MCIMX6G0DVM05AA - i.MX6UL ARM Cortex-A7 528MHz MPU | NXP
MPN: MCIMX6G0DVM05AA ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $16.5 | $16.50 |
| 10 | $14.85 | $148.50 |
| 100 | $13.2 | $1,320.00 |
| 500 | $11.55 | $5,775.00 |
| 1,000 | $10.3 | $10,300.00 |
MCIMX6G0DVM05AA Overview
An applications processor (AP) is a system-on-chip (SoC) class device that combines a CPU core, memory controllers, and a rich set of peripheral interfaces into a single IC, enabling compact and low-power designs for human-machine interfaces, connected devices, and industrial control systems. The i.MX 6UltraLite sits within NXP's i.MX 6 hierarchy as the entry-level variant optimized for low-power applications, below the dual-core i.MX 6DualLite and the higher-performance i.MX 6Quad families.
Key features include a 32-bit ARM Cortex-A7 core with NEON and FPU support, 32 KB instruction and 32 KB data L1 caches, 128 KB L2 cache, and integrated power management. The peripheral set includes two USB 2.0 controllers with PHY, two CAN-FD interfaces, multiple UART/SPI/I2C instances, and an LCD controller supporting up to WXGA resolutions. Hardware accelerators for cryptography (CAAM) and image processing (PXP) reduce CPU load for security and graphics tasks.
Architecturally, the device uses a Cortex-A7 single-core complex with a coherent system bus and an integrated L2 cache controller. The Cortex-A7 implements out-of-order issue with in-order pipeline for balanced performance and power. The SoC integrates wide I/O voltage tolerance and a flexible pin mux (IOMUXC) that allows nearly any peripheral function to be routed to most balls, simplifying board routing.
Typical applications include industrial human-machine interfaces (HMI), connected IoT gateways, building automation controllers, point-of-sale terminals, e-readers, smart appliances, and low-cost Linux-based IoT edge nodes. The combination of low power consumption, broad peripheral set, and mature Linux/FreeRTOS support makes it a common choice for brownfield industrial upgrades.
When designing with this MPU, allocate a generous PCB copper pour beneath the MAPBGA and follow NXP's AN4589 layout guidelines for high-speed signal integrity, DDR3L routing, and decoupling. Validate thermal performance under sustained CPU load since Cortex-A7 cores can draw significantly more current than the typical application note figures suggest.
This page consolidates distributor pricing, drop-in alternatives from the i.MX 6UltraLite family, and practical design notes that go beyond the manufacturer datasheet to help engineers select, source, and integrate this MPU into cost-sensitive Linux designs.
Drop-in alternatives for MCIMX6G0DVM05AA — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with MCIMX6G0DVM05AA (same form factor and footprint) — differing in L2 Cache, Package, Core Architecture, Mounting Type, RoHS Status.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
MCIMX6G2DVM05AA
✅ Drop-In✓ In Stock
$11.75 / Unit
View Datasheet →MCIMX6G3DVM05AA
✅ Drop-In✓ In Stock
$9.78 / Unit
View Datasheet →MCIMX6G2DVK05AA
✅ Drop-In✓ In Stock
$8.1 / Unit
View Datasheet →MCIMX6G1DVM05AA
✅ Drop-In📋 Reference alternative (not in catalog)
MCIMX6G0CVM05AA
✅ Drop-In📋 Reference alternative (not in catalog)
MCIMX6G0DVM05AA Maximum Ratings & Electrical Characteristics
| Series | i.MX 6UltraLite |
| Core Processor | ARM Cortex-A7 |
| Number of Cores | 1 |
| Data Bus Width | 32-bit |
| Maximum CPU Frequency | 528 MHz |
| Supply Voltage | 3.3 V |
| Package | 289-MAPBGA (14x14 mm) |
| Mounting Type | Surface Mount |
| Operating Temperature Range | -40C to +105C (industrial) |
| L1 Cache (I/D) | 32 KB / 32 KB |
| L2 Cache | 128 KB |
| USB Controllers | 2 x USB 2.0 with integrated PHY |
| CAN Interfaces | 2 x CAN-FD |
| LCD Controller | Yes, up to WXGA |
| RoHS Status | Compliant |
MCIMX6G0DVM05AA 289-mapbga (14x14 mm) Pin Configuration Guide
Pin configuration for MCIMX6G0DVM05AA (289-mapbga (14x14 mm) package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for MCIMX6G0DVM05AA.
Refer to the datasheet for full pin configuration.
Typical Applications
MCIMX6G0DVM05AA is suitable for 6 applications: Industrial Human-Machine Interface (HMI), IoT Edge Gateway and Connected Appliance, Point-of-Sale (POS) Terminal, Building Automation Controller, E-Reader and Low-Cost Consumer Electronics, Smart Appliance and White Goods Control.
Industrial Human-Machine Interface (HMI)
The MCIMX6G0DVM05AA's 528 MHz Cortex-A7 core runs Linux comfortably for touch-panel HMIs, while the integrated LCD controller supports resolutions up to WXGA with the PXP 2D accelerator handling screen compositing. The two CAN-FD interfaces connect directly to industrial fieldbus networks without external bridging chips. The -40C to +105C industrial temperature rating allows deployment inside sealed enclosures on factory floors. Place the MPU adjacent to LPDDR2 memory and follow NXP AN4589 routing guidelines for high-speed signal integrity.
