C8051F717-GM - 25MHz 8051 MCU with 16KB Flash | Silicon Labs
MPN: C8051F717-GM ✓ ActiveC8051F717-GM Overview
A microcontroller is the central programmable component of an embedded system. It executes firmware, reads sensors, controls actuators, and manages communication between hardware peripherals. The C8051F71x family combines a CISC 8051 processor core with mixed-signal resources, allowing one device to perform digital control, analog measurement, and touch sensing without requiring separate components for every function. The C8051F717-GM therefore belongs to the embedded microcontroller and mixed-signal MCU hierarchy.
The principal device characteristics include a 25 MHz maximum clock, 25 MIPS processing capability, 16 KB of Flash program storage, and 512 bytes of RAM. Its 10-bit ADC supports analog measurements, while 18 capacitive-touch channels can detect finger or conductive-object proximity through external touch sensors. The 24-QFN package measures 4 x 4 mm, making it suitable for compact user-interface and industrial control products where board area is constrained.
The C8051F71x architecture integrates digital control and mixed-signal functions into a compact device. Flash memory retains programmed firmware without a separate external memory component, while the on-chip RAM supports working variables, stack operations, and intermediate processing. The ADC and capacitive-touch subsystem broaden the MCU’s role beyond conventional digital logic, reducing system complexity when a design includes analog sensing or touch controls.
Typical applications include capacitive-touch control panels, compact industrial controls, sensor-interface modules, building-control keypads, appliance interfaces, and embedded measurement instruments. The 3.3 V-oriented supply range, 24-pin footprint, and integrated sensing resources allow a designer to build compact products with fewer external components. Firmware should validate the touch-sensor excitation and acquisition settings for the intended electrode geometry and environment.
The principal design consideration is the exposed thermal pad beneath the QFN package. The pad must be connected to the ground plane with multiple vias and the surrounding copper kept as continuous as practical. Decoupling capacitors should be placed directly beside the supply pins, while analog and touch inputs should be routed away from switching nodes to reduce interference. Confirm the complete pin assignment and exposed-pad connection from the manufacturer datasheet before releasing the PCB layout.
This product summary combines the C8051F717-GM device specifications, package information, application context, and practical implementation guidance in a format designed to support component selection, schematic review, and compact embedded-system design.
Drop-in alternatives for C8051F717-GM — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
No drop-in alternatives available for this product.
Request AlternativesC8051F717-GM Maximum Ratings & Electrical Characteristics
| Processor Core | 8051 CISC, 8-bit |
| Maximum Clock Frequency | 25 MHz |
| Maximum Processing Performance | 25 MIPS |
| Flash Memory | 16 KB |
| RAM | 512 bytes |
| ADC Resolution | 10-bit |
| Capacitive-Touch Channels | 18 channels |
| Supply Voltage Range | 1.8 V to 3.6 V |
| Nominal Supply | 2.5 V or 3.3 V |
| Device Type | Mixed-Signal MCU |
| Series | C8051F71x |
| Package | 24-QFN, 4 x 4 mm |
| Pin Count | 24 pins |
| Exposed Pad | Present |
| Mounting Type | Surface mount |
| Shipping Package | Tube |
| Contact Plating | Tin |
| Factory Lead Time | 6 weeks |
C8051F717-GM tube Pin Configuration Guide
Pin configuration for C8051F717-GM (tube package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for C8051F717-GM.
Refer to the datasheet for full pin configuration.
Typical Applications
C8051F717-GM is suitable for 6 applications: Capacitive-Touch Control Panel, Industrial Sensor Interface, Appliance User Interface, Building-Control Keypad, Portable Measurement Instrument, Embedded Control Module.
Capacitive-Touch Control Panel
The C8051F717-GM fits a compact touch-control panel because its mixed-signal MCU provides 18 capacitive-touch channels alongside the 8051-compatible processing core. A designer can use the touch subsystem for keys, proximity sensing, or a small slider while retaining 16 KB of Flash for interface logic and 512 bytes of RAM for working state. The 24-QFN 4 x 4 mm package reduces board area, but the exposed pad must be connected to the ground plane and the touch electrodes routed away from noisy switching circuitry.
