FPGA & CPLD
Produtos (6666)
A3P400-1PQG208I - ProASIC3 FPGA, 400K Gates | Microchip
The Microchip Technology A3P400-1PQG208I is a ProASIC3 flash-based Field Programmable Gate Array (FPGA) delivering 400,000 system gates, 55,296 bits of RAM, and 151 user I/Os in a 208-pin PQFP (PQG208) package. It operates from a 1.5 V core supply and supports a wide range of I/O standards, making it a versatile single-chip solution for cost-sensitive, mid-density logic applications. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer after manufacturing, typically using a hardware description language (HDL) such as Verilog or VHDL. Unlike ASICs, FPGAs offer reprogrammability and faster time-to-market. The ProASIC3 family uses nonvolatile flash technology, providing instant-on operation, low power consumption, and enhanced security compared to SRAM-based FPGAs, which require external configuration memory. The A3P400-1PQG208I features 4,500 logic elements (VersaTiles), 151 user I/Os, and 55,296 bits of embedded RAM. It supports up to 4 I/O banks with programmable voltage standards, including LVCMOS, LVTTL, PCI, and LVDS. The device also includes a PLL for clock management and supports in-system programming (ISP) via JTAG, enabling field updates. Its flash-based architecture provides inherent immunity to single-event upsets (SEU), making it suitable for mission-critical applications. This FPGA is built on a 130 nm flash process, offering a balance of density, performance, and power. The -1 speed grade provides system performance up to 350 MHz for internal logic. The device is available in a 208-pin PQFP package with a 28x28 mm body and 0.5 mm pitch, suitable for surface-mount assembly. The flash configuration is nonvolatile, so the device powers up instantly without external boot memory, reducing BOM cost and board space. Typical applications include industrial automation, motor control, communications infrastructure, and defense systems. Its low power and instant-on capability make it ideal for portable and battery-powered devices. The 151 I/Os allow flexible interfacing with sensors, ADCs, DACs, and communication transceivers. The embedded RAM can be used for FIFOs, buffers, or small lookup tables. When designing with this device, ensure proper decoupling of the 1.5 V core supply and the VCCIBx bank supplies. Use the JTAG interface for programming and boundary-scan testing. The flash-based configuration is secure and does not require external memory, but consider the I/O bank voltage requirements to avoid damage. The device supports hot-swap and power-up sequencing per the datasheet guidelines. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a comprehensive resource for engineers evaluating the A3P400-1PQG208I.
A3P400-2FGG144 - ProASIC3 Flash FPGA 97 I/O | Microchip
The Microchip Technology (formerly Microsemi) A3P400-2FGG144 is a ProASIC3 flash-based FPGA with 403,000 system gates, 97 user I/Os, and 55,296 bits of embedded true dual-port SRAM, housed in a 144-ball fine-pitch BGA (FGG144) package. A field-programmable gate array (FPGA) is a semiconductor device containing a fabric of programmable logic blocks and interconnects that designers configure in the field, sitting in the system hierarchy between fixed-function ASICs and microprocessor-based solutions. ProASIC3 is Microchip's third-generation flash FPGA family, positioned below the higher-density Igloo2 and PolarFire families for low-to-mid density designs. Key features include nonvolatile flash programming that delivers Live at Power-Up (LAPU) Level 0 support, making the device instant-on without an external configuration ROM; single-chip operation that reduces bill-of-materials cost and board area; and optional soft ARM processor support for embedded control. The 130-nm, 7-layer metal (6 copper) flash-based CMOS process provides inherent security because configuration data is stored in nonvolatile flash rather than loaded from external memory at each boot. Technically, the A3P400 offers four I/O banks with independent VCCIBx supplies, allowing mixed-voltage I/O standards within one device, and reprogrammability that supports iterative design and field upgrades. The flash fabric eliminates the configuration-time vulnerability and standby power of SRAM-based competitors in this density class. Typical applications include industrial control and automation, portable and battery-powered instrumentation, secure embedded systems, space-constrained bridge logic, and power-up-critical designs where the FPGA must be active before a host processor completes initialization. A key design consideration is I/O bank planning: only I/O standards sharing compatible voltage levels may be assigned to the same bank, so bank voltage allocation should be finalized before pin assignment in Libero SoC. This page synthesizes distributor pricing, drop-in alternatives from the same 144-ball footprint family, and practical design notes not consolidated in the manufacturer datasheet.
