ISO7762DBQR - 6-Ch 100Mbps Digital Isolator | TI
MPN: ISO7762DBQR ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $2.35 | $2.35 |
| 10 | $2.11 | $21.10 |
| 100 | $1.68 | $168.00 |
| 500 | $1.45 | $725.00 |
| 1,000 | $1.25 | $1,250.00 |
Drop-in alternatives for ISO7762DBQR — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
ISO7762FDBQR
✅ Drop-In📋 Reference alternative (not in catalog)
ISO7762DBQ
✅ Drop-In📋 Reference alternative (not in catalog)
ISO7742FDBQR
✅ Drop-In✓ In Stock
$2.1 / Unit
View Datasheet →ISO7741FDBQR
✅ Drop-In✓ In Stock
$1.42 / Unit
View Datasheet →ISO7762DBQR Maximum Ratings & Electrical Characteristics
| Number of Channels | 6 |
| Channel Configuration | 4/2 (4 forward, 2 reverse) |
| Isolation Rating | 3000 Vrms (per UL 1577) |
| Data Rate | 100 Mbps |
| CMTI (Common-Mode Transient Immunity) | ±100 kV/µs (typical) |
| Supply Voltage Range | 2.25 V to 5.5 V |
| Surge Capability | 12.8 kV |
| Projected Lifetime | >30 years |
| Package | 16-SSOP (DBQ), 0.154" width |
| Operating Temperature Range | -55°C to 125°C |
| Propagation Delay | [DATA_NEEDED: propagation delay] |
| Output Type | CMOS |
| Enable Pin | Yes |
| Fail-Safe Mode | Yes |
| Certifications | UL 1577, VDE, CSA, TUV, CQC |
| RoHS Status | Compliant |
ISO7762DBQR Pin Configuration
| Pin 1 | VCC1 — Supply voltage for side 1 |
| Pin 2 | GND1 — Ground for side 1 |
| Pin 3 | INA — Input channel A (side 1) |
| Pin 4 | INB — Input channel B (side 1) |
| Pin 5 | INC — Input channel C (side 1) |
| Pin 6 | OUTD — Output channel D (side 1) |
| Pin 7 | OUTE — Output channel E (side 1) |
| Pin 8 | OUTF — Output channel F (side 1) |
| Pin 9 | GND2 — Ground for side 2 |
| Pin 10 | VCC2 — Supply voltage for side 2 |
| Pin 11 | OUTA — Output channel A (side 2) |
| Pin 12 | OUTB — Output channel B (side 2) |
| Pin 13 | OUTC — Output channel C (side 2) |
| Pin 14 | IND — Input channel D (side 2) |
| Pin 15 | INE — Input channel E (side 2) |
| Pin 16 | INF — Input channel F (side 2) |
Safe Operating Area (SOA) & Thermal Characteristics
No official SOA curve available for this digital IC. Always operate within absolute maximum ratings specified in the datasheet. Ensure adequate cooling and derate as needed.
Typical Applications
ISO7762DBQR is suitable for 6 applications: Industrial Fieldbus Communication, Isolated SPI/UART Interface, Motor Control Feedback, Isolated Power Supply Monitoring, Medical Equipment Isolation, Automotive Electronics.
Industrial Fieldbus Communication
The ISO7762DBQR provides galvanic isolation for fieldbus interfaces such as PROFIBUS, Modbus, and CAN. Its 100 Mbps data rate and high CMTI of ±100 kV/µs ensure reliable data transmission in electrically noisy industrial environments. The 4/2 channel configuration supports bidirectional communication, making it ideal for isolated transceivers. With a 3000-VRMS isolation rating, it protects sensitive controllers from ground loops and voltage transients, enhancing system safety and reliability.
Recommended
Isolated SPI/UART Interface
The ISO7762DBQR is well-suited for isolating SPI or UART communication between microcontrollers and peripherals. Its 100 Mbps data rate easily handles SPI clock speeds, while the 4/2 channel configuration provides separate lines for MOSI, MISO, SCLK, and chip select. The wide supply range of 2.25V to 5.5V allows direct interfacing with various logic levels. The high CMTI ensures data integrity even with fast switching transients, making it ideal for motor drives and power converters.
