Microchip Technology

VSC7422XJQ-04 - 25-Port Gigabit Ethernet Switch | Microchip

MPN: VSC7422XJQ-04 ✓ Active
302-TQFP, 24 x 24 mm Package 1 Gb/s Speed
MOQ: 1 |

VSC7422XJQ-04 Overview

The Microchip Technology VSC7422XJQ-04 is a Layer 2 Gigabit Ethernet switch with 25 ports and 12 integrated copper PHYs, housed in a 302-TQFP package measuring 24 x 24 mm. It combines a 25-port managed switch with 12 integrated 10/100/1000Base-T copper PHYs in a single package, reducing the component count and board complexity of a multi-port Ethernet aggregation design. The device is positioned for telecom, industrial, and equipment-level networking applications that require multiple copper Ethernet ports on one controller.

An Ethernet switch is a Layer 2 network device that receives Ethernet frames on one port, examines the destination MAC address, and forwards traffic through the appropriate output port. A managed Layer 2 switch adds configuration, monitoring, and traffic-control functions that a basic unmanaged switch does not provide. The VSC7422 combines switching and copper physical-layer functions, allowing twelve copper links to share the same switching silicon while additional interfaces connect the device to upstream processors, PHYs, or network equipment.

According to the Microchip VSC7422 product page, the device is the industry's first fully integrated 25-port Gigabit Ethernet switch with 12 copper PHYs in one package. That integration is the defining feature: designers can use one switching IC for twelve copper ports and connect additional ports through external PHYs. Microchip also identifies the VSC8512 as a companion 12-port PHY, enabling a 25-port copper design with only two main ICs when that companion device is used for the remaining interfaces.

The VSC7422XJQ-04 is identified in distributor listings as a telecom Ethernet switch with a 302-TQFP package. The large lead count accommodates the integrated copper interfaces, control signals, power rails, and management connectivity in a single surface-mount device. Its footprint is materially larger than a typical low-port Ethernet controller, so PCB area, via density, thermal performance, and assembly capability should be considered before layout begins.

Typical deployments include telecom access equipment, industrial Ethernet gateways, network appliances, and managed copper switching platforms. The integrated copper PHYs reduce board-level PHY count, while the Layer 2 switching function consolidates multiple Ethernet links around a single control point. Compared with a board assembled from discrete switching and PHY devices, the integrated approach can shorten copper routing, simplify assembly, and reduce component-inventory complexity.

Design the power and thermal plan around the full 302-pin footprint rather than a small Ethernet controller land pattern. Follow the manufacturer layout guidance for high-speed copper pairs, provide clean supply rails and local decoupling, and validate the magnetics and connector interface for the target cable length and isolation requirements. Use the pin-description table and recommended schematic in the manufacturer datasheet when assigning every signal and supplying the exposed thermal and power connections.

This page consolidates the manufacturer architecture description, distributor package identification, drop-in replacement information, and board-level design guidance into one engineering-focused reference for the VSC7422XJQ-04.

Drop-in alternatives for VSC7422XJQ-04 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with VSC7422XJQ-04 (same form factor and footprint) — differing in Integrated Copper PHYs, Mounting Type, Package, Total Ports.

Microchip Technology
Integrated Copper PHYs: 12
Mounting Type: Surface Mount (SMT)
Package: 672-HSBGA, 27x27 mm
Compare with VSC7422XJQ-04 →

VSC7422XJG-04

✅ Drop-In
Microchip Technology
📦 302-TQFP (24 x 24 mm)
Ethernet Switch IC (Telecom IC) · Unmanaged Layer-2 · 25 · 12 · 10/100/1000 Mbps · 25 (SGMII/QSGMII/SerDes-capable) · Serial (SGMII, QSGMII, SerDes) · 1 V (core)