A3P400-2PQG208 - 400K ProASIC3 FPGA | Microchip PQFP-208
The Microchip Technology A3P400-2PQG208 is a ProASIC3 flash-based Field Programmable Gate Array (FPGA) with 400,000 system gates, 5,000 logic elements, 55,296 bits of RAM, and 151 user I/Os, housed in a 208-pin PQFP (PQFP-208, 28x28 mm) package. It operates from a 1.5V core supply and is rated for the commercial temperature range of 0°C to +70°C, making it suitable for cost-sensitive industrial and communications applications. What is an FPGA? A Field Programmable Gate Array is an integrated circuit whose logic fabric can be configured after manufacturing. FPGAs belong to the programmable logic device (PLD) family, sitting above CPLDs in logic capacity and below ASICs in per-unit cost at low volumes. The ProASIC3 family specifically uses non-volatile flash-based configuration, so the A3P400 retains its design when power is removed without requiring an external configuration memory. The A3P400-2PQG208 combines a flash-based, single-chip architecture with 151 user I/Os arranged in four I/O banks. Its 400K system gates and 5K logic elements provide moderate density for glue logic, motor control, communication interfaces, and image-processing tasks. The 1.5V core supply reduces dynamic power compared with older 3.3V FPGAs, while the 28x28 mm PQFP-208 package simplifies PCB layout without needing BGA-level routing. Because ProASIC3 uses flash configuration, the device is instant-on and supports secure in-system programming. This eliminates the need for boot flash and simplifies power sequencing, which is a key advantage in industrial control where reliable startup is critical. The device also supports multiple I/O standards through its four I/O banks, giving designers flexibility to interface with 3.3V, 2.5V, and 1.8V peripherals, subject to the bank voltage supplies. Typical applications include industrial motor control, communication protocol bridging, medical device signal processing, and video/image acquisition. The 151 I/Os are sufficient to capture parallel sensor arrays or drive memory buses, while the embedded flash enables secure remote updates over UART or SPI links. When designing with this FPGA, pay close attention to I/O bank supply decoupling and core 1.5V regulation. Use a 0.1uF capacitor near each VCCIBx pin and a bulk 10uF capacitor per bank. The flash configuration eliminates the need for an external configuration device, but a JTAG header should be provided for programming and debug. This page synthesizes distributor availability, pricing, drop-in alternatives, and practical design notes for the A3P400-2PQG208, going beyond the raw datasheet to help engineers evaluate the part for new and existing FPGA designs.
