C8051F508-IM - 50MHz 8051 MCU with 64KB Flash | Silicon Labs
MPN: C8051F508-IM ✓ ActiveC8051F508-IM Overview
An 8-bit microcontroller is a programmable semiconductor containing a CPU core, nonvolatile program memory, data memory, and peripheral interfaces on one integrated circuit. The C8051F50x family implements the enhanced 8051 architecture, while the C8051F508-IM adds communication and analog conversion resources needed for automotive electronics, industrial controls, and network-connected equipment. It belongs to the hierarchy of microcontrollers, embedded processors, and system-on-chip semiconductor devices.
The principal features of the C8051F508-IM include a 50 MHz core, 64 KB of Flash program memory, approximately 4.25 KB of RAM, a 12-bit ADC, and integrated CAN and LIN controllers. Its communication interfaces also include SPI, UART, and I2C, allowing the device to connect sensors, actuators, transceivers, and human-interface modules without requiring several separate interface devices.
The MCU is qualified and tested to AEC-Q100 requirements and supports an enhanced temperature range extending to 125 °C. This makes it suitable for automotive and industrial equipment exposed to elevated ambient temperatures. Its 40-QFN package includes an exposed pad, allowing heat to spread through the PCB and supporting reliable operation in compact assemblies. The C8051F50x family also provides pin-for-pin compatibility with related C8051F51x and C8051F58x/59x devices, which can simplify product variants and PCB reuse.
Typical uses include CAN or LIN body modules, industrial sensor hubs, motor-control supervisors, building-automation endpoints, and compact data-acquisition equipment. The CAN and LIN interfaces suit vehicle-network nodes, while the 12-bit ADC supports analog sensor conditioning. SPI and I2C provide access to external memory, transceivers, and digital sensors, and UART remains useful for diagnostics or configuration links.
PCB design should preserve the exposed-pad connection and manufacturer-recommended thermal-pad layout. Place decoupling capacitors close to the supply pins, route sensitive analog inputs away from fast-switching nodes, and follow the device's recommended pin-connection and termination guidance. Firmware should account for the 50 MHz operating rate, peripheral clock requirements, and the extended 125 °C temperature qualification.
This page combines the C8051F508-IM's principal electrical and package characteristics with application guidance, comparison data, and practical design notes. It helps engineers identify when the device's 50 MHz 8051 core, 64 KB Flash configuration, mixed-signal peripherals, AEC-Q100 qualification, and 40-QFN footprint fit a new embedded design.
Drop-in alternatives for C8051F508-IM — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
C8051F508-IMR
✅ Drop-In📋 Reference alternative (not in catalog)
C8051F588-IM
✅ Drop-In📋 Reference alternative (not in catalog)
C8051F589-IM
✅ Drop-In📋 Reference alternative (not in catalog)
C8051F510-IM
✅ Drop-In📋 Reference alternative (not in catalog)
C8051F511-IM
✅ Drop-In📋 Reference alternative (not in catalog)
C8051F508-IM Maximum Ratings & Electrical Characteristics
| Product Type | 8-bit automotive and industrial microcontroller |
| Core | Enhanced 8051 C8051 core |
| Maximum CPU Frequency | 50 MHz |
| Performance | 50 MIPS |
| Program Memory | 64 KB Flash (64K x 8) |
| Data RAM | 4.25 kB |
| ADC Resolution | 12 bit |
| Supply Voltage Range | 1.8 V to 5.25 V |
| Communication Interfaces | CAN, LIN, SPI, UART, and I2C |
| Package | 40-QFN (6 x 6 mm) |
| Exposed Pad | Present |
| Mounting Type | Surface mount |
| Automotive Qualification | AEC-Q100 qualified and tested |
| Maximum Operating Temperature | 125 °C |
| Series | C8051F50x |
| Instruction Set | 8051 |
| RoHS Status | Compliant |
| Packaging | Tape and reel ordering code |
| Manufacturer Family Pin Compatibility | Pin-for-pin compatible with C8051F51x and C8051F58x/59x series |
C8051F508-IM 40-qfn (6 x 6 mm) Pin Configuration Guide
Pin configuration for C8051F508-IM (40-qfn (6 x 6 mm) package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for C8051F508-IM.
Refer to the datasheet for full pin configuration.
Typical Applications
C8051F508-IM is suitable for 6 applications: Automotive CAN Sensor Node, LIN Body-Control Module, Industrial Sensor Hub, Motor-Control Supervisor, Building-Automation Endpoint, Data-Acquisition Controller.
Automotive CAN Sensor Node
The C8051F508-IM fits an automotive CAN sensor node because it combines a 50 MHz 8051 core, 4.25 KB of RAM, a 12-bit ADC, and an integrated CAN controller in one 40-QFN device. The MCU can sample analog sensors, apply calibration and filtering, and publish measurements over the vehicle network while keeping the circuit compact. Its AEC-Q100 qualification and operation to 125 °C support demanding automotive environments. A CAN transceiver is still required, and the PCB should use the manufacturer’s recommended power, decoupling, and exposed-pad layout. Firmware should also include network diagnostics, watchdog recovery, and fault reporting appropriate to the vehicle system.
Recommended
LIN Body-Control Module
The C8051F508-IM is appropriate for a LIN body-control or sensor module because it integrates LIN, CAN, UART, SPI, and I2C interfaces alongside 64 KB of Flash. LIN can connect distributed switches, seat sensors, and door modules, while CAN provides a higher-bandwidth path to vehicle controllers. The 50 MIPS processing capability supports protocol handling and application logic without relying on an external processor. Its 12-bit ADC supports analog sensing, while the extended 125 °C qualification fits elevated-temperature vehicle locations. The implementation needs an appropriate LIN transceiver, robust reverse-battery and transient protection, and careful grounding between communication and sensor circuits.