Contact for price

View Datasheet →

VSC7422XJQ-04 Maximum Ratings & Electrical Characteristics

Device Type Telecom Ethernet switch
Switching Layer Layer 2
Total Ports 25 ports
Integrated Copper PHYs 12 ports
Copper Interface Rate 10/100/1000Base-T
Ethernet Standard Gigabit Ethernet
Package 302-TQFP, 24 x 24 mm
Mounting Type Surface mount
Lead Count 302 leads
RoHS Status RoHS
Managed Switching Managed L2 switch
Companion PHY Microchip VSC8512 12-port copper PHY
Two-IC 25-Port Design Support Yes
Integrated PHY Count 12 copper PHYs
Maximum Ethernet Port Speed 1 Gb/s

VSC7422XJQ-04 302-tqfp, 24 x 24 mm Pin Configuration Guide

Pin configuration for VSC7422XJQ-04 (302-tqfp, 24 x 24 mm package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

302-tqfp, 24 x 24 mm package pinout diagram for VSC7422XJQ-04

No detailed pinout data available for VSC7422XJQ-04.

Refer to the datasheet for full pin configuration.

Typical Applications

VSC7422XJQ-04 is suitable for 6 applications: Telecom Access and Aggregation Equipment, Industrial Ethernet Gateway, Managed Network Appliance, Industrial Network Switch Platform, Multi-Port PoE Network Equipment, Carrier Ethernet Edge Device.

🌐

Telecom Access and Aggregation Equipment

The VSC7422XJQ-04 fits telecom access equipment that must consolidate multiple copper Ethernet services into a compact Layer 2 switching platform. Its 25-port architecture and 12 integrated copper PHYs reduce the number of external PHY devices needed beside the main switch. The 302-TQFP package still requires deliberate plane allocation and thermal planning because the switching and copper-interface functions are concentrated in one 24 x 24 mm device. Use the manufacturer reference layout for high-speed pair routing, grounding, and power decoupling.

🏭

Industrial Ethernet Gateway

The VSC7422XJQ-04 is suitable for an industrial Ethernet gateway that combines numerous copper ports with centralized Layer 2 forwarding. Twelve integrated PHYs shorten the path from connector magnetics to the switching fabric and can reduce board component count compared with a design built from separate PHY packages. For industrial equipment, verify the exact temperature grade and isolation design for the target enclosure. Follow the manufacturer layout guidance to keep copper links away from noisy switching and power-return paths.

🖥️

Managed Network Appliance

The VSC7422XJQ-04 supports high-port-count network appliances where an embedded controller must connect to multiple copper-facing line cards or service ports. Its managed Layer 2 switch handles frame forwarding while twelve integrated PHYs provide direct copper connectivity, allowing fewer switching and PHY devices to occupy the chassis controller. The large 302-TQFP footprint must be planned alongside processor, memory, and power circuitry. Use the manufacturer's recommended schematic and reference layout rather than treating the device as a small two-port Ethernet controller.

🔧

Industrial Network Switch Platform

The VSC7422XJQ-04 is a strong fit for an industrial Layer 2 switch platform requiring twelve immediately available copper ports and additional switched connectivity. Integrating the PHYs with the switch reduces board-level interconnect density and repetitive analog-interface routing, but the single 302-TQFP package also concentrates heat across a large die area. Provide multiple power planes, local high-frequency decoupling, and copper thermal area according to the manufacturer layout. Validate conducted emissions and thermal rise in the final enclosure rather than on an isolated laboratory board.

⚡

Multi-Port PoE Network Equipment

The VSC7422XJQ-04 can serve as the central Layer 2 switching device in multi-port network equipment that adds powered Ethernet capability through downstream power-management circuitry. The switch provides twelve integrated copper PHYs for direct endpoint connections, while additional switched interfaces remain available through external PHYs. Keep high-current power-conversion stages and magnetics physically separated from sensitive copper pairs, and follow the manufacturer recommendations for switching-node return currents. Confirm PoE voltage, current, isolation, and thermal requirements at the complete system level.

📡

Carrier Ethernet Edge Device

The VSC7422XJQ-04 matches carrier-edge equipment that needs numerous 10/100/1000Base-T service connections managed through a Layer 2 switch. Its 25-port structure supports dense copper aggregation, and the 12 integrated PHYs reduce the number of external devices compared with a modular switch design. Confirm telecom-grade temperature and qualification requirements for the exact ordering suffix before release. Follow the reference layout for differential pair geometry, return paths, and clock distribution to preserve signal integrity across all copper ports.

