Texas Instruments

TUSB1106RTZR - USB 2.0 Half-Speed Transceiver | TI

MPN: TUSB1106RTZR ✓ Active
16-WQFN (RTZ), 3 x 3 mm Package 12 Mbit/s Speed
MOQ: 1 |

TUSB1106RTZR Overview

Texas Instruments TUSB1106RTZR is a half-speed USB 2.0 transceiver that transmits and receives serial data at both 12 Mbit/s full-speed and 1.5 Mbit/s low-speed rates. The device is packaged in a 16-pin WQFN (RTZ) 3 x 3 mm surface-mount package and includes an integrated bypassable 3.3 V regulator for powering devices from USB VBUS.

A USB transceiver is an interface IC that translates logic-level data between a host or hub and a USB peripheral. It belongs to the USB interface transceiver class within the broader interface IC and semiconductor hierarchy. This dual-rate capability allows one device to support both full-speed and low-speed USB links, making it useful in peripheral controllers, portable equipment, industrial interfaces, and legacy USB connectivity designs.

The TUSB1106 is compliant with the Universal Serial Bus Specification Revision 2.0. Its principal data-rate ratings are 12 Mbit/s for full-speed operation and 1.5 Mbit/s for low-speed operation. The integrated 3.3 V regulator can be bypassed, giving the system designer a choice between using VBUS-derived power and controlling the regulator enable function. The 16-WQFN package supports compact surface-mount layouts while providing an exposed pad for improved board-level thermal performance.

Operation at both USB speed rates expands compatibility with USB peripherals that use full-speed or low-speed signaling. The half-speed transceiver architecture implements one transmit path and one receive path, while the integrated regulator reduces the number of external power-management functions required around a USB peripheral. Designers must still account for USB data-line impedance, ESD protection, connector routing, and the regulator bypass configuration in the system schematic.

Typical uses include USB-to-serial bridges, embedded USB peripherals, portable data-acquisition equipment, industrial control interfaces, and USB connectivity for legacy full-speed or low-speed devices. The compact 3 x 3 mm package is particularly useful when board area is constrained but a full USB interface is required without relying on a larger host-side controller.

For PCB implementation, route D+ and D+ as a controlled-impedance differential pair, connect the data lines according to the manufacturer's reference layout, and place ESD protection close to the connector. Decouple the 3.3 V output according to the device's recommended capacitor network and verify whether the integrated regulator should be bypassed for the selected power architecture.

This product page combines the manufacturer's USB 2.0 compliance information, exact package and temperature details, commercial sourcing guidance, and an analysis of same-footprint alternatives to support faster component selection and PCB design.

Drop-in alternatives for TUSB1106RTZR — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with TUSB1106RTZR (same form factor and footprint) — differing in Package, Product Type.

Texas Instruments
Package: 16-pin VQFN
Product Type: Universal Serial Bus transceiver
Compare with TUSB1106RTZR →

TUSB1105RTZRG4

✅ Drop-In
📦 16-WQFN (3x3)
USB data-rate difference is 0 Mbit/s because both devices support 12 Mbit/s full-speed and 1.5 Mbit/s low-speed; pull-up and power-control functions require final pin-level verification

📋 Reference alternative (not in catalog)

TUSB1105RTZR

✅ Drop-In
📦 16-WQFN (3x3)
USB data-rate difference is 0 Mbit/s because both devices support 12 Mbit/s full-speed and 1.5 Mbit/s low-speed; pull-up and regulator-bypass behavior require final pin-level verification

📋 Reference alternative (not in catalog)

TUSB1105RGTR

✅ Drop-In
Texas Instruments
📦 16-WQFN (3x3)
Universal Serial Bus transceiver · Universal Serial Bus Specification Revision 2.0 · 1/1 half-duplex transceiver · 12 Mbit/s · 1.5 Mbit/s · 1 channel · 16-pin VQFN · 3 mm x 3 mm

