Texas Instruments

LM393LVQDRQ1 - Dual Open-Drain Comparator | Texas Instruments

MPN: LM393LVQDRQ1 ✓ Active
1.65 V to 5.5 V Vdss 5 nA typical Id 8-SOIC, 4.5 mm width Package
MOQ: 1 |

LM393LVQDRQ1 Overview

Texas Instruments LM393LVQDRQ1 is a dual, low-voltage, general-purpose comparator with two independent channels, open-drain outputs, and an 8-pin SOIC package. Its 1.65 V to 5.5 V supply range supports low-voltage systems, while its -40 °C to 125 °C operating-temperature range supports automotive and industrial environments. The device provides a maximum input offset voltage of 5 mV and typical input bias current of 5 nA. LM393LVQDRQ1 is the automotive-qualified LM393LV-Q1 family member in the 4.5 mm-wide 8-SOIC package.

A voltage comparator is an analog integrated circuit that compares two input voltages and produces a logic-level indication of their relationship. The LM393LV-Q1 family belongs to the comparator hierarchy within interface and signal-conditioning semiconductors. Unlike an operational amplifier intended primarily for linear amplification, this comparator is optimized for threshold detection, fault signaling, and logic-level translation. Its two channels operate independently, allowing one package to monitor two unrelated signals.

The open-drain output architecture is a defining electrical feature. Each output transistor can pull its output low, but it does not actively drive the output high; an external pull-up resistor supplies the high state. This arrangement permits the output voltage to match a system logic rail and allows multiple open-drain outputs to share a bus when their operating conditions permit. It is especially useful in wired-AND style signaling, battery-powered sensing, and systems that require an external pull-up for interface compatibility.

The maximum 5 mV input offset voltage and typical 5 nA input bias current support accurate threshold decisions with relatively little input imbalance or source-current error. The low-voltage operating range is appropriate for sensors, portable equipment, battery-powered controllers, and mixed-signal circuits using modern low-energy logic levels. Automotive qualification adds value where a wide operating-temperature range and controlled device quality are important, although the application must still satisfy all electrical limits.

Typical uses include battery-voltage monitoring, sensor-threshold detection, overvoltage and undervoltage protection, window comparators, and translating analog sensor signals into open-drain logic events. Two independent channels can also implement separate positive and negative thresholds, or monitor two rails in a compact control board. Because the output is open drain, the system designer must include a pull-up resistor and account for its load current, rise time, and bus capacitance.

Design the input network so that signals remain within the comparator's common-mode input range, and account for the 5 mV maximum offset when defining switching thresholds. Place the pull-up resistor close to the output when fast edges and low susceptibility to interference are required. Validate the complete trace, pull-up value, and attached load rather than evaluating only the unloaded comparator output.

This product page combines manufacturer device information, package-specific pin information, application engineering guidance, and clearly scoped replacement analysis. The comparison and selection sections emphasize electrical compatibility, qualification differences, and the design consequences of using an open-drain output rather than a push-pull output.

Drop-in alternatives for LM393LVQDRQ1 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with LM393LVQDRQ1 (same form factor and footprint) — differing in Comparator Type, Operating Temperature Range, Output Type, Package.

Texas Instruments
Comparator Type: Dual general-purpose voltage comparator
Operating Temperature Range: -40°C to +125°C
Output Type: Open drain
Compare with LM393LVQDRQ1 →

LM393LVQDR

✅ Drop-In
📦 8-SOIC, 4.5 mm width
Supply range remains 1.65 V to 5.5 V, but the Q1 automotive qualification designation is absent; functional channel and package differences are 0.

📋 Reference alternative (not in catalog)

LM393LVDR

✅ Drop-In
Texas Instruments
📦 8-SOIC
Dual general-purpose voltage comparator · 2 channels · 1.65 V to 5.5 V · Rail-to-rail · Open drain · 3000 uV · 0.1 mA · 600 ns

Contact for price

View Datasheet →

LMV393DR

✅ Drop-In
📦 8-SOIC
The 5 V-oriented low-voltage design raises the minimum supply requirement by 1.05 V versus 1.65 V, while retaining two open-drain comparator channels in 8-SOIC.