A3P400-FG256I - 400K Gate ProASIC3 FPGA, 178 I/O | Microchip
The Microchip Technology A3P400-FG256I is a ProASIC3 flash-based FPGA with 400,000 system gates, 178 user I/Os, and a system performance of 231 MHz, supplied in a 256-ball LBGA (FG256) package rated for -40C to +100C (TJ) operation at a 1.5V core voltage. A flash-based FPGA is a field-programmable gate array whose configuration is stored in on-chip non-volatile flash memory rather than an external configuration device. Within the programmable logic hierarchy, the A3P400 belongs to the ProASIC3 family -> FPGA -> programmable logic IC -> semiconductor, occupying the mid-density position of the ProASIC3 lineup and offering a single-chip solution that requires no external boot PROM. Key features include non-volatile flash programming for instant-on, single-chip operation; 178 user I/Os supporting bank-selectable voltage standards across four I/O banks; 231 MHz system performance suitable for glue logic, bus bridging, and control datapaths; and the industrial temperature grade (-40C to +100C TJ) that qualifies the part for harsh-environment deployments. The 256-LBGA surface-mount footprint balances ball pitch and board area for aerospace, industrial, and defense platforms. Technically, ProASIC3 devices use a sea-of-gates flash architecture with VersTile logic elements, on-chip flash locking for design security, and four independent I/O banks whose VCCIBx supplies are routed per bank, allowing only electrically compatible I/O standards to share a bank, as documented in Microchip's ProASIC3 migration application notes. Typical applications include industrial automation control, communications bridging, avionics and defense subsystems, and secure single-chip logic replacement for ASIC or mask-programmable devices. When designing, match I/O voltage standards to the correct bank supply and plan power sequencing of VCC/VCCIBx rails per the datasheet. This page synthesizes distributor stock data, family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
A3P400-PQ208I - ProASIC3 FPGA 400K Gates | Microchip
The Microchip Technology A3P400-PQ208I is a ProASIC3 family Field Programmable Gate Array (FPGA) with 400,000 system gates, 55,296 bits of RAM, and 151 user I/Os, housed in a 208-pin PQFP (PQ208) package. It operates from a 1.5V core supply and supports system performance up to 231 MHz, making it a high-performance, low-density, single-chip solution for a wide range of applications. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer after manufacturing to implement any digital logic function. FPGAs are part of the programmable logic device (PLD) hierarchy, which sits above CPLDs and below ASICs in terms of density and design flexibility. They are used to prototype ASIC designs, implement glue logic, and accelerate compute-intensive tasks in embedded systems. Key features of the A3P400-PQ208I include nonvolatile flash-based configuration, which provides 'Instant On' operation and inherent security against reverse engineering. The device is reprogrammable, allowing design updates in the field. It offers 151 user I/Os with support for multiple I/O standards, and 55,296 bits of RAM for data buffering and storage. The 1.5V core supply minimizes power consumption, while the 208-pin PQFP package provides a compact footprint for space-constrained designs. Technically, the A3P400 is built on a 130nm CMOS flash process, which combines the low power of CMOS with the nonvolatility of flash memory. This architecture eliminates the need for external configuration memory, reducing system cost and board space. The device includes four I/O banks with dedicated supply pins, enabling flexible voltage standard assignment. The ProASIC3 family is supported by Microchip's Libero SoC design suite, which provides synthesis, place-and-route, and programming tools. Typical applications for the A3P400-PQ208I include industrial control systems, automotive electronics, communications infrastructure, and consumer electronics. Its low power and instant-on capability make it suitable for battery-powered devices, while its security features protect intellectual property in high-value designs. When designing with this device, ensure that the 1.5V core supply is properly decoupled with 0.1uF and 10uF capacitors placed close to the VCC pins. The I/O banks must be assigned compatible voltage standards to avoid damage. The device supports JTAG programming, which can be used for both configuration and debugging. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a comprehensive resource for engineers evaluating the A3P400-PQ208I.
