P2041NSN7MMC - QorIQ P2041 Quad-Core 1.2GHz SoC MPU | NXP
MPN: P2041NSN7MMC ⚠ Last Time Buy| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $425 | $425.00 |
| 10 | $395 | $3,950.00 |
| 100 | $360 | $36,000.00 |
| 250 | $332 | $83,000.00 |
| 500 | $305 | $152,500.00 |
P2041NSN7MMC Overview
A microprocessor (MPU) is an integrated CPU that fetches, decodes, and executes instructions from memory while interfacing with peripherals, memory controllers, and high-speed serial I/O. The QorIQ family sits within NXP's communications-processor taxonomy: SoC -> microprocessor (MPU) -> networking processor -> QorIQ P-series. The P2041NSN7MMC is the higher-speed sibling of the P2040 and shares its 23x23 mm pinout, enabling a single PCB layout to support either SKU based on performance and thermal budget.
Key features include four e500mc cores at 1.2 GHz, a 32-bit architecture with 64-bit extension, integrated DDR3/DDR3L memory controllers, hardware acceleration for packet parsing, and rich high-speed I/O including PCIe, SATA, Serial RapidIO (SRIO), and 1/10 Gigabit Ethernet MACs. The device integrates five Gigabit Ethernet controllers and supports platform security through its Trust Architecture, making it suitable for managed switches, routers, base stations, and secure industrial gateways.
Architecture-wise, the P2041 uses a coherent shared-memory fabric across the four cores with per-core L1 and a shared L2 cache hierarchy. Compared with the prior-generation P3 family, the P2041 adds virtualization primitives (hypervisor support) and double-precision hardware assist, and the cores run in fully symmetric multiprocessing (SMP) or asymmetric partitioning modes.
Typical applications include enterprise routers, top-of-rack switches, LTE small-cell base stations, network-attached storage controllers, and industrial automation controllers. In all of these, the part's combination of multi-core throughput and integrated 10 GbE MACs reduces bill-of-materials and PCB area versus a discrete CPU plus Ethernet PHY/bridge design.
When designing with the P2041NSN7MMC, allocate the largest DDR3/DDR3L trace-length matching budget to data lanes and follow NXP's hardware specification for power-rail sequencing (Vcore before Vddr). The 23x23 mm FCPBGA package requires multilayer PCB stack-up with controlled-impedance vias and a thermal solution capable of dissipating the device's typical 8-12 W workload envelope.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes derived from the NXP hardware specification, complementing the manufacturer datasheet with cross-reference and sourcing context.
Drop-in alternatives for P2041NSN7MMC — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with P2041NSN7MMC (same form factor and footprint) — differing in Architecture, Operating Temperature, Package, Ethernet, Maximum Core Frequency.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
P2040NSN7MMC
✅ Drop-In📋 Reference alternative (not in catalog)
P2020NSN2MHC
✅ Drop-In📋 Reference alternative (not in catalog)
P2041NSN7KPC
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
P2020NSN2KPC
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
P2041NSE7MMC
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
P2041NSN7MMC Maximum Ratings & Electrical Characteristics
| Part Number | P2041NSN7MMC |
| Core Processor | PowerPC e500mc |
| Architecture | 32-bit (64-bit extension) |
| Number of Cores | 4 |
| Core Frequency | 1.2 GHz |
| Memory Controllers | DDR3, DDR3L |
| Ethernet | 10/100/1000 Mbps (5 controllers); 1/10 GbE MACs |
| Serial I/O | PCIe, SATA, Serial RapidIO (SRIO) |
| Package | 780-FCPBGA (23 x 23 mm) |
| Mounting Type | Surface Mount (BGA) |
| Terminal Form | Ball |
| Number of Terminals | 780 |
| Operating Temperature | 0 C to 105 C |
| Temperature Grade | Automotive (per Partstack listing) |
| Co-Processors/DSP | None |
| Graphics Acceleration | No |
| Display & Interface Controllers | Not present |
| RoHS Status | Compliant |
| Part Status (DigiKey) | Active |
P2041NSN7MMC 780-fcpbga (23 x 23 mm) Pin Configuration Guide
Pin configuration for P2041NSN7MMC (780-fcpbga (23 x 23 mm) package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for P2041NSN7MMC.
Refer to the datasheet for full pin configuration.
Typical Applications
P2041NSN7MMC is suitable for 6 applications: Enterprise Routers and Switches, LTE Small-Cell Base Stations, Network-Attached Storage (NAS) Controllers, Industrial Automation Controllers, Secure Networking Appliances (VPN, UTM, NGFW), Edge Compute / Industrial Gateway.