Recommended Products Summary

VSC8512XMK-14 Companion 12-port copper PHY for completing a 25-port design Used in: Telecom Access and Aggregation Equipment, Industrial Ethernet Gateway, Managed Network Appliance, Carrier Ethernet Edge Device KSZ8081RNACA Microchip Technology Used in: Industrial Ethernet Gateway LAN9313I-NZW-TR Microchip Technology Used in: Managed Network Appliance KSZ8041TLI-TR Microchip Technology Used in: Industrial Network Switch Platform, Multi-Port PoE Network Equipment KSZ8041RNL-TR Microchip Technology Used in: Industrial Network Switch Platform TPS62262DSGR Low-voltage power converter for auxiliary system rails Used in: Multi-Port PoE Network Equipment KSZ8895FMQTR Microchip Technology Used in: Carrier Ethernet Edge Device
What is the VSC7422XJQ-04?
The VSC7422XJQ-04 is a Microchip Technology Layer 2 Gigabit Ethernet switch with 25 total ports and 12 integrated copper PHYs. It is packaged as a 302-TQFP device measuring 24 x 24 mm. According to the Microchip VSC7422 product page, integrating twelve copper PHYs with the switching silicon allows a 25-port design to be completed with the VSC7422 and a companion VSC8512 12-port PHY.
How many ports does the VSC7422XJQ-04 have?
The VSC7422XJQ-04 provides 25 Ethernet ports, of which 12 are connected directly to integrated copper PHYs. The additional port count is implemented through external PHY connectivity, including the Microchip VSC8512 companion PHY. The Mouser product listing describes the device as a 25-port Layer 2 switch with 12 integrated copper PHYs, while the manufacturer page confirms the 25-port, 12-copper-PHY architecture.
What is the package size of VSC7422XJQ-04?
The VSC7422XJQ-04 uses a 302-lead TQFP package measuring 24 x 24 mm. DigiKey describes it as a 302-TQFP Ethernet switch, and JLCPCB identifies the same package as FSTQFP-302 at 24 x 24 mm. The large lead count reflects the integrated copper interfaces and control connections, so the PCB footprint requires substantially more routing space than a small Ethernet transceiver package.
Where can I download the VSC7422XJQ-04 datasheet PDF?
Start with the official Microchip VSC7422 product page at https://www.microchip.com/en-us/product/VSC7422, where the manufacturer datasheet and product documentation are published. The VSC7422XJQ-04 ordering information appears on distributor listing pages, but the Microchip document is the authoritative source for the pin description, recommended application schematic, electrical characteristics, and layout instructions.
What is the VSC7422XJQ-04 pinout?
The VSC7422XJQ-04 uses a 302-pin TQFP footprint, so its pinout cannot be represented accurately by a short pin list. Use the pin-description table in the manufacturer VSC7422 datasheet to map each of the 302 numbered leads, including the copper PHY interfaces, management signals, clock sources, supplies, grounds, and test points. Preserve the manufacturer's ball-by-ball or lead-by-lead land pattern rather than substituting a generic 302-pin symbol.
Can the VSC7422XJG-04 replace the VSC7422XJQ-04?
The VSC7422XJG-04 is the closest documented alternative because it is also a 25-port unmanaged Layer 2 switch with 12 integrated copper PHYs. Its listing identifies an industrial-temperature version, while the target ordering code is qualified for telecom. Verify the exact temperature grade, production status, pin functions, and package dimensions against the manufacturer datasheet before treating it as a drop-in replacement.
What is the best drop-in replacement for the VSC7422XJQ-04?
The best documented drop-in candidate is the Microchip VSC7422XJG-04 because it retains the 25-port switching architecture, 12 integrated copper PHYs, and the same 302-TQFP device format. The meaningful difference is the temperature-grade designation: the XJG-04 is identified as an industrial-temperature version. Confirm the full pin list, electrical limits, and qualification requirements in the manufacturer datasheet before production substitution.
VSC7422XJQ-04 vs VSC7422XJG-04: which is better for industrial equipment?