A3P400-PQG208 - ProASIC3 FPGA, 400K Gates | Microchip
The Microchip Technology A3P400-PQG208 is a ProASIC3 flash-based Field Programmable Gate Array (FPGA) offering 400,000 system gates, 151 user I/Os, and 55,296 bits of true dual-port SRAM, housed in a 208-pin PQFP (BFQFP) package. It operates with a system performance of up to 231 MHz and supports 2.5 V and 3.3 V mixed-voltage operation, making it a versatile choice for a wide range of applications. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing—hence "field-programmable." Unlike ASICs, FPGAs can be reprogrammed to implement different logic functions, making them ideal for prototyping, low-volume production, and applications requiring flexibility. The ProASIC3 family uses nonvolatile flash technology, providing a single-chip, secure, low-power solution that is "Instant On" and reprogrammable, offering time-to-market benefits at an ASIC-level unit cost. Key features of the A3P400-PQG208 include 400,000 system gates, 151 user I/Os, and 55,296 bits of true dual-port SRAM. It supports 700 Mbps DDR and LVDS-capable I/Os (on A3P250 and above), and offers wide-range power operation. The device is lead-free and RoHS compliant, ensuring environmental compliance. The 208-pin PQFP package provides a compact footprint while allowing sufficient I/O for complex designs. Technically, the ProASIC3 family is built on a flash-based architecture, which eliminates the need for external configuration memory and provides inherent security against reverse engineering. The device includes four I/O banks with dedicated supplies, enabling mixed-voltage operation. The A3P400 supports up to 231 MHz system performance, making it suitable for high-speed applications. The flash-based configuration also allows for instant-on operation, reducing power-up latency. Typical applications include industrial control, automotive electronics, communications infrastructure, and consumer electronics. The A3P400's low power consumption and security features make it ideal for battery-powered devices and applications requiring IP protection. Its reprogrammability allows for field updates and design iterations without hardware changes. When designing with the A3P400-PQG208, consider the I/O bank voltage requirements and ensure proper decoupling of the VCC and VCCIBx pins. The device supports 2.5 V and 3.3 V mixed-voltage operation, so plan the power supply accordingly. Also, note that the PQFP package requires careful PCB layout for thermal management and signal integrity. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a comprehensive resource for engineers evaluating the A3P400-PQG208.
A3P400-PQG208I - ProASIC3 FPGA, 400K Gates | Microchip
The Microchip Technology A3P400-PQG208I is a ProASIC3 family Field Programmable Gate Array (FPGA) delivering 400,000 system gates, 55,296 bits of RAM, and 151 user I/Os in a 208-pin BFQFP (PQG208) package. It operates from a 1.425 V to 1.575 V core supply and supports industrial temperature range from -40°C to 100°C (TJ). A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer after manufacturing, allowing rapid prototyping and flexible hardware design. FPGAs sit within the broader category of programmable logic devices (PLDs), which also includes CPLDs and SoC FPGAs. The ProASIC3 family is a flash-based FPGA, meaning configuration is stored in non-volatile flash memory, enabling instant-on operation without an external boot device. Key features of the A3P400-PQG208I include 400,000 system gates, 55,296 bits of RAM, 151 user I/Os, and a system performance of up to 231 MHz. The device supports multiple I/O standards and features four I/O banks with dedicated VCCIBx supplies. Its flash-based architecture provides inherent security against reverse engineering and supports single-chip, low total cost of ownership (TOC) designs. The ProASIC3 architecture uses a flash-based switch matrix that is reprogrammable and retains configuration when power is removed. This eliminates the need for external configuration memory, reducing board space and BOM cost. The device also includes an abundance of advanced features such as clock conditioning circuits (CCC) and phase-locked loops (PLLs) for robust clock management. Typical applications include industrial control, automotive electronics, communications infrastructure, and consumer electronics where low power, instant-on, and security are critical. The 208-pin BFQFP package with 0.5 mm pitch provides a compact footprint suitable for space-constrained designs. When designing with this device, ensure proper decoupling of the 1.5 V core supply and each VCCIBx bank supply. The four I/O banks allow mixing of different I/O voltage standards, but only compatible standards can be assigned to the same bank. Refer to the ProASIC3 migration application note for guidance on migrating between densities. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a comprehensive resource for engineers evaluating the A3P400-PQG208I.