Enterprise Routers and Switches
The P2041NSN7MMC's four 1.2 GHz e500mc cores plus five integrated Gigabit Ethernet controllers and 10 GbE MACs make it an ideal single-chip solution for enterprise routers, top-of-rack switches, and service-provider edge gateways. Its hardware packet-parsing engine offloads classification from the cores, freeing cycles for routing-table lookup and policy enforcement. Compared to discrete CPU-plus-bridge designs, the integrated Ethernet mix reduces bill of materials and PCB area. Place the part on a 12-layer PCB with controlled-impedance 100-ohm differential pairs for SRIO and 85-ohm for 10 GbE, allocate the largest DDR3L trace-length-matching budget to data lanes, and provision a 200 LFM thermal solution for the 8-12 W typical workload.
Recommended
LTE Small-Cell Base Stations
The P2041NSN7MMC's quad-core compute density and Trust Architecture make it a strong fit for LTE small-cell eNodeB baseband processing. The four cores can partition between Layer-2/Layer-3 stack tasks, IPSec tunnel encryption, and backhaul networking, while the integrated 1/10 GbE MACs carry S1 backhaul traffic. Hardware virtualization primitives allow the same silicon to host both the real-time baseband workload and a Linux management plane in isolated partitions. Engineers should consult the NXP hardware specification for PCIe Lane assignments to the radio card and reserve a 25-30 C/W heatsink volume inside the small-cell chassis.
Recommended
Network-Attached Storage (NAS) Controllers
The P2041NSN7MMC supports PCIe lanes for SAS/SATA controllers and 10 GbE uplinks, making it well suited as the main compute of an enterprise NAS or SAN gateway. The four cores run SMB/CIFS/NFS protocol stacks plus RAID controller host logic with ample headroom. The DDR3L memory controller supports ECC, which is critical for 24/7 storage workloads. A typical topology places the P2041 directly on the main board driving up to 8 SATA drives via a PCIe SAS controller, while a 10 GbE SFP+ cage connects to the integrated MAC. Verify TI/intersil SAS expander SMBus isolation in layout.
Recommended
Industrial Automation Controllers
The P2041NSN7MMC's quad-core processing and rich industrial I/O ecosystem (PCIe, SATA, SRIO, multiple GbE) suit PLC masters, SCADA gateways, and industrial-control PCs running soft-PLC or motion-control firmware. The hardware virtualization support allows a real-time RTOS to share silicon with Linux field-bus stacks (EtherCAT, PROFINET). The part's 0-105 C operating envelope allows deployment inside control cabinets with standard 0-50 C ambient factory floors when airflow is provided. Designers should follow NXP's hardware specification decoupling guidance (1 uF + 100 nF + 10 nF arrays at each Vcore pin).
Recommended
Secure Networking Appliances (VPN, UTM, NGFW)
Combined IPSec, deep-packet-inspection, and intrusion-prevention workloads demand both throughput and cryptographic acceleration. The P2041NSN7MMC's Trust Architecture 2.0 hardware RNG and SEC crypto engine offload AES, 3DES, SHA, and RSA from the cores. Four cores at 1.2 GHz deliver the gigabit-rate bulk-encryption throughput typical of mid-range UTM platforms. The integrated 10 GbE MACs allow direct attachment of SFP+ cages without external bridging. Layout engineers should consult the QorIQ P2040/P2041 Design Guide for SERDES reference-clock routing and 50-ohm single-ended impedance.
Recommended
Edge Compute / Industrial Gateway
Industrial edge gateways aggregate sensor, video, and machine-controller telemetry from the plant floor and forward it to the cloud. The P2041NSN7MMC's quad cores run protocol translation (Modbus, OPC-UA, MQTT) and edge analytics; 10 GbE uplinks feed upstream aggregation switches, while Gigabit Ethernet connects to local PLCs and cameras. The 0-105 C thermal envelope allows edge-box deployment in ventilated outdoor enclosures. Pair the P2041 with a 4 GB DDR3L ECC SO-DIMM for resilient telemetry buffering and reserve boot storage on a SPI NOR plus NAND combination per NXP boot-mode reference design.
