MCF52210CVM80 - ColdFire V2 80MHz 64KB Flash MCU | NXP
MPN: MCF52210CVM80 ✗ End of Life| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $11.61 | $11.61 |
| 10 | $10.74 | $107.40 |
| 100 | $9.12 | $912.00 |
| 500 | $8.21 | $4,105.00 |
| 1,000 | $7.34 | $7,340.00 |
MCF52210CVM80 Overview
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and a rich set of peripherals into one package. The ColdFire V2 core is a variable-length RISC architecture derived from the original Motorola 68000 family, balancing code density with deterministic interrupt response, and sits within the broader taxonomy of 32-bit embedded microcontrollers used in industrial, consumer, and connectivity-enabled devices.
Key features of the MCF52210CVM80 include 64 KB Flash, 16 KB SRAM, USB OTG with physical layer, three UARTs, one SPI, two I2C, a 4-channel DMA, a 12-bit ADC and a fast Ethernet-friendly timer/counter block. The ColdFire V2 core delivers 76 MIPS (Dhrystone 2.1) at 80 MHz while consuming low active current, making it suitable for USB peripherals and tethered industrial nodes.
Architecturally, the device combines a unified memory map, integrated PLL, dedicated DMA for serial peripherals, and a USB OTG transceiver that supports both host and device roles without an external PHY. ColdFire toolchains (CodeWarrior, GCC for ColdFire, and GDB-aware debug probes) cover firmware development, while the BGA package supports high-density routing for space-constrained boards.
Typical applications include USB human-interface devices (HID), industrial USB-to-serial bridges, point-of-sale terminals, embedded barcode scanners, factory automation nodes, and consumer peripherals requiring USB host or device connectivity.
Design consideration: 81-ball MAPBGA (10x10 mm) requires X-ray or AOI inspection during assembly; thermal pad and inner-row balls must be soldered properly to avoid opens. Refer to the NXP MCF5221x reference manual for USB OTG host mode power and bus-resistor requirements.
This page synthesizes XAIPART distributor pricing, drop-in pin-compatible alternatives from the MCF522xx family and competitor MCUs, and practical design notes that go beyond the manufacturer datasheet summary.
Drop-in alternatives for MCF52210CVM80 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with MCF52210CVM80 (same form factor and footprint) — differing in DMA Channels, Mounting Type, Operating Temperature, Package, SRAM.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
MCF52211CVM80
✅ Drop-In📋 Reference alternative (not in catalog)
MCF52212CVM80
✅ Drop-In📋 Reference alternative (not in catalog)
MCF52213CVM80
✅ Drop-In📋 Reference alternative (not in catalog)
MCF5213LCVM80
✅ Drop-In✓ In Stock
$9.75 / Unit
View Datasheet →MCF5212LCVM80
✅ Drop-In✓ In Stock
$11.5 / Unit
View Datasheet →MCF52210CVM80 Maximum Ratings & Electrical Characteristics
| Core Architecture | ColdFire V2 (32-bit RISC, 68000-derived) |
| Maximum CPU Frequency | 80 MHz |
| Program Flash Memory | 64 KB (64K x 8) |
| SRAM | 16 KB |
| Supply Voltage | 3.0 V to 3.6 V (3.3 V typical) |
| Package | 81-MAPBGA (10x10 mm) |
| Mounting Type | Surface Mount (BGA) |
| USB Interface | USB On-The-Go (OTG) host/device with integrated PHY |
| UART Channels | 3 |
| SPI Channels | 1 |
| I2C Channels | 2 |
| DMA Channels | 4 |
| Operating Temperature | -40 C to +85 C (industrial) |
| RoHS Status | Compliant |
| Lead Free | Yes |
MCF52210CVM80 81-mapbga (10x10 mm) Pin Configuration Guide
Pin configuration for MCF52210CVM80 (81-mapbga (10x10 mm) package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for MCF52210CVM80.
Refer to the datasheet for full pin configuration.
Typical Applications
MCF52210CVM80 is suitable for 6 applications: USB Human-Interface Devices (HID), Industrial USB-to-Serial Bridge Gateways, Point-of-Sale (POS) Terminals, Embedded Barcode Scanners, Consumer USB Connectivity Devices, Factory Automation Sensor Nodes.
USB Human-Interface Devices (HID)
The MCF52210CVM80 is well suited to USB HID peripherals such as custom keyboards, pointer devices, game controllers and industrial input panels. Its integrated USB OTG controller with on-chip PHY removes the need for an external transceiver, shrinking BOM and PCB area. The ColdFire V2 core running at 80 MHz executes HID class drivers and report generation with deterministic timing, while three UARTs support auxiliary serial channels like keyboard-to-RS232 bridges or debug consoles. With 16 KB SRAM the part comfortably handles HID report buffers, while 64 KB Flash stores the USB stack and application logic.
Recommended
Industrial USB-to-Serial Bridge Gateways
The MCF52210CVM80 acts as a multi-port USB-to-UART/SPI/I2C bridge in industrial sensor networks and factory automation backbones. Its three UARTs, one SPI and two I2C buses can be exposed to a host PC as USB CDC or vendor-class composite devices, while the 4-channel DMA offloads serial transfers from the CPU. The ColdFire V2 core sustains 80 MHz operation under industrial -40 C to +85 C ambient ranges, and the integrated USB PHY simplifies isolation and EMC filtering. Engineers often pair the MCU with external RS-485 transceivers for long-cable industrial links.