Contact for price

View Datasheet →

TUSB1106RTZR Specifications

Product Type Half-speed USB 2.0 transceiver
USB Specification Compliance Universal Serial Bus Specification Revision 2.0
Full-Speed Data Rate 12 Mbit/s
Low-Speed Data Rate 1.5 Mbit/s
Transmit Paths 1
Receive Paths 1
Integrated Regulator 3.3 V bypassable voltage regulator
Regulator Power Source USB VBUS
Package 16-WQFN (RTZ), 3 x 3 mm
Pin Count 16 pins
Exposed Pad Present
Mounting Type Surface mount
Operating Temperature Range -40 °C to +85 °C

TUSB1106RTZR 16-wqfn (rtz), 3 x 3 mm Pin Configuration Guide

Pin configuration for TUSB1106RTZR (16-wqfn (rtz), 3 x 3 mm package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

16-wqfn (rtz), 3 x 3 mm package pinout diagram for TUSB1106RTZR

No detailed pinout data available for TUSB1106RTZR.

Refer to the datasheet for full pin configuration.

Typical Applications

TUSB1106RTZR is suitable for 6 applications: USB-to-Serial Peripheral Bridge, Industrial USB Control Interface, Portable USB Data Acquisition, USB Power-Management Interface, Legacy USB Peripheral Connectivity, USB Security and Access Device.

🔌

USB-to-Serial Peripheral Bridge

The TUSB1106RTZR fits a USB-to-serial bridge because it provides dedicated transmit and receive paths at both 12 Mbit/s full-speed and 1.5 Mbit/s low-speed rates. Place the transceiver between a host USB connector and a serial controller or bridge logic, using the integrated 3.3 V regulator when the downstream circuit can operate from USB VBUS. The dual-rate support broadens device compatibility without requiring separate full-speed and low-speed interface circuits. PCB implementation should preserve controlled-impedance D+ and D- routing and place connector ESD protection close to the external pins.

🏭

Industrial USB Control Interface

The TUSB1106RTZR is appropriate for an industrial controller that must interface with USB full-speed or low-speed service equipment. Its 12 Mbit/s and 1.5 Mbit/s operating modes provide a single interface for equipment using either USB rate, while the compact 3 x 3 mm WQFN footprint conserves board area. The bypassable 3.3 V regulator can simplify USB-powered operation, although an externally supplied rail may be preferable where the industrial system already regulates power. Follow the manufacturer's reference layout to keep the data pair away from switching nodes and high-current return paths.

📱

Portable USB Data Acquisition

The TUSB1106RTZR can connect a portable data-acquisition unit to a USB host at either full-speed 12 Mbit/s or low-speed 1.5 Mbit/s. Its one-transmit, one-receive architecture suits compact sensor and control equipment, while the small 16-WQFN package leaves more board area for analog circuitry. When operating from a battery-powered portable design, the integrated 3.3 V regulator may be bypassed if the host VBUS supply is unsuitable. Confirm the permitted power topology, output-capacitor requirements, and data-line protection strategy in the design.

⚡

USB Power-Management Interface

The TUSB1106RTZR is useful in USB peripherals that need both data communication and a 3.3 V auxiliary supply from VBUS. Its integrated regulator supports 3.3 V operation and can be bypassed when another valid source supplies the device, giving the designer flexibility in the power architecture. This is especially helpful in compact peripheral designs where adding a separate regulator would increase component count. Verify bypass-state behavior, startup sequencing, and decoupling values against the manufacturer data sheet before finalizing the circuit.

🖥️

Legacy USB Peripheral Connectivity

The TUSB1106RTZR supports peripherals that communicate at either 1.5 Mbit/s low-speed or 12 Mbit/s full-speed, making it suitable for legacy and mixed-speed USB equipment. A single device can therefore address both operating modes while retaining USB 2.0 compatibility. The WQFN package is compact, but the exposed pad and high-speed data routing still require careful PCB execution. Maintain a continuous reference plane under the pair, observe the recommended trace geometry, and place ESD protection at the connector rather than beside the transceiver.