The VSC7422XJG-04 is the better-supported starting point for industrial equipment because its distributor listing explicitly identifies an industrial-temperature version. Both devices provide the same fundamental 25-port Layer 2 switch architecture with 12 integrated copper PHYs in a 302-TQFP package. The final choice depends on the required temperature range, lifecycle status, and any telecom-specific qualification attached to the XJQ-04 ordering code.
What is the difference between the VSC7422XJQ-04 and a discrete Ethernet switch design?
The VSC7422XJQ-04 integrates twelve copper PHYs into the same package as a 25-port Layer 2 switch, reducing the number of separate PHY and switching devices. A discrete design needs additional PHY packages, copper routing, power distribution, and land patterns for every port group. The integrated approach shortens copper routing and simplifies assembly, although it concentrates more functionality and thermal load into one large 302-TQFP package.
When should I choose the VSC7422XJQ-04 instead of a discrete PHY solution?
Choose the VSC7422XJQ-04 when a board needs a high concentration of copper Gigabit Ethernet ports and limited PCB area. Its twelve integrated PHYs can replace multiple discrete PHY packages while the switching function handles Layer 2 forwarding. Retain a discrete architecture when modular port counts, mixed media interfaces, independently sourced components, or separate PHY thermal paths are stronger priorities than board density.
Is the VSC7422XJQ-04 suitable for telecom access equipment?
The VSC7422XJQ-04 is specifically identified in distributor listings as a telecom Ethernet switch, making it directly relevant to telecom access and aggregation equipment. Its 25-port Layer 2 configuration and 12 integrated copper PHYs support compact multi-port copper designs. For deployed equipment, also verify the exact operating-temperature grade, isolation requirements, regulatory approvals, and any telecom qualification documents.
How many copper PHYs are integrated in the VSC7422XJQ-04?
The VSC7422XJQ-04 integrates 12 copper PHYs within a 25-port Layer 2 switching device. The Microchip product page describes it as a fully integrated 25-port Gigabit Ethernet switch with 12 copper PHYs in one package. The remaining copper-port expansion can be achieved by adding the VSC8512 12-port PHY, producing a 25-port copper design with two principal ICs.
What are the key specifications of VSC7422XJQ-04 that engineers should know?
The essential VSC7422XJQ-04 specifications are 25 Layer 2 Ethernet ports, 12 integrated 10/100/1000Base-T copper PHYs, and a 302-TQFP package measuring 24 x 24 mm. Microchip describes the part as the first fully integrated 25-port Gigabit Ethernet switch with 12 copper PHYs in a single package. Supply limits, timing, temperature range, and power data must be taken from the manufacturer datasheet for design release.
Where can I buy VSC7422XJQ-04 online?
Use the Request a Quote form on this page to request current VSC7422XJQ-04 availability, pricing, and lead time. The form is the appropriate route for a quote because component availability and commercial terms change frequently. Specify the required package quantity, target date, and whether you need a programmed or assembled supply before accepting the quotation.
What is the price of the VSC7422XJQ-04?
Current commercial pricing for the VSC7422XJQ-04 is available through the Request a Quote form on this page. The form supports quantity-specific review and current supply checks without presenting a static price that may become outdated. Include your required order quantity, delivery schedule, and acceptable shipment origin when submitting the request.
What is the lead time for the VSC7422XJQ-04?
Request the current VSC7422XJQ-04 lead time and minimum order quantity through the Request a Quote form on this page. Lead time depends on order size, factory schedule, and shipment destination, so it should be confirmed at the time of quotation. Include your production schedule and annual usage so the supplier can assess allocation and availability.