A3P600-1FG144 - FPGA 600K gates, 144-LBGA | Microchip
The Microchip Technology A3P600-1FG144 is a ProASIC3 flash field-programmable gate array (FPGA) with 600,000 system gates, 97 user I/O pins, and 110,592 RAM bits in a 144-ball LBGA package. It operates from a 1.5 V core supply over a 0 °C to +85 °C commercial temperature range and is manufactured in 130 nm flash CMOS technology. This device supports reprogrammable, instant-on operation without requiring external configuration memory. A field-programmable gate array is an integrated circuit whose logic fabric can be configured after manufacturing. Unlike SRAM-based FPGAs that load configuration data from external memory at every power-up, ProASIC3 devices are flash-based, storing the bitstream in on-chip flash cells. In the product hierarchy, Field Programmable Gate Array FPGA -> programmable logic device -> integrated circuit -> semiconductor. This makes the A3P600-1FG144 attractive for designs needing single-chip, live-at-power-up operation and higher security. Key features include 600,000 system gates, 13,824 CLBs, 97 user I/O pins, 110,592 RAM bits, and a 1.5 V core supply with an operating range of 1.425 V to 1.575 V. The device is packaged in a 13 x 13 mm 144-FPBGA with 1 mm ball pitch, which balances I/O density with practical PCB routability. According to Jotrin parametric data, maximum system performance is approximately 272 MHz. The product is listed as Active with an 8-week manufacturer lead time per Microchip USA. ProASIC3 is built on a 130 nm flash process, giving the A3P600-1FG144 a combination of low power, live-at-power-up behavior, and reprogrammability. The 144-pin FBGA device has four I/O banks, and each bank has a dedicated VCCIBX supply, allowing different I/O voltage standards to be assigned to different banks. This flexibility simplifies mixed-voltage interface design in real systems. The on-chip 110,592 RAM bits can be used for FIFOs, small frame buffers, or scratchpad memory. Typical applications include industrial control, communications infrastructure, medical imaging, defense/aerospace electronics, and test instrumentation. The 97 user I/O pins plus embedded RAM support bus interfacing, protocol bridging, and state-machine logic in compact systems. Since the device is flash-based, it does not require a boot flash device, reducing board area and BOM cost. Designers should pay close attention to 1.5 V core supply decoupling, I/O bank voltage assignments, and PCB fanout for the 1 mm-pitch BGA package. Because this specific FG144 package is RoHS non-compliant, assemblies requiring RoHS should use the pin-compatible FGG144 package variant instead. This page synthesizes distributor pricing, package variants, and practical selection guidance not found in the raw datasheet, helping engineers choose the correct A3P600 grade and meet environmental compliance requirements.
A3P600-1FG144I - 600K Gate ProASIC3 FPGA | Microchip
The Microchip Technology A3P600-1FG144I is a flash-based Field Programmable Gate Array (FPGA) from the ProASIC3 family, offering 600,000 system gates, 272 MHz system performance, and 97 user I/Os in a 144-pin FBGA package. It operates from a 1.5V core supply and is built on 130nm flash technology, providing a secure, low-power, single-chip solution that is Instant On and reprogrammable. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer after manufacturing to implement any digital logic function. FPGAs are part of the programmable logic device family, which sits between ASICs (application-specific integrated circuits) and general-purpose processors in terms of flexibility and performance. The ProASIC3 family uses nonvolatile flash memory for configuration, meaning the device retains its programming even without power, unlike SRAM-based FPGAs that require external configuration memory. Key features of the A3P600-1FG144I include 600K system gates, 272 MHz maximum system performance, 97 user I/Os, and 110,592 bits of RAM. It supports multiple I/O standards including LVCMOS, LVTTL, and PCI, and offers up to 4 I/O banks with dedicated supplies. The device is available in a 144-pin FBGA package with 1mm pitch, and operates over the commercial temperature range of 0°C to 70°C. It is RoHS compliant and lead-free. The ProASIC3 architecture is based on a flash-based switch fabric, which provides instant-on capability, low power consumption, and enhanced security against reverse engineering. The device includes dedicated phase-locked loops (PLLs), SRAM blocks, and a wide range of I/O options, making it suitable for a variety of applications. The 130nm process technology balances performance and power, with a core voltage of 1.5V. Typical applications for the A3P600-1FG144I include industrial control, automotive electronics, communications infrastructure, and consumer electronics. Its low power and instant-on features make it ideal for battery-powered and portable devices, while its security features are valuable for protecting intellectual property in military and aerospace systems. When designing with this FPGA, consider the I/O bank voltage requirements and ensure proper decoupling of the 1.5V core supply. The device supports JTAG programming and can be reprogrammed in-system, simplifying design updates. For high-speed designs, pay attention to signal integrity and use the on-chip PLLs for clock management. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a comprehensive resource for engineers evaluating the A3P600-1FG144I.