Recommended
Industrial Sensor Interface
The C8051F717-GM is suitable for an industrial sensor interface that must combine analog measurement with local control. Its 10-bit ADC can digitize sensor outputs, while the 25 MHz 8051-compatible core can process measurements and manage an embedded control routine. The 1.8 V to 3.6 V supply range supports low-voltage sensor systems, and 16 KB of Flash accommodates a focused firmware image. Layout should isolate analog inputs from digital clocks and provide local supply bypassing for predictable conversion performance.
Recommended
Appliance User Interface
The C8051F717-GM can control a compact appliance interface combining touch buttons, LED status indication, and sensor monitoring. Its 18 touch channels reduce the component count associated with separate capacitive-touch controllers, while the 10-bit ADC supports analog feedback from temperature or level sensors. The small 24-QFN package is valuable in space-constrained control boards. Firmware should debounce and calibrate each electrode, and the PCB should maintain controlled electrode spacing and ground geometry for stable touch performance.
Recommended
Building-Control Keypad
The C8051F717-GM fits a building-control keypad that needs local touch sensing, status feedback, and compact board construction. The 18 capacitive-touch channels support a multi-key front panel, while the 8051-compatible core executes application logic without requiring a higher-cost application processor. Its 25 MHz operating capability provides a responsive control platform for menu handling and communication tasks. The exposed pad and touch electrodes need careful PCB planning to preserve thermal performance, immunity, and consistent user experience.
Recommended
Portable Measurement Instrument
The C8051F717-GM can serve as the control element in a portable measurement instrument operating from a 1.8 V to 3.6 V supply. Its 10-bit ADC supports analog measurements, the 25 MHz core handles sampling and control logic, and the 16 KB Flash stores application firmware. The 24-QFN package assists miniaturization, although the exposed pad requires a thermal-via pattern and solid ground connection. Analog input routing, reference components, and supply bypass placement remain central to achieving repeatable measurements.
Recommended
Embedded Control Module
The C8051F717-GM is appropriate for a compact embedded-control module that must combine local processing, analog sensing, and touch-capable front-end inputs. The 512-byte RAM supports focused working sets, while 16 KB of Flash provides on-chip firmware storage. Its 8051-compatible architecture supports a broad embedded toolchain, and the 24-QFN footprint allows the module to remain compact. For reliable deployment, validate the firmware startup path, programming interface, watchdog behavior, and brownout conditions against the complete manufacturer documentation.
Recommended
Recommended Products Summary
Engineering reference data for C8051F717-GM — comparison, design guidance, and compliance information.
Selection Guide
Design Notes
Treat the exposed pad as the primary thermal and electrical connection to the ground plane. Follow the manufacturer land-pattern requirements and use a dense array of vias beneath the pad where permitted by the PCB process. Maintain uninterrupted ground copper around the package so heat can spread away from the die. Avoid placing temperature-sensitive analog components immediately beneath the device where its heat could alter measurement calibration.
Place the required supply-decoupling capacitor directly between the appropriate power and ground pins, with the shortest possible traces. Keep the QFN perimeter free of copper keepouts that violate the manufacturer’s recommended layout. The small 4 x 4 mm footprint can make assembly rework difficult, so inspect the land pattern and exposed-pad dimensions against the latest package drawing before fabrication release.
Route analog and capacitive-touch inputs away from clocks, relay drivers, switching regulators, and other high-edge-rate sources. Use a continuous ground reference beneath sensitive signals and avoid splitting the ground plane beneath the MCU unless a specific return-current requirement dictates otherwise. Configure acquisition timing and filtering for the actual electrode or sensor network, because nominal ADC resolution alone does not determine usable touch or measurement performance.
Do not treat a C8051F71x family member as interchangeable solely because it has a similar QFN outline. Firmware, memory map, peripheral allocation, package dimensions, pin multiplexing, and exposed-pad requirements can differ. Confirm the exact suffix, validate the complete pin table, and review the device errata before production. The GM and GMR ordering codes refer to shipment configurations rather than distinct functional designs.
Compliance Information
The available product information identifies tin contact plating but does not provide explicit RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals declarations.