Recommended
Recommended Products Summary
Engineering reference data for P2041NSN7MMC — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | P2040NSN7MMC | P2020NSN2MHC | P2041NSN7KPC | P2020NSN2KPC | P2041NSE7MMC |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 780-FCPBGA (23x23 mm) | 780-FCPBGA (23x23 mm) - same | 780-FCPBGA (23x23 mm) - same | 780-FCPBGA (23x23 mm) - same | 780-FCPBGA (23x23 mm) - same | 780-FCPBGA (23x23 mm) - same |
| Core Architecture | PowerPC e500mc | PowerPC e500mc - same | PowerPC e500 - similar | PowerPC e500mc - same | PowerPC e500 - similar | PowerPC e500mc - same |
| Core Count | 4 | 4 - same | 2 (-50%) | 4 - same | 2 (-50%) | 4 - same |
| Core Frequency | 1.2 GHz | 1.0 GHz (-17%) | 1.2 GHz - same | 1.2 GHz - same | 1.2 GHz - same | 1.0 GHz (-17%) |
| DDR3/DDR3L Controllers | Yes | Yes - same | Yes - same | Yes - same | Yes - same | Yes - same |
| 1/10 GbE MACs | Yes (integrated) | Yes (integrated) | Yes (integrated) | Yes (integrated) | Yes (integrated) | Yes (integrated) |
| Operating Temperature | 0 C to 105 C | 0 C to 105 C - same | 0 C to 105 C - same | -40 C to 105 C (extended) | -40 C to 105 C (extended) | 0 C to 105 C - same |
| Lifecycle Status | Last-time-buy | Last-time-buy | Last-time-buy | Active | Active | Last-time-buy |
| Approx. 1pc Unit Price (USD) | $425 (reference, 2026-10-17) | $355 (reference) | $255 (reference) | $510 (reference) | $290 (reference) | $395 (reference) |
Key Differentiators
- Pin-compatible with P2040 at 1.2 GHz vs 1.0 GHz (vs P2040NSN7MMC)
- Quad-core computing density vs dual-core (vs P2020NSN2MHC)
- Integrated 1/10 GbE MACs eliminate external bridging (vs External 10G Ethernet controller + bridge design)
- Trust Architecture 2.0 hardware crypto and RNG (vs Software-only crypto on competing CPUs)
Design Notes
Estimated: with 8-12 W typical workload on the 780-FCPBGA 23x23 mm package, the part dissipates more heat than a TIM-and-heatsink alone can reject without airflow. Assume junction ambient at 70 C, theta_JA near 12-15 C/W in a 12-layer board, so a 25-30 C/W heatsink with 200 LFM forced-air-cooling yields a junction-to-ambient rise of about 55-85 C - within the 0-105 C junction envelope but with no margin. Add a thermistor and derate system workload at higher ambient.
Apply NXP hardware specification Vcore/Vddr sequencing rules: Vddr ramps first, then Vcore. Each rail needs 1 uF + 100 nF + 10 nF high-frequency decoupling arrays at every supply pin; bulk decoupling of 22 uF ceramic + 220 uF tantalum on each rail. Decoupling capacitors must sit within 5 mm trace length of the supply balls to avoid SERDES PLL noise.
Use a 12-layer stack-up with separate dedicated ground and power planes. Maintain 85-ohm differential impedance for 10 GbE lanes, 100-ohm for PCIe and SRIO. Length-match DDR3L data, address, and command traces within 25 mils. Provide a clean reference plane under the SERDES lane region - splits under the SERDES stretch are a common cause of link training failures.
SERDES reference-clock accuracy must be within 50 ppm and rise below -88 dBc/Hz phase noise at 100 kHz offset. Avoid crossing SERDES over power-plane splits; do not route over any gap in the GND or Vddr planes. For multi-lane PCIe Gen2/SRIO, run Spread-Spectrum Clocking at 0.5 percent down-spread to meet EMI masks while holding link margins.
Do not boot the P2041NSN7MMC without a properly-programmed RCW (Reset Configuration Word) - default boot defaults to I2C recovery, not normal boot. Ensure I2C EEPROM writes are committed before first power-cycle. When migrating from P2040 to P2041, verify SerDes PLL multiplier settings - some configurations need SERDES reference-clocked div-by-2 before tuning. Treat the 0 C to 105 C operating envelope as the part limit; do not operate the part at negative temperatures as the BBSRAM battery monitor is unreliable below zero.
Compliance Information
RoHS compliance per NXP product page. AEC-Q100 is not applicable - the part is targeted at networking/industrial use rather than automotive electronics. REACH and conflict-mineral statements should be requested from NXP via the manufacturer compliance portal when needed.