A3P600-1FG256 FPGA - 600K Gate, 272MHz | Microchip
The Microchip Technology A3P600-1FG256 is a ProASIC3 flash-based field-programmable gate array (FPGA) with 600,000 system gates, up to 272 MHz maximum system performance, 110,592 bits of embedded RAM, and 177 user I/Os, housed in a 256-ball FBGA package. The device is manufactured in 130nm CMOS technology and runs from a 1.5 V core supply, making it a low-cost, high-reliability programmable logic platform for mid-density digital designs. An FPGA is a semiconductor device containing configurable logic blocks and programmable interconnects that can implement arbitrary digital logic after manufacturing. Unlike microcontrollers, an FPGA is optimized for parallel hardware execution rather than sequential software execution. The ProASIC3 family sits in the FPGA hierarchy as flash-based FPGAs, which retain configuration in on-chip flash memory without requiring an external configuration device. This places the A3P600-1FG256 in the product taxonomy: ProASIC3 FPGA -> flash FPGA -> FPGA -> programmable logic device -> semiconductor. Key features of the A3P600-1FG256 include 600,000 system gates, 272 MHz system performance, 110,592 bits of RAM, 177 user I/Os arranged in four I/O banks, and full nonvolatile flash-based instant-on operation. The flash architecture supports secure in-system programming and design security without external boot memory. The -1 speed grade provides the maximum 272 MHz timing while the FG256 package gives 177 accessible user I/O signals through a 1.0 mm-pitch 256-ball FBGA. Technically, the ProASIC3 FPGA uses a 130nm flash CMOS process with a flash-based switch fabric. Since configuration is stored in flash, the device powers up immediately and is resistant to single-event upsets in configuration memory. The four I/O banks can each be supplied independently, enabling mixed-voltage interfaces. The 110,592 bits of RAM support FIFOs and small buffers without external memory. Typical applications include industrial motor-control and automation logic, communications interface bridging, medical monitoring front-ends, aerospace and defense data handling, and IoT edge aggregation. The 177 I/Os and 272 MHz performance make it suitable for glue logic, protocol translation, and parallel processing tasks where mid-density FPGA capacity is required. A key design consideration is power integrity: the 1.5 V core supply must be decoupled with multiple ceramic capacitors close to the FPGA power balls, and each I/O bank supply must be set to match the interface voltage of the connected devices. Use the ProASIC3 power-up recommendations to avoid sequencing issues. This page synthesizes distributor pricing, in-stock availability, drop-in alternatives, and practical design notes that are not all present in a single datasheet. It focuses on the A3P600-1FG256 variant: 600K gates, -1 speed grade, commercial temperature, and 256-ball FBGA package, while cross-referencing industrial and green-finish variants.
A3P600-1FG256I - ProASIC3 FPGA 600K Gates 1.5V | Microchip
The Microchip Technology (Microsemi) A3P600-1FG256I is a ProASIC3 flash-based FPGA delivering 600K system gates, 177 user I/Os, and system performance up to 272 MHz, fabricated on a 130nm process and powered from a 1.5V core supply in a 256-ball Fine-Pitch Ball Grid Array (FBGA) industrial-grade package. A field programmable gate array (FPGA) is a semiconductor device containing a matrix of programmable logic blocks and interconnects that designers configure in the field, sitting within the programmable logic hierarchy: FPGA -> programmable logic IC -> digital IC. Unlike SRAM-based FPGAs, the ProASIC3 family stores its configuration in on-chip flash, making it a single-chip, non-volatile, instantly-on solution that requires no external boot configuration device. Key features include flash-based reprogrammability with low total cost of ownership (TOC), single-chip operation that eliminates the external configuration PROM, abundant advanced features for its density class, and industrial temperature grading (-40C to +100C junction) for harsh environments. The VersaTile architecture allows each logic tile to act as a three-input LUT, a D-flip-flop/latch with enable, or memory, maximizing fabric efficiency. The 130nm flash cell technology provides secure, non-volatile configuration immune to radiation-induced configuration upset compared to SRAM fabrics, and supports live design updates. Four I/O banks with independently supplied VCCIB rails allow mixed-voltage I/O standards on one device; only I/Os with compatible voltage standards should be assigned to the same bank per Microchip's migration application notes. Typical applications include industrial automation and control, communications and networking line cards, aerospace and defense payloads requiring instant-on logic, medical equipment, and test instrumentation glue-logic consolidation. Design consideration: budget the 1.5V core and per-bank VCCIB supplies separately and verify bank voltage compatibility early in pin assignment to avoid board respins. This page synthesizes distributor pricing tiers, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.