📋 Reference alternative (not in catalog)

LM393LVQDRQ1 Maximum Ratings & Electrical Characteristics

Comparator Type Dual, general-purpose voltage comparator
Number of Channels 2 channels
Supply Voltage Range 1.65 V to 5.5 V
Output Type Open-drain
Input Offset Voltage 5 mV maximum
Input Bias Current 5 nA typical
Operating Temperature Range -40 °C to 125 °C
Package 8-SOIC, 4.5 mm width
Pin Count 8 pins
Mounting Type Surface mount
Automotive Qualification Qualified automotive comparator

LM393LVQDRQ1 Pin Configuration

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 1OUT — Comparator 1 open-drain output
Pin 2 1IN− — Comparator 1 inverting input
Pin 3 1IN+ — Comparator 1 noninverting input
Pin 4 GND — Ground connection
Pin 5 2IN+ — Comparator 2 noninverting input
Pin 6 2IN− — Comparator 2 inverting input
Pin 7 2OUT — Comparator 2 open-drain output
Pin 8 VCC — Positive supply connection

Typical Applications

LM393LVQDRQ1 is suitable for 6 applications: Battery Voltage Monitoring, Sensor Threshold Detection, Automotive Power-Fault Signaling, Overvoltage and Undervoltage Protection, Window Comparator, Low-Voltage Logic Interface.

⚡

Battery Voltage Monitoring

The LM393LVQDRQ1 fits low-energy battery systems because its 1.65 V to 5.5 V supply range supports operation as the battery voltage approaches its lower operating region. The 5 mV maximum input offset voltage provides a defined accuracy limit when the device detects a critical battery threshold, while the open-drain output can directly pull an enable, warning, or power-path-control signal low. Use a resistor divider to scale the battery voltage into the input range, add an external pull-up on the output, and test threshold behavior across the intended battery temperature range.

🧩

Sensor Threshold Detection

The LM393LVQDRQ1 is suitable for detecting a sensor signal crossing a defined threshold in a compact embedded system. Its dual-channel architecture allows two related sensors or two thresholds to be monitored without duplicating the comparator package. The typical 5 nA input bias current limits input-loading impact in high-impedance sensor networks, and the 5 mV maximum offset defines the threshold uncertainty that must be included in the design margin. Place the resistor network close to the device and use the open-drain output with a defined pull-up voltage.

🚗

Automotive Power-Fault Signaling

The LM393LVQDRQ1 supports automotive power-fault monitoring because it combines a 1.65 V to 5.5 V operating range with a -40 °C to 125 °C temperature specification and Q1 family identification. Its open-drain output can participate in a low-side wired-AND fault bus, allowing multiple monitoring channels to indicate a fault without driving conflicting high states. The design must include a pull-up, logic-level compatibility checks, transient protection, and qualification review of all associated components. The comparator itself does not replace overvoltage or reverse-polarity protection stages.

🔧

Overvoltage and Undervoltage Protection

The LM393LVQDRQ1 can supervise a low-voltage power rail by comparing the divided rail voltage against a reference and generating an open-drain fault event. Two independent channels can implement separate upper and lower limits, which is useful in battery systems where both over-discharge and overcharge conditions require action. Use suitably precise divider resistors, allow for the 5 mV maximum offset, and choose a pull-up that remains compatible with the downstream logic. Testing must include line transients and the full temperature range rather than only nominal room-temperature conditions.

📊

Window Comparator

The two independent LM393LVQDRQ1 channels can be connected to implement a voltage window comparator, with one channel detecting the lower limit and the other detecting the upper limit. Open-drain outputs allow the two channels to share a pull-up when the desired result is a fault indication asserted only when either limit is crossed. The 1.65 V minimum supply voltage is useful in compact low-voltage systems, while the 5 mV maximum offset must be considered at both boundaries. Verify logic truth states carefully because tying open-drain outputs together requires compatible device behavior.

