MCF52210CVM80 - ColdFire V2 80MHz 64KB Flash MCU | NXP
부품 번호: MCF52210CVM80 ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $11.61 | $11.61 |
| 10 | $10.74 | $107.40 |
| 100 | $9.12 | $912.00 |
| 500 | $8.21 | $4,105.00 |
| 1,000 | $7.34 | $7,340.00 |
MCF52210CVM80 개요
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and a rich set of peripherals into one package. The ColdFire V2 core is a variable-length RISC architecture derived from the original Motorola 68000 family, balancing code density with deterministic interrupt response, and sits within the broader taxonomy of 32-bit embedded microcontrollers used in industrial, consumer, and connectivity-enabled devices.
Key features of the MCF52210CVM80 include 64 KB Flash, 16 KB SRAM, USB OTG with physical layer, three UARTs, one SPI, two I2C, a 4-channel DMA, a 12-bit ADC and a fast Ethernet-friendly timer/counter block. The ColdFire V2 core delivers 76 MIPS (Dhrystone 2.1) at 80 MHz while consuming low active current, making it suitable for USB peripherals and tethered industrial nodes.
Architecturally, the device combines a unified memory map, integrated PLL, dedicated DMA for serial peripherals, and a USB OTG transceiver that supports both host and device roles without an external PHY. ColdFire toolchains (CodeWarrior, GCC for ColdFire, and GDB-aware debug probes) cover firmware development, while the BGA package supports high-density routing for space-constrained boards.
Typical applications include USB human-interface devices (HID), industrial USB-to-serial bridges, point-of-sale terminals, embedded barcode scanners, factory automation nodes, and consumer peripherals requiring USB host or device connectivity.
Design consideration: 81-ball MAPBGA (10x10 mm) requires X-ray or AOI inspection during assembly; thermal pad and inner-row balls must be soldered properly to avoid opens. Refer to the NXP MCF5221x reference manual for USB OTG host mode power and bus-resistor requirements.
This page synthesizes XAIPART distributor pricing, drop-in pin-compatible alternatives from the MCF522xx family and competitor MCUs, and practical design notes that go beyond the manufacturer datasheet summary.
드롭인 대체품: MCF52210CVM80 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MCF52210CVM80 (동일 폼 팩터 및 풋프린트) — 차이점: DMA Channels, Mounting Type, Operating Temperature, Package, SRAM.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MCF52211CVM80
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MCF52212CVM80
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MCF52213CVM80
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MCF5213LCVM80
✅ 드롭인✓ 재고 있음
$9.75 / 개
데이터시트 보기 →MCF5212LCVM80
✅ 드롭인✓ 재고 있음
$11.5 / 개
데이터시트 보기 →MCF52210CVM80 최대 정격 & 전기적 특성
| Core Architecture | ColdFire V2 (32-bit RISC, 68000-derived) |
| Maximum CPU Frequency | 80 MHz |
| Program Flash Memory | 64 KB (64K x 8) |
| SRAM | 16 KB |
| 공급 전압 | 3.0 V to 3.6 V (3.3 V typical) |
| 패키지 | 81-MAPBGA (10x10 mm) |
| 실장 유형 | Surface Mount (BGA) |
| USB Interface | USB On-The-Go (OTG) host/device with integrated PHY |
| UART Channels | 3 |
| SPI Channels | 1 |
| I2C Channels | 2 |
| DMA Channels | 4 |
| 동작 온도 | -40 C to +85 C (industrial) |
| RoHS 상태 | Compliant |
| Lead Free | Yes |
MCF52210CVM80 81-mapbga (10x10 mm) 핀 구성 가이드
MCF52210CVM80(81-mapbga (10x10 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MCF52210CVM80.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MCF52210CVM80 적합 용도: 6 애플리케이션s: USB Human-Interface Devices (HID), Industrial USB-to-Serial Bridge Gateways, Point-of-Sale (POS) Terminals, Embedded Barcode Scanners, Consumer USB Connectivity Devices, Factory Automation Sensor Nodes.
USB Human-Interface Devices (HID)
The MCF52210CVM80 is well suited to USB HID peripherals such as custom keyboards, pointer devices, game controllers and industrial input panels. Its integrated USB OTG controller with on-chip PHY removes the need for an external transceiver, shrinking BOM and PCB area. The ColdFire V2 core running at 80 MHz executes HID class drivers and report generation with deterministic timing, while three UARTs support auxiliary serial channels like keyboard-to-RS232 bridges or debug consoles. With 16 KB SRAM the part comfortably handles HID report buffers, while 64 KB Flash stores the USB stack and application logic.
추천
Industrial USB-to-Serial Bridge Gateways
The MCF52210CVM80 acts as a multi-port USB-to-UART/SPI/I2C bridge in industrial sensor networks and factory automation backbones. Its three UARTs, one SPI and two I2C buses can be exposed to a host PC as USB CDC or vendor-class composite devices, while the 4-channel DMA offloads serial transfers from the CPU. The ColdFire V2 core sustains 80 MHz operation under industrial -40 C to +85 C ambient ranges, and the integrated USB PHY simplifies isolation and EMC filtering. Engineers often pair the MCU with external RS-485 transceivers for long-cable industrial links.
