DRV8837DSGR - 12V 1.8A H-Bridge Motor Driver | Texas Instruments
MPN: DRV8837DSGR ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
DRV8837DSGR Overview
An H-bridge motor driver is a power-management semiconductor that uses four MOSFET output switches to reverse current through a load and regulate its speed. The DRV8837 belongs to the motor-driver and power-management IC hierarchy, combining a control input stage, N-channel power MOSFETs, an H-bridge power stage, and integrated protection in one compact device. This makes it suitable for compact motion systems where a discrete MOSFET bridge would require more board area and additional protection circuitry.
The DRV8837DSGR provides a maximum drive current of 1.8 A and is identified as a 12 V H-bridge motor driver. Its PWM interface supports speed control, while the IN1-IN2 logic determines drive direction. Internal shutdown functions are specified for overcurrent protection, short-circuit protection, undervoltage lockout, and overtemperature conditions. The device is intended for low-voltage or battery-powered motion-control applications such as cameras, consumer products, toys, and other compact motorized equipment.
The WSON (DSG) package has 8 pins and is specified for surface mounting. Its compact package helps reduce PCB footprint, but thermal performance and exposed-pad layout remain important at sustained high motor current. The motor and wiring environment can introduce electrical noise, inductive transients, and large current loops, so power-loop layout, grounding, bulk capacitance, and protection must be designed together. The manufacturer product page and distributor records are the primary sources for current package, ordering, and lifecycle information.
Typical applications include small camera positioning mechanisms, battery-operated toys, consumer appliances, compact fan or pump controls, solenoid actuation, and low-voltage stepper-motor winding drives. For these applications, the DRV8837 provides bidirectional control and integrated fault handling, reducing the number of external power transistors and support components. The main design trade-off is that the motor's supply voltage, stall current, wiring inductance, and thermal conditions must remain within the device's verified operating limits.
This page combines verified Texas Instruments product information, distributor search results, package details, application guidance, and a strict drop-in alternative review. The DRV8837DSGR is listed with an 8-pin WSON DSG package and an operating temperature range of -40 to 85 in the verified product-page snippet. Confirm the complete electrical limits, pin functions, exposed-pad requirements, and protection behavior against the current manufacturer datasheet before releasing a production design.
Drop-in alternatives for DRV8837DSGR — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
DRV8837DSGT
✅ Drop-In📋 Reference alternative (not in catalog)
DRV8837CDSGR
✅ Drop-In📋 Reference alternative (not in catalog)
GC8837
✅ Drop-In📋 Reference alternative (not in catalog)
MAX14870
✅ Drop-In📋 Reference alternative (not in catalog)
L9110S
✅ Drop-In📋 Reference alternative (not in catalog)
DRV8837DSGR Maximum Ratings & Electrical Characteristics
| Device Type | Low-voltage H-bridge motor driver |
| Maximum Supply Voltage | 12 V |
| Maximum Drive Current | 1.8 A |
| Motor Type | Brushed DC motor or one winding of a stepper motor |
| Control Interface | PWM control through IN1 and IN2 |
| Output Stage | N-channel MOSFET H-bridge |
| Protection | Overcurrent, short-circuit, undervoltage lockout, and overtemperature shutdown |
| Package | 8-pin WSON (DSG), 2 mm x 2 mm |
| Mounting Type | Surface mount |
| Operating Temperature Range | -40 °C to 85 °C |
| Bidirectional Drive | Yes |
| Input Control | IN1-IN2 PWM interface |
| Load Capability | DC motor, stepper-motor winding, solenoid, or other load |
| Manufacturer | Texas Instruments |
| Product Family | DRV883x |
DRV8837DSGR 8-pin wson (dsg), 2 mm x 2 mm Pin Configuration Guide
Pin configuration for DRV8837DSGR (8-pin wson (dsg), 2 mm x 2 mm package). This power device features gate, drain, and source terminals. For non-polarized packages, refer to the manufacturer datasheet for exact pin 1 orientation and footprint details. Common applications include power supply design, motor driving, and load switching.
No detailed pinout data available for DRV8837DSGR.
Refer to the datasheet for full pin configuration.
Typical Applications
DRV8837DSGR is suitable for 6 applications: Battery-Powered Camera Positioning, Small Consumer Motor Control, Solenoid and Relay Actuation, Battery-Powered Toy Motion, Low-Voltage Stepper-Motor Winding, Compact Robotics and Sensor Actuators.
Battery-Powered Camera Positioning
The DRV8837DSGR fits compact camera positioning mechanisms that use a small brushed DC motor and a 12 V-class supply. Its 1.8 A maximum drive-current rating gives the designer a defined motor-drive ceiling, while the IN1-IN2 PWM interface supports direction and speed control. Place the driver close to the motor connector and local supply capacitance to reduce the high-current loop. The principal trade-off is that a camera mechanism must stay below the verified stall-current and thermal limits; the motor's mechanical load determines whether the available 1.8 A capability is sufficient.