🌐

Low-Voltage Logic Interface

The LM393LVQDRQ1 can translate a low-voltage analog decision into an open-drain logic signal for a microcontroller, sensor hub, or mixed-signal controller. Because the output does not actively drive high, the external pull-up determines the high voltage and permits compatibility with a higher-voltage digital domain while the comparator operates from 1.65 V to 5.5 V. Keep the pull-up short to control rise time, account for output capacitance when selecting its resistance, and ensure that every attached signal remains within the comparator's common-mode input range.

Recommended Products Summary

LM393LVQDRQ1 Texas Instruments Used in: Battery Voltage Monitoring, Sensor Threshold Detection, Automotive Power-Fault Signaling, Overvoltage and Undervoltage Protection, Window Comparator, Low-Voltage Logic Interface LM393LV-Q1 Related automotive comparator family Used in: Battery Voltage Monitoring, Automotive Power-Fault Signaling, Low-Voltage Logic Interface LM339LV-Q1 Four-channel comparator family option Used in: Sensor Threshold Detection, Overvoltage and Undervoltage Protection TL331LV-Q1 Related low-voltage automotive comparator Used in: Automotive Power-Fault Signaling, Low-Voltage Logic Interface TL391LV-Q1 Related low-voltage dual comparator Used in: Window Comparator
What is the LM393LVQDRQ1?
The LM393LVQDRQ1 is a Texas Instruments dual, low-voltage, open-drain comparator in an 8-SOIC package. According to the manufacturer product information, it operates from 1.65 V to 5.5 V and contains two independent comparator channels. The Q1 family is identified for automotive applications, and the specified operating-temperature range is -40 °C to 125 °C. Each output uses an open-drain architecture and therefore requires an external pull-up resistor when a high output state is required.
Where can I download the LM393LVQDRQ1 datasheet PDF?
The official LM393LV-Q1 documentation is available through the Texas Instruments product page linked on this page. The manufacturer product page provides the datasheet, ordering information, quality details, and package documentation for the LM393LVQDRQ1. Use the LM393LV-Q1 family document because LM393LVQDRQ1 is an orderable member of that family. For implementation details, consult the manufacturer pin-description table, electrical-characteristics table, and typical-application diagrams.
Where can I find the LM393LVQDRQ1 pinout?
The LM393LVQDRQ1 uses an 8-SOIC pin arrangement: OUT1 is pin 1, IN1− is pin 2, IN1+ is pin 3, GND is pin 4, IN2+ is pin 5, IN2− is pin 6, OUT2 is pin 7, and VCC is pin 8. According to the manufacturer pin-description information, the two comparator sections are electrically independent. Keep each input within the device's common-mode limits and connect the pull-up network to the intended logic supply.
What are the key specifications of LM393LVQDRQ1 that engineers should know?
The key specifications are a 1.65 V to 5.5 V supply range, two independent comparator channels, open-drain outputs, 5 mV maximum input offset voltage, and 5 nA typical input bias current. The device is offered in an 8-SOIC package and operates from -40 °C to 125 °C. According to Texas Instruments product information, it is an automotive low-voltage comparator. These limits define the usable signal range, threshold accuracy, temperature range, and interface implementation.
Where can I buy LM393LVQDRQ1 online?
Use the Request a Quote form on this page to request LM393LVQDRQ1 availability, current lead time, and order details. The form is the appropriate channel for quote and order-on-request procurement, and it avoids stale pricing or inventory claims. The exact orderable MPN is LM393LVQDRQ1, so include the full suffix when requesting a quotation to distinguish it from other LM393LV-Q1 package and qualification options.
What is the price of LM393LVQDRQ1?
Submit the LM393LVQDRQ1 part number through the Request a Quote form on this page for a current quotation. No static price figure is stated because procurement prices can change with quantity, inventory, and market conditions. For production planning, include the annual usage, package preference, and requested delivery schedule in the request so the commercial response reflects the actual build program.
What is the lead time for LM393LVQDRQ1?