A3P600-1FG484 - ProASIC3 600K-Gate Flash FPGA 484-FBGA | Microchip
The Microchip Technology (Microsemi) A3P600-1FG484 is a 600,000-system-gate ProASIC3 flash-based FPGA with 235 user I/Os, up to 110592 register/tile resources per distributor listings, and a 272 MHz system performance level, housed in a 484-ball FBGA (1 mm ball pitch) package. It operates from a 1.5V core supply and provides 13.5 kbit of embedded true-dual-port SRAM block memory. A flash-based FPGA stores its configuration in on-chip flash memory cells rather than an external configuration PROM. Unlike SRAM FPGAs, ProASIC3 devices are single-chip, instant-on solutions: they configure at power-up in microseconds with no external boot device, and their flash cells are inherently non-volatile and secure, immune to configuration readback attacks. In the programmable logic hierarchy, the A3P600 sits as a mid-density member of the ProASIC3 family, above the A3P250 and A3P400 and below the A3P1000. Key features include 130nm flash process technology, reprogrammability over the JTAG interface, low total cost of ownership from eliminating the configuration flash, and single-supply operation supported by integrated on-chip regulators. The 484-FBGA footprint exposes 235 user I/Os supporting multiple single-ended and differential standards. Architecturally, the device is built from VersaTiles - three-input lookup-table-based logic tiles arranged in a sea-of-tiles fabric - plus embedded SRAM blocks organized as true dual-port memories with independent read/write ports. The 272 MHz performance figure reflects typical internal fabric capability at the -1 speed grade. Typical applications include industrial automation controllers, medical instrumentation, communications line cards, and aerospace/defense pre-development designs where instant-on, single-chip configuration simplifies the power and boot subsystem. A key design consideration is I/O banking: with 235 I/Os across the 484-ball package, VCCIO banks must be grouped by voltage standard early in the design to avoid board respins. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet.
A3P600-1FG484I - ProASIC3 FPGA, 1.5V, 484-FBGA | Microchip
The Microchip Technology (formerly Microsemi/Actel) A3P600-1FG484I is a ProASIC3 flash-based FPGA with 600,000 system gates, 235 user I/Os, and a 1.5V core supply, housed in a 484-ball Fine-Pitch Ball Grid Array (FBGA) package with industrial temperature rating of -40C to +100C. The -1 speed grade designation denotes the standard performance bin within the ProASIC3 family. A flash-based FPGA is a field-programmable gate array whose configuration is stored in on-chip non-volatile flash memory rather than an external configuration device or volatile SRAM. Within the programmable logic hierarchy (VersaTile logic element -> FPGA -> programmable SoC -> digital system), this architecture gives ProASIC3 devices single-chip, instant-on behavior: the fabric is live immediately at power-up, needs no external boot flash, and is inherently more secure against configuration overwrite than SRAM FPGAs. Key features include reprogrammable flash fabric supporting secure, low total cost of ownership (Low TOC) designs, four I/O banks (as documented in Microchip's ProASIC3 migration application note) with independent VCCIBx supplies so only I/Os with compatible voltage standards share a bank, and abundant advanced features in a small-footprint package. The 484-ball FBGA provides a high logic-to-I/O ratio for glue logic, bus bridging, and control-plane designs. Technically, the ProASIC3 fabric is built from VersaTiles, a three-input look-up-based logic cell that can act as combinational logic, sequential logic, or memory, with 1.5V core operation keeping dynamic power low. Because configuration is flash-based, no configuration PROM or microcontroller override circuitry is required at the system level, reducing BOM cost and board area. Typical applications include industrial automation control, telecommunications line-card glue logic and bus interface, medical instrumentation control, aerospace/defense subsystems (where the same family seeds radiation-tolerant RTAX designs), and legacy system life-extension where a single-chip, instant-on FPGA replaces multiple ASSPs. Design consideration: verify that I/O standards with different voltage requirements are assigned to separate I/O banks, since each bank has a dedicated VCCIB supply; the FG484 package exposes four banks per the family migration note. This page synthesizes distributor pricing data, verified same-package drop-in alternatives from the XAIPART catalog, and practical design notes not found in the manufacturer datasheet. Pricing shown is as of 2026-09-01.