Recommended
IoT Edge Gateway and Connected Appliance
The MCIMX6G0DVM05AA provides Linux-capable compute for IoT edge gateways while two integrated USB 2.0 PHYs connect Wi-Fi/Bluetooth or LoRa modules without external PHY chips. The two CAN-FD ports bridge to industrial sensors while UART/SPI/I2C instances connect peripheral radios. Low power consumption at idle makes the part attractive for always-on edge nodes. The integrated CAAM block accelerates TLS handshakes and AES payloads for MQTT/HTTPS traffic.
Recommended
Point-of-Sale (POS) Terminal
POS terminals benefit from the MCIMX6G0DVM05AA's combination of an LCD controller for the operator display, USB 2.0 for barcode scanners and receipt printers, and CAN-FD for EFT-POS peripherals. The 528 MHz Cortex-A7 runs standard Linux distros that support common payment middleware including EMVCo L1 stacks. The industrial temperature grade ensures reliable operation in semi-outdoor retail environments with fluctuating temperatures.
Recommended
Building Automation Controller
Building automation systems use the MCIMX6G0DVM05AA for centralized control of HVAC, lighting, and access systems, leveraging its CAN-FD interfaces for BACnet/Modbus gateway functions and USB ports for wired sensor hubs. The Cortex-A7 with hardware FPU handles control-loop math in real time. The wide operating temperature range supports installation in unconditioned mechanical rooms. The MAPBGA package footprint simplifies multi-protocol gateway designs.
Recommended
E-Reader and Low-Cost Consumer Electronics
E-readers and similar consumer devices benefit from the MCIMX6G0DVM05AA's low power consumption, integrated display controller for e-ink panels, and Linux compatibility that supports common e-reader frameworks. The Cortex-A7 single-core complex is sufficient for page rendering while remaining inexpensive at high volume. USB 2.0 ports connect to Wi-Fi modules and battery charging ICs. The cost-optimized G0 variant is preferred for the most price-sensitive consumer products.
Recommended
Smart Appliance and White Goods Control
Smart appliances including washers, ovens, and refrigerators use the MCIMX6G0DVM05AA as a touchscreen controller with CAN-FD connection to motor/inverter boards. The industrial temperature grade handles the heat of appliance interiors while Linux supports modern touch UIs. USB 2.0 connects Wi-Fi modules for cloud connectivity. The integrated LCD controller drives the main appliance display without external video bridge chips.
Recommended
Recommended Products Summary
Engineering reference data for MCIMX6G0DVM05AA — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | MCIMX6G2DVM05AA | MCIMX6G3DVM05AA | MCIMX6G2DVK05AA | MCIMX6G1DVM05AA | MCIMX6G0CVM05AA |
|---|---|---|---|---|---|---|
| Package | 289-MAPBGA (14x14) | 289-MAPBGA (14x14) - same | 289-MAPBGA (14x14) - same | 289-MAPBGA (14x14) - same | 289-MAPBGA (14x14) - same | 289-MAPBGA (14x14) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | ARM Cortex-A7 | ARM Cortex-A7 | ARM Cortex-A7 | ARM Cortex-A7 | ARM Cortex-A7 | ARM Cortex-A7 |
| Max Frequency | 528 MHz | 528 MHz | 528 MHz | 528 MHz | 528 MHz | 528 MHz |
| Feature Tier | G0 (lowest cost) | G2 (mid) | G3 (full) | G2 (mid) | G1 (entry+) | G0 (lowest cost) |
| Temperature Grade | Industrial (-40C to +105C) | Industrial | Industrial | Industrial | Industrial | Commercial (0C to +70C) |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
Key Differentiators
- Lowest-cost variant in the i.MX 6UltraLite family (vs MCIMX6G2DVM05AA)
- Drop-in compatibility with full i.MX6UL family (vs MCIMX6G0CVM05AA (commercial temp grade))
- Single-core Cortex-A7 for power-efficient Linux (vs Dual-core i.MX 6SoloLite alternatives)
Design Notes
The 289-MAPBGA package uses 0.8 mm ball pitch requiring micro-via PCB technology. Follow NXP application note AN4589 for high-speed DDR3L/LPDDR2 routing with matched impedance traces (50 ohm single-ended, 100 ohm differential). Place the MPU on the top layer adjacent to LPDDR2 memory with via-in-pad allowed beneath balls to escape the dense BGA.
Estimated: at 528 MHz full CPU load with typical industrial workloads, the Cortex-A7 core dissipates approximately 0.5-1 W. The MAPBGA package requires thermal vias beneath the die-expose region and at least a 4-layer PCB with continuous ground pour for adequate heat spreading. Junction temperature should be monitored via the on-chip thermal sensor at production test.
Do not omit the boot configuration resistors on the BOOT_MODE pins - incorrect boot mode settings can prevent the part from starting. The 32 kHz RTC crystal must be a low-ESR type with load capacitance matching the on-chip load capacitors. Decoupling capacitors must be placed as close as possible to each supply pin; missing decoupling can cause LPDDR2 initialization failures.
Use a dedicated PMIC such as the NXP PF3000 or PF3001 rather than discrete LDOs - the i.MX 6UltraLite requires precise power-up/power-down sequencing across multiple rails (3.3 V, 1.35 V core, 1.8 V DDR). The PMIC also handles the coin-cell RTC backup and provides early-failure warnings to the MPU via the PMIC_STBY_REQ pin.
Compliance Information
RoHS and REACH compliant per NXP product page. Not AEC-Q100 qualified; for automotive applications, refer to NXP's i.MX 6 automotive portfolio. Halogen-free status not explicitly confirmed in retrieved data.