Recommended
Point-of-Sale (POS) Terminals
POS terminals rely on deterministic USB connectivity for barcode scanners, mag-stripe readers and receipt printers - exactly the use case the MCF52210CVM80 was designed for. The integrated USB OTG supports both device mode (PC-tethered) and host mode (scanner/printer attached), with ColdFire V2 managing the class drivers and 64 KB Flash accommodating application logic plus USB stacks. The 16 KB SRAM buffers transaction data without external memory, while UARTs connect to legacy peripherals like cash-drawer kick-out relays. The 81-MAPBGA package fits the compact mainboards typical of slim POS terminals.
Recommended
Embedded Barcode Scanners
Handheld and fixed-mount barcode scanners benefit from the MCF52210CVM80's USB OTG, fast ColdFire V2 core and serial peripheral mix. Scanner imagers interface via SPI, while decoded data is streamed over USB HID or USB CDC to a host PC. The 80 MHz core executes image-decode algorithms and USB enumeration in real time, with 64 KB Flash holding decode libraries and 16 KB SRAM acting as the line-buffer workspace. The -40 C to +85 C industrial temperature range supports warehouse and cold-chain deployments where consumer-grade MCUs would struggle.
Recommended
Consumer USB Connectivity Devices
Consumer peripherals such as USB audio adapters, custom gamepads, MIDI controllers and home-automation bridges leverage the MCF52210CVM80's USB OTG and rich serial mix. The MCU appears as a USB device to a PC while simultaneously driving I2C sensors or SPI displays on the accessory side - a configuration supported by ColdFire V2's separate host/device OTG modes. With 64 KB Flash it accommodates application firmware plus USB class stacks, while 16 KB SRAM handles audio or sensor data buffers. The MAPBGA-81 footprint supports compact consumer enclosures.
Recommended
Factory Automation Sensor Nodes
The MCF52210CVM80 serves as the local controller in factory automation sensor nodes that aggregate I2C sensors, SPI ADCs and UART devices, then forward data over USB to a host PLC or industrial PC. The 4-channel DMA engine background-transfers sensor data without CPU intervention, while the ColdFire V2 core runs calibration, filtering and USB streaming in real time. The 64 KB Flash and 16 KB SRAM are sufficient for node firmware, and the -40 C to +85 C operating range covers typical industrial cabinet environments. Its NRND status means node designs should plan a migration path to Kinetis or LPC families.
Recommended
Recommended Products Summary
Engineering reference data for MCF52210CVM80 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | MCF52211CVM80 | MCF52212CVM80 | MCF52213CVM80 | MCF5213LCVM80 | MCF5212LCVM80 |
|---|---|---|---|---|---|---|
| Package | 81-MAPBGA (10x10 mm) | 81-MAPBGA (10x10 mm) - same | 81-MAPBGA (10x10 mm) - same | 81-MAPBGA (10x10 mm) - same | 81-MAPBGA (10x10 mm) - same | 81-MAPBGA (10x10 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | ColdFire V2 (32-bit) | ColdFire V2 (32-bit) | ColdFire V2 (32-bit) | ColdFire V2 (32-bit) | ColdFire V2 (32-bit) | ColdFire V2 (32-bit) |
| Max CPU Frequency | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| USB OTG | Yes (integrated PHY) | Yes | Yes | Yes | Yes | Yes |
| Ethernet MAC | No | No | No | No | Yes (integrated) | Yes (integrated) |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND | NRND |
Key Differentiators
- Integrated USB OTG with on-chip PHY (vs MCF5213LCVM80)
- Drop-in pin compatibility within MCF5221x family (vs MCF52211CVM80)
- ColdFire V2 ecosystem maturity (vs MCF5212LCVM80)
Design Notes
The 81-MAPBGA (10x10 mm) package requires X-ray or AOI inspection during assembly to verify inner-row solder joints. Use NSMD (non-solder mask defined) pads with a 0.4 mm pitch and a 0.5 mm ball diameter per NXP application note recommendations. A 4-layer PCB with a continuous ground plane beneath the BGA is mandatory for signal integrity and thermal dissipation on the ColdFire V2 bus; missing inner balls in production typically indicate insufficient paste volume or warped PCB.
The MCF52210CVM80 operates from a single 3.3 V rail (3.0-3.6 V). Decouple each VDD pin with a 100 nF ceramic capacitor placed within 2 mm of the ball, plus a bulk 4.7 uF tantalum or ceramic capacitor near the package. The USB OTG VBUS pin must see a 5 V input through a regulator; per the MCF5221x reference manual, do not back-power VBUS from the 3.3 V rail, or you will violate USB OTG host-mode specifications.
Do not attempt to program or debug the MCF52210CVM80 with a ColdFire V1-only toolchain - the V2 core requires a V2-aware compiler (CodeWarrior for ColdFire V2 or GCC for ColdFire with V2 backend). Mistakenly using V1 libraries will produce broken IVOR tables and silent peripheral-register writes that fail on V2. Also note that the NRND lifecycle status means stock is finite; place last-time-buy orders well before production ramp if no migration path is planned.
Compliance Information
RoHS and REACH compliance confirmed via NXP product page. AEC-Q100 is not applicable as the part is an industrial-grade MCU, not an automotive-qualified device. Lifecycle status is NRND per NXP official documentation.