Recommended
Motor Control Feedback
In motor control systems, the ISO7762DBQR isolates encoder and Hall sensor signals from the controller. Its high CMTI of ±100 kV/µs prevents false triggering from PWM-induced noise, while the 3000-VRMS isolation protects low-voltage logic from high-voltage transients. The 6-channel configuration can accommodate multiple feedback signals, reducing component count. The wide temperature range of -55°C to 125°C ensures reliable operation in demanding industrial environments.
Recommended
Isolated Power Supply Monitoring
The ISO7762DBQR can be used to isolate digital signals from power supply monitoring circuits, such as voltage and current sensors. Its high data rate and low propagation delay allow real-time monitoring of power parameters. The reinforced isolation rating ensures safe communication between the high-voltage side and the low-voltage controller. The device's low power consumption is beneficial for always-on monitoring applications, and its small SSOP package saves PCB space.
Recommended
Medical Equipment Isolation
The ISO7762DBQR provides galvanic isolation for patient-connected medical devices, ensuring safety and compliance with stringent standards. Its 3000-VRMS isolation rating and certifications (UL, VDE, CSA, TUV, CQC) meet medical safety requirements. The high CMTI and low emissions make it suitable for sensitive analog front-ends. The wide temperature range and robust construction ensure long-term reliability in critical healthcare applications.
Recommended
Automotive Electronics
The ISO7762DBQR is suitable for automotive applications such as battery management systems (BMS) and on-board chargers, where isolation is critical for safety. Its wide temperature range (-55°C to 125°C) and high CMTI ensure reliable operation in harsh automotive environments. The 100 Mbps data rate supports high-speed communication between isolated domains. The device's certifications and robust design make it a trusted choice for automotive-grade isolation.
Recommended
Recommended Products Summary
Engineering reference data for ISO7762DBQR — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | ISO7762FDBQR | ISO7762DBQ | ISO7742FDBQR | ISO7741FDBQR |
|---|---|---|---|---|---|
| Package | 16-SSOP (DBQ) | 16-SSOP (DBQ) | 16-SSOP (DBQ) | 16-SSOP (DBQ) | 16-SSOP (DBQ) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Number of Channels | 6 | 6 | 6 | 4 | 4 |
| Channel Configuration | 4/2 | 4/2 | 4/2 | 2/2 | 3/1 |
| Isolation Rating | 3000 Vrms | 3000 Vrms | 3000 Vrms | 3000 Vrms | 3000 Vrms |
| Data Rate | 100 Mbps | 100 Mbps | 100 Mbps | 100 Mbps | 100 Mbps |
| CMTI | ±100 kV/µs | ±100 kV/µs | ±100 kV/µs | ±100 kV/µs | ±100 kV/µs |
| Supply Voltage Range | 2.25V to 5.5V | 2.25V to 5.5V | 2.25V to 5.5V | 2.25V to 5.5V | 2.25V to 5.5V |
Key Differentiators
- 6-channel configuration with 4/2 directionality (vs ISO7742FDBQR)
- High CMTI of ±100 kV/µs (vs ISO7241MDW)
- Wide supply range of 2.25V to 5.5V (vs ISO7241MDW)
Design Notes
For optimal isolation performance, maintain at least 8 mm creepage and clearance distance between the input and output sides on the PCB. Place a 0.1 µF decoupling capacitor close to each VCC pin (VCC1 and VCC2) to minimize noise. Use a solid ground plane under the device, but ensure the isolation barrier is not bridged by any copper traces.
The ISO7762DBQR operates from 2.25V to 5.5V on both sides. Ensure that VCC1 and VCC2 are within the specified range and that the power supply can handle the total current consumption, which is typically a few milliamps per channel. Use low-ESR capacitors to maintain stable supply voltages, especially during high-speed switching.
Do not exceed the absolute maximum ratings, particularly the supply voltage and isolation voltage. Ensure that the input signals do not exceed the supply voltage. When using the enable pin, note that disabling the outputs may cause the fail-safe mode to activate, which could affect system behavior. Always refer to the datasheet for the exact fail-safe state.
Compliance Information
RoHS compliant per TI product page. Certifications include UL 1577, VDE, CSA, TUV, CQC.