Engineering reference data for VSC7422XJQ-04 — comparison, design guidance, and compliance information.

Selection Guide

Choose the VSC7422XJQ-04 for a telecom-oriented or otherwise qualified design that needs a 25-port Layer 2 switch with 12 integrated Gigabit Ethernet copper PHYs in one 302-TQFP package. It is especially useful when PCB density and reduced PHY component count are more important than the flexibility of a modular switch design. Consider the VSC7422XJG-04 when its industrial-temperature designation better matches the equipment environment and the complete pin, electrical, and lifecycle requirements are confirmed. For a product that needs only a small number of copper ports, a smaller Ethernet controller or PHY-based device will usually offer a simpler layout and lower board cost. For designs requiring media flexibility or independently replaceable port modules, a modular switch architecture may be more appropriate. In either case, use the manufacturer reference schematic, land pattern, and power-decoupling guidance for final release.

Comparison with Alternatives

Parameter This Product VSC7422XJG-04
Brand Microchip Technology Microchip Technology
Package 302-TQFP (24 x 24 mm) 302-TQFP (24 x 24 mm)
Device Type Telecom Ethernet switch Ethernet IC, L2 switch
Total Ports 25 ports 25 ports
Integrated Copper PHYs 12 ports 12 ports
Switching Layer Layer 2 Layer 2
Maximum Copper Link Rate 1 Gb/s 1 Gb/s
Copper Interface Type 10/100/1000Base-T 10/100/1000Base-T

Key Differentiators

  • Twelve copper PHYs integrated with the switching fabric (vs VSC7422XJG-04)
  • Telecom-oriented ordering variant (vs VSC7422XJG-04)
  • High integration in one 302-TQFP package (vs Discrete switching and PHY implementation)
  • Two-IC path to a 25-port copper design (vs Multi-PHY discrete implementation)

Design Notes

Use the manufacturer reference layout for the 302-TQFP footprint and place input and output decoupling directly at the associated power and ground pins. Because the device combines 12 copper PHYs with switching logic, preserve the recommended partitioning between copper-interface and high-speed digital return paths. Do not substitute a generic 302-pin CAD symbol without verifying the exposed thermal and power lands against the mechanical drawing.

Route each copper interface as a controlled-impedance differential pair with continuous reference planes and avoid crossing plane splits. Keep connector and magnetics interfaces away from clocks, switching-node currents, and regulator switching nodes. Apply the manufacturer’s recommended pair geometry, via stitching, and isolation spacing; these details determine link margin more effectively than component substitution at the same nominal Gigabit Ethernet rate.

Estimate junction temperature from total package dissipation, the board-dependent junction-to-ambient value, and the enclosure’s heat-transfer path. The large 302-TQFP footprint provides substantial lead area for power delivery but concentrates active circuitry in one package. Spread heat through multilayer copper where the mechanical design allows, keep the area beneath the device free of obstructing thermal features, and verify the hottest operating corner in the final enclosure.

Do not treat VSC7422XJG-04 as an automatic substitute without checking the ordering-code differences. The documented alternative retains the 25-port, 12-copper-PHY architecture and 302-TQFP format, but it is identified as the industrial-temperature version. Before substitution, compare the complete pin description, electrical limits, temperature range, lifecycle status, firmware support, and qualification requirements in the manufacturer documentation.

Compliance Information

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

JLCPCB identifies the VSC7422XJQ-04 as RoHS. No AEC-Q100, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for this ordering code.

Data verified on: 2026-11-16 — data verified and curated by XAIPART's component engineering team

Related Searches

VSC7422XJQ-04 datasheet VSC7422XJQ-04 pinout VSC7422XJQ-04 datasheet pdf VSC7422XJQ-04 equivalent VSC7422XJQ-04 replacement VSC7422XJQ-04 vs VSC7422XJG-04 Microchip VSC7422XJQ-04 VSC7422XJQ-04 302 TQFP VSC7422XJQ-04 25 port switch VSC7422 12 copper PHY switch VSC7422XJQ-04 telecom Ethernet switch VSC7422XJQ-04 price VSC7422XJQ-04 stock VSC7422XJQ-04 reference schematic VSC7422XJQ-04 footprint

Related Components & Terms

Microchip Technology VSC7422XJQ-04 VSC7422XJG-04 VSC7422 VSC8512 Ethernet switch Layer 2 switch managed switch Gigabit Ethernet 10/100/1000Base-T integrated copper PHY telecom access equipment industrial Ethernet gateway network appliance 302-TQFP 24 x 24 mm package surface mount Ethernet magnetics differential pair routing Layer 2 frame forwarding MAC address RoHS switching fabric copper Ethernet port control signal
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details