🔐

USB Security and Access Device

The TUSB1106RTZR can serve as the USB interface in a compact access-control or security peripheral that enumerates as full-speed or low-speed equipment. Supporting both 12 Mbit/s and 1.5 Mbit/s rates permits compatibility with multiple host and peripheral configurations, while the integrated 3.3 V regulator may simplify VBUS-powered operation. Keep the USB pair isolated from noisy power-conversion stages and provide protection appropriate to the exposed connector environment. Review enable timing and bus-state behavior with the system firmware during startup and suspend transitions.

Recommended Products Summary

TUSB1105RTZR Same-family USB transceiver for a dual-rate bridge Used in: USB-to-Serial Peripheral Bridge, Portable USB Data Acquisition, Legacy USB Peripheral Connectivity TUSB1106RTZR Texas Instruments Used in: USB-to-Serial Peripheral Bridge, Industrial USB Control Interface, Portable USB Data Acquisition, USB Power-Management Interface, Legacy USB Peripheral Connectivity, USB Security and Access Device TUSB1105RTZRG4 Same-family transceiver option for compatible designs Used in: Industrial USB Control Interface, USB Power-Management Interface TUSB1105RGTR Texas Instruments Used in: USB Security and Access Device
What is the TUSB1106RTZR?
The TUSB1106RTZR is a Texas Instruments half-speed USB 2.0 transceiver that supports both 12 Mbit/s full-speed and 1.5 Mbit/s low-speed serial data. It uses one transmit path and one receive path and includes a bypassable 3.3 V regulator for USB VBUS-powered systems. According to the Texas Instruments TUSB1106 product page, the device complies with Universal Serial Bus Specification Revision 2.0.
What are the key specifications of TUSB1106RTZR?
The TUSB1106RTZR supports USB 2.0 full-speed operation at 12 Mbit/s and low-speed operation at 1.5 Mbit/s. It is a one-transmit, one-receive interface IC with an integrated bypassable 3.3 V regulator and a 16-WQFN RTZ package measuring 3 x 3 mm. The manufacturer's part-details listing specifies an operating temperature range of -40 °C to +85 °C.
Where can I download the TUSB1106RTZR datasheet PDF?
The official TUSB1106 datasheet and supporting documentation are available from the Texas Instruments product page at https://www.ti.com/product/TUSB1106. The same page provides the TUSB1106RTZR ordering and part-detail information, including the RTZ package, 16 pins, and -40 °C to +85 °C temperature range. Use the manufacturer's documentation for the definitive pin-description table and recommended application circuit.
Where can I find the TUSB1106RTZR pinout?
Use the pin-description table in the Texas Instruments TUSB1106 datasheet for the exact RTZ pin assignments and exposed-pad connection. The device uses a 16-WQFN 3 x 3 mm package, so its land pattern contains 16 numbered perimeter positions plus the exposed pad. Confirm pad geometry and thermal-via recommendations against the package drawing before releasing artwork.
What USB data rates does TUSB1106RTZR support?
The TUSB1106RTZR supports 12 Mbit/s full-speed and 1.5 Mbit/s low-speed USB operation. According to the Texas Instruments product description, both rates are handled by the same universal serial bus transceiver, which also complies with Universal Serial Bus Specification Revision 2.0. This dual-rate support allows the interface to connect with both full-speed and low-speed USB peripheral devices.
Does TUSB1106RTZR include a voltage regulator?
Yes. The TUSB1106RTZR integrates a bypassable 3.3 V regulator intended to power a USB device from USB VBUS. Bypass capability lets the system designer select whether the internal regulator participates in the power path or is bypassed for an alternative supply arrangement. The device data sheet should be used to confirm the enable state, external capacitors, and permitted power-source combinations.
What package does TUSB1106RTZR use?
The TUSB1106RTZR uses the 16-WQFN RTZ package with a 3 x 3 mm body. The exposed pad is part of the thermal and electrical layout and should be connected according to the Texas Instruments package drawing and recommended land pattern. The surface-mount format supports compact USB peripheral and bridge designs without through-hole assembly.
Is TUSB1106RTZR suitable for full-speed and low-speed USB peripherals?
