB or fixture assignments.
This product page combines the manufacturer’s device description with package details, sourcing guidance, application analysis, and a strict assessment of replacement options. It distinguishes electrically equivalent same-family variants from mere packaging references so engineers can make board-level replacement decisions without assuming that a similar-looking catalog entry is automatically drop-in compatible.
Drop-in alternatives for AD53508JP — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
AD53508JS
✅ Drop-In📋 Reference alternative (not in catalog)
AD53508JP Specifications
| Product Type | Dual-channel parametric measurement unit (PMU) interface IC |
| Number of Channels | 2 channels |
| Supply Voltage Range | 4.75 V to 15.75 V |
| Nominal Supply Voltage | 5 V |
| Package | 44-pin PLCC |
| Package Dimensions | 16.59 mm x 16.59 mm |
| Number of Terminals | 44 terminals |
| Lead Pitch | 1.27 mm |
| Terminal Form | J-lead |
| Package Shape | Square |
| Operating Temperature Range | +25°C to +70°C |
| Moisture Sensitivity Level | MSL 5 |
| Force Voltage and Measure Current | Supported programmable mode |
| Force Current and Measure Voltage | Supported programmable mode |
| Current Integration | Supported integration-and-hold mode |
| Remote Force and Sense | Supported |
| Higher-Current Measurement | Direct measurement supported |
| Very-Low-Current Measurement | Integration method for low noise and high accuracy |
| Mounting Type | Surface mount |
| RoHS Compliance | Unknown |
| REACH Compliance | Unknown |
AD53508JP square Pin Configuration Guide
Pin configuration for AD53508JP (square package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.
No detailed pinout data available for AD53508JP.
Refer to the datasheet for full pin configuration.
Typical Applications
AD53508JP is suitable for 6 applications: Semiconductor Automatic Test Equipment, Semiconductor Leakage-Current Testing, Parametric Process Monitoring, Power-Delivery Characterization, Board-Level Semiconductor Validation, Analog and Mixed-Signal IC Test.
Semiconductor Automatic Test Equipment
The AD53508JP fits semiconductor ATE pin-parameter modules because it combines two programmable PMU channels with voltage-force/current-measure and current-force/voltage-measure modes. Each channel can be assigned to a separate DUT pin, allowing a tester to bias and observe two nodes during one parametric test sequence. Its 4.75 V to 15.75 V supply range supports conventional 5 V tester backplanes. Remote force and sense improves accuracy at the tester pin by reducing the effect of drops across wiring, sockets, and load-board traces.
Recommended
Semiconductor Leakage-Current Testing
The AD53508JP is useful for leakage and low-current characterization because its programmable modes support integration for low-noise, high-accuracy measurement. A channel can integrate the current associated with a forced voltage and hold the resulting value for the test system, while higher-current conditions can use direct measurement. This dual approach lets one device cover a broader current range than a single measurement method. Settling time, integration interval, leakage floor, and fixture behavior should be characterized together for each resistance level.
Recommended
Parametric Process Monitoring
The AD53508JP can serve as the interface between a process-monitoring controller and a semiconductor structure under test. Programmable voltage or current forcing permits controlled bias conditions, while complementary current or voltage measurement observes the resulting response. Two channels enable simultaneous monitoring of related structures or sequential measurements without changing the force-and-measure architecture. The 44-pin PLCC format supports compact tester-channel layouts, but socket contact resistance and thermal conditions must be included when correlating results with process parameters.
Recommended
Power-Delivery Characterization
The AD53508JP is appropriate for characterizing voltage-drop and current-delivery behavior in semiconductor packages and boards. Its voltage-force/current-measure mode applies a defined bias and determines the current response, while current-force/voltage-measure mode supports complementary tests. Remote force and sense is particularly valuable when the intended measurement point is the DUT pin and resistive paths lie between the tester channel and that pin. Calibration should include fixture parasitics and establish which portion of the measured drop belongs to the device versus the test path.
Recommended
Board-Level Semiconductor Validation
The AD53508JP can support board-level validation by providing programmable parametric access to semiconductor pins under functional test conditions. A tester can force a voltage and observe current, force current and observe voltage, or integrate and hold a low-current result. The dual-channel organization allows two DUT pins to be controlled or monitored in parallel, reducing fixture duplication. Because the package uses J-leaded PLCC construction, designers should verify socket availability, contact repeatability, handling procedures, and whether production testing will use sockets or direct soldering.
Recommended
Analog and Mixed-Signal IC Test
The AD53508JP is relevant to parametric testing of analog and mixed-signal integrated circuits where individual pins require controlled bias and current observation. The voltage-force/current-measure mode can evaluate input impedance and bias-dependent current, while current-force/voltage-measure can support output-impedance and compliance measurements. Integrating a current measurement can improve the signal-to-noise ratio for small values. The tester software should account for channel settling, integration time, relay timing, and the remote force/sense path when establishing production measurement limits.
Recommended
Recommended Products Summary
Engineering reference data for AD53508JP — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | AD53508JS |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 44-pin PLCC | 44-pin PLCC |
| Product Type | Dual-channel parametric measurement unit | AD53508-family dual-channel parametric measurement device |
| Number of Channels | 2 channels | 2 channels |
| Supply Voltage Range | 4.75 V to 15.75 V | 4.75 V to 15.75 V |
| Voltage Force and Current Measure | Supported | Supported |
| Current Force and Voltage Measure | Supported | Supported |
| Current Integration and Hold | Supported | Supported |
| Remote Force and Sense | Supported | Supported |
Key Differentiators
- Two programmable channels in one PMU package (vs AD53508JS)
- Voltage and current force-measure modes in the same channel (vs AD53508JS)
- Remote force and sense accuracy support (vs AD53508JS)
Design Notes
Route force and sense conductors as separate paths from the AD53508JP to the DUT pin. Keep the sense return close to the force output and minimize shared copper resistance so remote force/sense can correct for voltage drops in the fixture and load board. Use a single ground reference for the analog measurement return, and inspect the manufacturer’s force-and-sense connection diagram before assigning tester connectors.
Do not treat the AD53508JP as a general-purpose precision ADC or regulator. Each channel is intended for programmed parametric force-and-measure operation, and the test software must coordinate the force value, measurement mode, integration interval, settling delay, and range. Allowing an unsupported state or measuring before the channel settles can create readings that reflect timing or overload behavior rather than the DUT.
The 44-pin PLCC package can conduct heat through its leads and socket contacts, but the tester fixture still determines the effective thermal environment. Keep forced current and dissipation within the manufacturer’s operating limits, verify socket contact resistance, and avoid placing the package adjacent to a high-temperature source without airflow. Monitor junction and board temperatures during long force-measure sequences rather than relying on ambient temperature alone.
Compliance Information
The AD53508 is an industrial test-equipment interface IC; no explicit automotive qualification is listed. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer’s compliance documentation.