Recommended
Industrial Sensor Hub
The C8051F508-IM can serve as the controller in a compact industrial sensor hub that gathers analog measurements and coordinates wired communications. Its 12-bit ADC supports sensor inputs, while SPI and I2C permit connection to local memory, digital sensors, and interface converters. The 50 MHz core and 64 KB of Flash provide enough performance for acquisition, filtering, diagnostics, and protocol handling in an 8-bit embedded design. The MCU’s 1.8 V to 5.25 V supply range simplifies integration with mixed industrial voltage levels. For field reliability, include surge protection, watchdog handling, careful input filtering, and a robust exposed-pad thermal design on a multilayer PCB.
Recommended
Motor-Control Supervisor
The C8051F508-IM can act as a supervisory controller beside a motor-power stage, monitoring position, current, temperature, and system-health signals through its 12-bit ADC. Its 50 MHz execution speed supports fast control-loop participation and coordinated handling of CAN, LIN, UART, SPI, and I2C traffic. The 64 KB Flash capacity is useful for control algorithms, diagnostics, and configuration data, while 4.25 KB of RAM supports working state and communication buffers. The device does not replace a dedicated gate driver or power stage; it complements them by applying sequencing, protection, and fault-reporting logic. Keep high-current switching paths away from analog inputs and preserve low-impedance grounding.
Recommended
Building-Automation Endpoint
The C8051F508-IM suits a building-automation endpoint where several sensors and actuators must be coordinated within a constrained enclosure. I2C and SPI support local digital sensors, UART supports service diagnostics, and CAN or LIN can connect the endpoint to a wired building network. The 12-bit ADC handles environmental or occupancy-sensor inputs, while the 50 MHz core and 64 KB Flash accommodate control logic, data logging, and communication stacks. Its 40-QFN package helps reduce board area, and the 1.8 V to 5.25 V range supports multiple power architectures. Production designs should account for surge events, connector grounding, firmware update strategy, and the exposed-pad thermal requirements.
Recommended
Data-Acquisition Controller
The C8051F508-IM can control a compact data-acquisition system that measures analog inputs and transfers records through a local interface. Its 12-bit ADC, 4.25 KB of RAM, and 50 MIPS processing performance support sampling, scaling, filtering, and status management, while SPI can connect high-speed peripherals or external storage. UART and I2C provide straightforward configuration and service channels. The 40-QFN package permits compact instrumentation, and AEC-Q100 qualification with operation to 125 °C broadens its use in harsh environments. For accurate results, follow the analog-layout guidance, use short input paths, provide clean references, and separate sensitive measurement circuitry from digital and switching nodes.
Recommended
Recommended Products Summary
Engineering reference data for C8051F508-IM — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | C8051F508-IMR | C8051F588-IM | C8051F589-IM | C8051F510-IM | C8051F511-IM |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| CPU Core | 8051 | 8051 | 8051 | 8051 | 8051 | 8051 |
Key Differentiators
- Combines a 50 MHz 8051 core with 64 KB of Flash and a 12-bit ADC (vs C8051F510-IM)
- Integrates five communication interface types in one device (vs C8051F511-IM)
- Automotive qualification with an extended temperature range (vs C8051F508-IMR)
- Family-level PCB reuse across several Silicon Labs device series (vs C8051F588-IM)
Design Notes
Treat the exposed pad as a mandatory thermal and electrical connection rather than an optional area beneath the package. Follow the manufacturer's recommended land pattern and use a multilayer PCB with a continuous pad-connected copper plane where permitted by the pinout. Keep the return path under the device short and avoid placing thermal breaks beneath the exposed pad. For a compact automotive or industrial assembly, verify junction temperature under worst-case ambient temperature, 50 MHz operation, and maximum peripheral activity.
Place all required input, output, and bypass capacitors close to their associated C8051F508-IM pins, with the shortest possible ground connections. Route the 12-bit ADC inputs away from CAN, LIN, SPI, and clock-related switching nodes, and keep analog and digital return currents separated where practical. The 40-QFN footprint is compact, so assembly tolerances, exposed-pad solderability, and the manufacturer’s mask-stencil recommendations should be reviewed before releasing the PCB artwork.
Design the 1.8 V to 5.25 V supply rail so it remains stable under 50 MHz operation and during CAN or LIN transmit activity. Check every peripheral’s operating range independently, because a communication transceiver or sensor may require a different rail from the MCU. Avoid placing long return paths between the regulator ground and the MCU or analog circuitry. If the system supports power states, validate reset, clock-startup, and peripheral initialization behavior across every supply sequence.
Do not treat family-level pin compatibility as proof that firmware or peripheral behavior is identical. The C8051F50x family is described as pin-for-pin compatible with C8051F51x and C8051F58x/59x series devices, but program memory, RAM, clocks, peripheral sets, and qualification can differ. For the C8051F510-IM, for example, the documented Flash capacity is 32 KB rather than 64 KB. Compare the device-specific pin, memory, and peripheral tables before approving a substitution.
Compliance Information
Silicon Labs identifies the C8051F508-IM as auto-grade qualified and tested to AEC-Q100 with operation up to 125 °C. RoHS compliance is identified for the C8051F508-IM, while the remaining declarations are not specified in the product information and remain unknown.