The TUSB1106RTZR is suitable for peripherals operating at either 12 Mbit/s full-speed or 1.5 Mbit/s low-speed because it explicitly supports both rates. Its one-transmit, one-receive USB 2.0 interface also complies with Universal Serial Bus Specification Revision 2.0. Board-level USB signal routing, connector protection, and power sequencing still require application-specific verification.
What can replace TUSB1106RTZR?
TUSB1105RTZRG4 and TUSB1105RTZR are the closest same-footprint choices identified for the TUSB1106RTZR. Both retain the 16-WQFN 3 x 3 mm format, 12 Mbit/s full-speed capability, 1.5 Mbit/s low-speed capability, and USB 2.0 classification. Verify pull-up configuration, regulator bypass behavior, enable logic, and exposed-pad requirements in the specific replacement data sheet before approving a substitution.
Is TUSB1106RTZR the same as TUSB1105RTZR?
The TUSB1106RTZR and TUSB1105RTZR share the same principal USB 2.0 data-rate ratings and 16-WQFN RTZ footprint, but they are different family members. The rate difference is 0 Mbit/s because both support 12 Mbit/s full-speed and 1.5 Mbit/s low-speed operation. Their device-specific pull-up and power-control functions must still be checked against the respective manufacturer data sheets.
When should I choose TUSB1106RTZR over TUSB1105RTZR?
Choose the TUSB1106RTZR when the design specifically calls for its device-specific pull-up, regulator, or control configuration within a USB 2.0 peripheral. The USB data-rate difference from TUSB1105RTZR is 0 Mbit/s, since both support 12 Mbit/s and 1.5 Mbit/s. The decisive selection criteria are therefore pin-level function matching and the external power arrangement rather than signaling speed.
Is there a verified cross-brand drop-in equivalent for TUSB1106RTZR?
No verified cross-brand, same-package drop-in equivalent was identified for the TUSB1106RTZR. The TUSB1106RTZR uses a 16-WQFN RTZ 3 x 3 mm package with an exposed pad, so a similarly described USB transceiver is not automatically pin-compatible. Use the Texas Instruments cross-reference search and manufacturer pinout comparison before considering any cross-brand device, and avoid reworking the board footprint.
Where can I buy TUSB1106RTZR and check its availability?
Use the Request a Quote form on this page to ask about TUSB1106RTZR availability, current lead time, minimum order quantity, and the correct RTZ tape-and-reel configuration. The manufacturer identifies the part in the 16-pin RTZ package, while distributor catalog records show it as an orderable USB transceiver. The quote form provides a current sourcing answer without relying on an unverified stock indication.
What is the price of TUSB1106RTZR?
The current price and applicable quantity breaks for TUSB1106RTZR should be obtained through the Request a Quote form on this page. Because distributor prices and inventory can change rapidly, the structured commercial data on this page is designed to refresh dynamically. The requested part must retain the 16-WQFN RTZ package and tape-and-reel ordering code TUSB1106RTZR.
What is the lead time for TUSB1106RTZR?
Request the current lead time and minimum order quantity for TUSB1106RTZR through the Request a Quote form on this page. Lead time depends on the manufacturer's available inventory, production status, and the selected 16-WQFN RTZ tape-and-reel configuration. Texas Instruments lists the TUSB1106 family on its product and part-details pages, but those pages do not establish a shipment date for a specific order.

Engineering reference data for TUSB1106RTZR — comparison, design guidance, and compliance information.

Selection Guide

Choose the TUSB1106RTZR for a compact USB 2.0 peripheral that must operate at either 12 Mbit/s full-speed or 1.5 Mbit/s low-speed and benefits from an integrated bypassable 3.3 V regulator. TUSB1105RTZR, TUSB1105RTZRG4, and TUSB1105RGTR are same-footprint family options with matching supported rates, making them potential PCB-reuse candidates. Select one only after checking pull-up values, regulator-bypass behavior, enable polarity, and exposed-pad requirements against the exact data sheet. No cross-brand drop-in alternative is established by the available cross-reference material. For a cross-brand USB transceiver, treat it as a redesign unless its manufacturer explicitly confirms the same 16-WQFN RTZ land pattern, pin functions, data rates, and power configuration.