Request the current LM393LVQDRQ1 lead time through the Request a Quote form on this page. Lead time can vary with order volume, production planning, and current component availability, so it should be confirmed for the specific order rather than treated as a fixed catalog attribute. Provide the forecast quantity and required delivery date when requesting the quotation to obtain a schedule suitable for the assembly plan.
Is LM393LVQDRQ1 in stock?
Check current LM393LVQDRQ1 availability by submitting the part number in the Request a Quote form on this page. Inventory status is transactional and can change after data collection, so it should not be inferred from a product-page listing. The request should identify the required quantity, packaging method, and target delivery date so the response reflects the procurement request.
What is the difference between LM393LVQDRQ1 and LM393LVQDR?
The principal documented distinction is automotive qualification: LM393LVQDRQ1 belongs to the Q1 automotive family, while LM393LVQDR is the corresponding non-Q1 family designation. Both use the low-voltage dual-comparator architecture and are associated with the 8-SOIC package configuration. According to Texas Instruments family information, the Q1 designation identifies automotive qualification. Confirm ordering details and the complete suffix before treating the two versions as interchangeable.
LM393LVQDRQ1 vs LMV393DR - which is better for a 5 V design?
LM393LVQDRQ1 is preferable when the design needs the lower 1.65 V operating limit, automotive qualification, or the wider -40 °C to 125 °C range. LMV393DR is more closely oriented to 5 V operation and is identified in cross-reference information as a low-voltage drop-in option. Both use the open-drain dual-comparator concept, but input range, qualification, supply behavior, and exact ordering requirements must be checked before substitution.
When should I choose LM393LVQDRQ1 over LM393LVQDR?
Choose LM393LVQDRQ1 for an automotive design that specifically calls for the Q1-qualified device and an operating environment spanning -40 °C to 125 °C. Choose LM393LVQDR for non-automotive designs that do not require Q1 qualification. Because both devices use the same family architecture and 8-SOIC configuration, the decision should focus on qualification, supply requirements, operating temperature, and the exact manufacturer ordering information.
Is LM393LVQDRQ1 suitable for battery monitoring?
Yes, LM393LVQDRQ1 is well suited to battery monitoring because its 1.65 V minimum supply voltage supports low-voltage systems, while its 5 mV maximum input offset voltage helps define a switching threshold. The open-drain output can pull a low-power enable or fault signal low. Include a pull-up resistor, verify the battery and input voltages remain inside the common-mode range, and account for offset when sizing the threshold.
What can replace LM393LVQDRQ1?
LM393LVQDR is the closest same-family alternative because it retains the low-voltage dual-comparator architecture and 8-SOIC configuration, while differing principally in the documented Q1 automotive qualification. LMV393DR is another low-voltage open-drain option for 5 V-oriented designs. Neither should be substituted without checking supply limits, common-mode range, output current, temperature grade, qualification, and the exact pin-level requirements.
Can LMV393DR replace LM393LVQDRQ1?
LMV393DR can be considered for a 5 V-oriented circuit, but it is not an unconditional replacement for LM393LVQDRQ1. According to cross-reference information, the LMV393 is a low-voltage drop-in-family option, while the target supports operation from 1.65 V to 5.5 V and carries Q1 automotive identification. Confirm the precise input, output, timing, temperature, and qualification requirements before approving the substitution.
What is the best Texas Instruments equivalent for LM393LVQDRQ1?
Texas Instruments LM393LVQDR is the best same-family equivalent to evaluate when automotive Q1 qualification is not required. It retains the dual, low-voltage, open-drain architecture and the 8-SOIC package class. The meaningful distinction is qualification and application environment rather than a change in basic circuit function. Review the manufacturer ordering table and electrical limits for the exact suffix before replacing LM393LVQDRQ1 in an existing design.

Engineering reference data for LM393LVQDRQ1 — comparison, design guidance, and compliance information.