추천
Point-of-Sale (POS) Terminals
POS terminals rely on deterministic USB connectivity for barcode scanners, mag-stripe readers and receipt printers - exactly the use case the MCF52210CVM80 was designed for. The integrated USB OTG supports both device mode (PC-tethered) and host mode (scanner/printer attached), with ColdFire V2 managing the class drivers and 64 KB Flash accommodating application logic plus USB stacks. The 16 KB SRAM buffers transaction data without external memory, while UARTs connect to legacy peripherals like cash-drawer kick-out relays. The 81-MAPBGA package fits the compact mainboards typical of slim POS terminals.
추천
Embedded Barcode Scanners
Handheld and fixed-mount barcode scanners benefit from the MCF52210CVM80's USB OTG, fast ColdFire V2 core and serial peripheral mix. Scanner imagers interface via SPI, while decoded data is streamed over USB HID or USB CDC to a host PC. The 80 MHz core executes image-decode algorithms and USB enumeration in real time, with 64 KB Flash holding decode libraries and 16 KB SRAM acting as the line-buffer workspace. The -40 C to +85 C industrial temperature range supports warehouse and cold-chain deployments where consumer-grade MCUs would struggle.
추천
Consumer USB Connectivity Devices
Consumer peripherals such as USB audio adapters, custom gamepads, MIDI controllers and home-automation bridges leverage the MCF52210CVM80's USB OTG and rich serial mix. The MCU appears as a USB device to a PC while simultaneously driving I2C sensors or SPI displays on the accessory side - a configuration supported by ColdFire V2's separate host/device OTG modes. With 64 KB Flash it accommodates application firmware plus USB class stacks, while 16 KB SRAM handles audio or sensor data buffers. The MAPBGA-81 footprint supports compact consumer enclosures.
추천
Factory Automation Sensor Nodes
The MCF52210CVM80 serves as the local controller in factory automation sensor nodes that aggregate I2C sensors, SPI ADCs and UART devices, then forward data over USB to a host PLC or industrial PC. The 4-channel DMA engine background-transfers sensor data without CPU intervention, while the ColdFire V2 core runs calibration, filtering and USB streaming in real time. The 64 KB Flash and 16 KB SRAM are sufficient for node firmware, and the -40 C to +85 C operating range covers typical industrial cabinet environments. Its NRND status means node designs should plan a migration path to Kinetis or LPC families.
추천
추천 제품 요약
엔지니어링 참조 데이터: MCF52210CVM80 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MCF52211CVM80 | MCF52212CVM80 | MCF52213CVM80 | MCF5213LCVM80 | MCF5212LCVM80 |
|---|---|---|---|---|---|---|
| Package | 81-MAPBGA (10x10 mm) | 81-MAPBGA (10x10 mm) - same | 81-MAPBGA (10x10 mm) - same | 81-MAPBGA (10x10 mm) - same | 81-MAPBGA (10x10 mm) - same | 81-MAPBGA (10x10 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | ColdFire V2 (32-bit) | ColdFire V2 (32-bit) | ColdFire V2 (32-bit) | ColdFire V2 (32-bit) | ColdFire V2 (32-bit) | ColdFire V2 (32-bit) |
| Max CPU Frequency | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| USB OTG | Yes (integrated PHY) | Yes | Yes | Yes | Yes | Yes |
| Ethernet MAC | No | No | No | No | Yes (integrated) | Yes (integrated) |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND | NRND |
주요 차별점
- Integrated USB OTG with on-chip PHY (vs MCF5213LCVM80)
- Drop-in pin compatibility within MCF5221x family (vs MCF52211CVM80)
- ColdFire V2 ecosystem maturity (vs MCF5212LCVM80)
설계 노트
The 81-MAPBGA (10x10 mm) package requires X-ray or AOI inspection during assembly to verify inner-row solder joints. Use NSMD (non-solder mask defined) pads with a 0.4 mm pitch and a 0.5 mm ball diameter per NXP application note recommendations. A 4-layer PCB with a continuous ground plane beneath the BGA is mandatory for signal integrity and thermal dissipation on the ColdFire V2 bus; missing inner balls in production typically indicate insufficient paste volume or warped PCB.
The MCF52210CVM80 operates from a single 3.3 V rail (3.0-3.6 V). Decouple each VDD pin with a 100 nF ceramic capacitor placed within 2 mm of the ball, plus a bulk 4.7 uF tantalum or ceramic capacitor near the package. The USB OTG VBUS pin must see a 5 V input through a regulator; per the MCF5221x reference manual, do not back-power VBUS from the 3.3 V rail, or you will violate USB OTG host-mode specifications.
Do not attempt to program or debug the MCF52210CVM80 with a ColdFire V1-only toolchain - the V2 core requires a V2-aware compiler (CodeWarrior for ColdFire V2 or GCC for ColdFire with V2 backend). Mistakenly using V1 libraries will produce broken IVOR tables and silent peripheral-register writes that fail on V2. Also note that the NRND lifecycle status means stock is finite; place last-time-buy orders well before production ramp if no migration path is planned.
규정 준수 정보
RoHS and REACH compliance confirmed via NXP product page. AEC-Q100 is not applicable as the part is an industrial-grade MCU, not an automotive-qualified device. Lifecycle status is NRND per NXP official documentation.