Recommended
Small Consumer Motor Control
The Texas Instruments DRV8837DSGR is suitable for compact consumer mechanisms such as small fans, pumps, toys, and appliance accessories when the load is a low-voltage brushed DC motor. The integrated H-bridge reverses current for bidirectional motion and accepts PWM control through IN1 and IN2, reducing the need for a discrete transistor bridge. The design should include adequate bulk capacitance near the driver and a thermal path through the exposed pad. Verify the motor's startup and stall current because nominal operating current alone does not establish safe load capability.
Recommended
Solenoid and Relay Actuation
The DRV8837DSGR can drive solenoids and similar inductive loads in addition to brushed DC motors. Bidirectional H-bridge outputs allow current reversal or controlled drive behavior when the load requires it, and PWM inputs can regulate excitation. Because inductive switching creates voltage transients, the motor or solenoid wiring must be kept short where practical, local supply decoupling must be placed close to the driver, and protection must be checked against the load and wiring environment. The supplied data confirms integrated short-circuit and overcurrent shutdown functions but does not provide the detailed timing or threshold data required for final protection design.
Recommended
Battery-Powered Toy Motion
The DRV8837DSGR is aligned with the low-voltage, battery-powered motion systems described by Texas Instruments, including toys. Its 12 V and 1.8 A ratings can support small DC motor mechanisms while keeping the external control interface simple through IN1-IN2 PWM. Battery applications benefit from integrated protection, but designers should still account for motor stall current, supply droop, and the heat generated during repeated direction changes. A low-ESR local capacitor and short motor traces help the driver respond predictably as battery voltage varies.
Recommended
Low-Voltage Stepper-Motor Winding
The DRV8837DSGR can drive one winding of a stepper motor as identified in the verified product description. This makes it relevant to compact stepper mechanisms where only one winding must be driven at a time, or where a two-phase unipolar arrangement is acceptable. PWM control can regulate excitation, while the H-bridge provides current reversal capability. The motor's winding resistance, inductance, current rating, and switching strategy must be checked carefully; a driver rated for a nominal DC motor should not be assumed to meet every stepper-motion requirement without those calculations.
Recommended
Compact Robotics and Sensor Actuators
The DRV8837DSGR is applicable to compact robotics and sensor-driven actuator systems that use low-voltage motors or solenoids. The IN1-IN2 interface can be driven by a small microcontroller, allowing direction and PWM commands to be generated locally without a discrete power stage. Because motor wiring can inject noise into adjacent sensor circuits, separate noisy output routing from sensitive inputs, provide local return paths, and keep the exposed-pad thermal design continuous. The verified 12 V and 1.8 A rating makes the device more suitable for small mechanisms than larger industrial actuators.
Recommended
Recommended Products Summary
Engineering reference data for DRV8837DSGR — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | DRV8837DSGT | DRV8837CDSGR | GC8837 | MAX14870 |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | GigaDevice | Maxim Integrated |
Key Differentiators
- Integrated H-bridge control (vs MAX14870)
- Targeted low-voltage motion-control positioning (vs L9110S)
- Integrated fault-shutdown functions (vs GC8837)
- Verified application scope (vs DRV8837DSGT)
Design Notes
Place the DRV8837DSGR close to the motor output connector and route the H-bridge current loop with minimal area. Keep IN1 and IN2 traces away from motor nodes, and place local input and bulk capacitors close to the device power pins. The verified data identifies an 8-pin WSON DSG package, so the exposed-pad and thermal-via arrangement must follow the manufacturer land-pattern guidance. Do not infer the pinout from the package name alone; verify every pin against the current datasheet.
Estimate the driver dissipation from the motor-drive topology, motor current, supply voltage, and effective output duty cycle before selecting copper area. Estimated: the actual conduction loss depends on MOSFET on-resistance, which is not included in the supplied verified data, and the required calculation is therefore incomplete. Validate the design with the manufacturer thermal information and temperature-rise testing, especially for repeated starts, reversals, or sustained near-1.8 A operation.
Do not select the driver from nominal motor voltage alone. Check running current, startup current, stall current, battery droop, motor-wire inductance, and the DRV8837DSGR's complete absolute-maximum and recommended operating limits. The supplied verified snippets confirm 12 V and 1.8 A headline ratings, but they do not provide all threshold, timing, and thermal values. Also confirm that PWM polarity and IN1-IN2 truth-table behavior match the controller firmware.
Motor outputs are high-current, fast-switching nodes and can couple noise into sensors, audio, radio, or microcontroller signals. Route motor traces away from sensitive inputs, use a compact power return, connect decoupling capacitors at the driver, and consider common-mode filtering only after checking the motor's electrical characteristics and the driver's switching behavior. Verify EMC requirements with the final wiring, load, enclosure, and supply arrangement rather than relying only on IC specifications.
Compliance Information
The supplied verified product-page and search snippets do not explicitly state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status for DRV8837DSGR. Compliance fields are therefore marked unknown or not_applicable rather than assumed.