Selection Guide

Choose LM393LVQDRQ1 for an automotive or industrial design that needs two independent low-voltage threshold comparisons, a 1.65 V minimum supply, open-drain signaling, and operation across -40 °C to 125 °C. Select LM393LVQDR when the electrical architecture and package are suitable but Q1 automotive identification is unnecessary; it is the closest same-family option. LM393LVDR can also serve non-automotive applications, but its SOIC body width differs by 0.5 mm, so verify the mechanical footprint. Consider LMV393DR for a 5 V-oriented circuit, recognizing that its minimum supply is 1.05 V higher and it does not provide the target's documented automotive Q1 identity. For any substitution, verify common-mode input range, output sink current, timing, offset, bias current, temperature grade, pull-up arrangement, and qualification.

Comparison with Alternatives

Parameter This Product LM393LVQDR LM393LVDR LMV393DR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-SOIC, 4.5 mm width 8-SOIC, 4.5 mm width 8-SOIC 8-SOIC
Comparator Configuration Dual, independent channels Dual, independent channels Dual, independent channels Dual comparator
Supply Voltage Range 1.65 V to 5.5 V 1.65 V to 5.5 V 1.65 V to 5.5 V 2.7 V to 5.5 V
Output Type Open-drain Open-drain Open-drain Open-drain

Key Differentiators

  • Lower minimum supply voltage within the same TI low-voltage family (vs LMV393DR)
  • Automotive Q1 family identification (vs LM393LVQDR)
  • Dual independent open-drain channels in one package (vs TL331LV-Q1)

Design Notes

Do not treat an open-drain output as a push-pull logic output. The transistor actively pulls the output low but does not actively drive it high, so every output node requires a pull-up resistor unless another compatible open-drain device supplies the high state. Select the pull-up voltage for the downstream logic domain and check its current at the lowest output voltage. Misconnecting or omitting the pull-up can leave the output floating and produce undefined system behavior.

Account for the maximum 5 mV input offset voltage when defining a switching threshold, especially for battery or sensor monitoring where the measured value changes slowly. The 1.65 V to 5.5 V supply range does not by itself guarantee that every input is valid at every supply voltage. Verify both the input common-mode limits and output-level behavior from the manufacturer electrical-characteristics table. Add hysteresis where noise near the threshold could otherwise cause repeated output transitions.

Place the input divider and optional feedback resistors close to the relevant comparator pins to minimize coupling from adjacent switching nodes. Keep the open-drain output and pull-up resistor compact because long traces increase capacitance and slow the rising edge. Maintain a direct ground return for pin 4, and avoid routing sensitive input traces beside power inductors, motor-switching nodes, or high-current return paths. Confirm the final two-layer or multilayer layout against the manufacturer's application guidance.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

Texas Instruments identifies LM393LVQDRQ1 as an automotive Q1 low-voltage comparator. Detailed RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations should be confirmed in the current manufacturer product documentation.

Related Searches

lm393lvqdrq1 datasheet LM393LVQDRQ1 pinout LM393LVQDRQ1 datasheet pdf LM393LVQDRQ1 equivalent LM393LVQDRQ1 replacement LM393LVQDRQ1 cross reference LM393LVQDRQ1 price LM393LVQDRQ1 stock Texas Instruments LM393LVQDRQ1 LM393LVQDRQ1 8-SOIC pinout LM393LVQDRQ1 vs LMV393DR LM393LVQDRQ1 application circuit

Related Components & Terms

Texas Instruments LM393LVQDRQ1 LM393LV-Q1 LM393LVQDR LM393LVDR LMV393DR TL331LV-Q1 LM339LV-Q1 TL391LV-Q1 voltage comparator dual comparator open-drain output analog comparator IC interface IC semiconductor SOIC-8 8-SOIC package surface-mount package input offset voltage input bias current common-mode input voltage battery monitoring overvoltage protection undervoltage protection sensor threshold detection automotive electronics wired-AND output pull-up resistor
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details