Comparison with Alternatives

Parameter This Product TUSB1105RTZRG4 TUSB1105RTZR TUSB1105RGTR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 16-WQFN (3x3) 16-WQFN (3x3) 16-WQFN (3x3) 16-WQFN (3x3)
Product Type Half-speed USB 2.0 transceiver Half-speed USB 2.0 transceiver Half-speed USB 2.0 transceiver Half-speed USB 2.0 transceiver
USB Specification USB 2.0 USB 2.0 USB 2.0 USB 2.0
Full-Speed Data Rate 12 Mbit/s 12 Mbit/s 12 Mbit/s 12 Mbit/s
Low-Speed Data Rate 1.5 Mbit/s 1.5 Mbit/s 1.5 Mbit/s 1.5 Mbit/s
Transmit and Receive Paths 1 transmit, 1 receive 1 transmit, 1 receive 1 transmit, 1 receive 1 transmit, 1 receive

Key Differentiators

  • Supports both principal USB half-speed operating rates (vs TUSB1105RTZR)
  • Combines USB data transfer with an integrated bypassable 3.3 V regulator (vs TUSB1105RTZRG4)
  • Compact exposed-pad package supports dense USB peripheral layouts (vs TUSB1105RGTR)

Design Notes

Route D+ and D- as a short, continuous differential pair using the geometry specified by the Texas Instruments TUSB1106 data sheet. Keep the pair over a continuous ground plane, minimize stubs and test-point breaks, and avoid routing it parallel to switching-node or high-current power traces. Place USB ESD protection beside the external connector so surge current is diverted before reaching the TUSB1106RTZR.

Select the regulator-bypass configuration early because it determines whether the TUSB1106RTZR's integrated 3.3 V regulator participates in the VBUS power path. Follow the manufacturer capacitor recommendations at the regulator output and verify startup behavior when the device transitions from bus-powered to externally powered operation. The exposed pad must be connected according to the package drawing and thermal-via guidance.

Do not treat a USB transceiver as interchangeable solely because its data rate and package dimensions match. Before substituting TUSB1105RTZRG4, TUSB1105RTZR, or TUSB1105RGTR, compare pull-up configuration, regulator-bypass logic, enable polarity, pin names, and exposed-pad requirements. Although the supported rate difference is 0 Mbit/s, a function-level difference can still prevent operation or alter bus-device detection.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

USB 2.0 compliance is confirmed by Texas Instruments. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statuses are not established by the referenced product and distributor information.

Data verified on: 2026-11-16 — data verified and curated by XAIPART's component engineering team

Related Searches

TUSB1106RTZR datasheet TUSB1106RTZR pinout TUSB1106RTZR datasheet pdf TUSB1106RTZR schematic TUSB1106RTZR equivalent TUSB1106RTZR replacement TUSB1106RTZR cross reference TUSB1106RTZR footprint TUSB1106RTZR spice model TUSB1106RTZR price TUSB1106RTZR stock Texas Instruments TUSB1106RTZR TUSB1106RTZR USB 2.0 transceiver TUSB1106RTZR vs TUSB1105RTZR

Related Components & Terms

Texas Instruments TUSB1106 TUSB1106RTZR TUSB1105RTZRG4 TUSB1105RTZR TUSB1105RGTR USB transceiver USB interface IC half-speed transceiver Universal Serial Bus Specification Revision 2.0 USB 2.0 12 Mbit/s 1.5 Mbit/s 3.3 V regulator USB VBUS 16-WQFN RTZ QFN package family surface-mount package exposed pad D+ and D- differential pair industrial USB control USB-to-serial bridge portable data acquisition legacy USB peripheral
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details