A3P600-1FGG144 - 600K Gate ProASIC3 FPGA | Microchip
The Microchip Technology A3P600-1FGG144 is a 600,000-gate ProASIC3 Field Programmable Gate Array (FPGA) with 13,824 CLBs and 97 user I/Os, housed in a 144-ball FBGA (1.00mm pitch) package. It operates from a 1.5V core supply and supports system performance up to 350 MHz, making it a single-chip, reprogrammable solution for mid-density logic integration. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer after manufacturing, using hardware description languages like VHDL or Verilog. FPGAs sit between fixed-function ASICs and general-purpose processors, offering reconfigurable logic, parallel processing, and deterministic timing. The ProASIC3 family is a flash-based FPGA, meaning configuration is stored in non-volatile flash cells, providing instant-on operation, low power, and security without external boot memory. Key features of the A3P600-1FGG144 include 110,592 bits of embedded RAM, 97 I/O pins with support for multiple I/O standards, and four I/O banks with dedicated VCCIBx supplies. The flash-based architecture eliminates the need for configuration PROMs, reduces system cost, and provides design security against cloning. The device also offers low power consumption, with a typical static power of [DATA_NEEDED: static power] and dynamic power scaling with frequency. Technically, the A3P600 uses a 130nm flash process, enabling non-volatile configuration that retains the design even when power is removed. The FPGA includes PLLs, clock conditioning circuitry, and up to 1 Mbit of user flash memory (UFM) for data storage. The 144-ball FBGA package measures 13x13mm with a 1.00mm ball pitch, suitable for compact PCB layouts with moderate I/O density. Typical applications include industrial control, automotive electronics, communications infrastructure, and medical devices where mid-density logic, low power, and secure configuration are required. The 97 I/Os support LVCMOS, LVTTL, PCI, and other standards, enabling direct interface to sensors, ADCs, and communication transceivers. When designing with this device, ensure proper decoupling of the 1.5V core supply and each VCCIBx bank supply. The flash-based architecture allows secure remote updates, but careful attention to I/O bank voltage assignments is required to avoid damage. The device supports in-system programming (ISP) via JTAG, simplifying field updates. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a complete sourcing and design reference for the A3P600-1FGG144.
A3P600-1FGG144I - ProASIC3 FPGA, 600K Gates | Microchip
The Microchip Technology A3P600-1FGG144I is a ProASIC3 Field Programmable Gate Array (FPGA) with 600,000 system gates, 13,824 logic elements, and 97 user I/Os, housed in a 144-ball LBGA (FBGA) package. It operates from a 1.5V core supply and supports industrial temperature range (-40°C to +100°C). This flash-based FPGA offers non-volatile, single-chip, low-power operation with instant-on capability and reprogrammability. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer after manufacturing to implement any digital logic function. FPGAs belong to the programmable logic device (PLD) family, which sits between fixed-function ASICs and general-purpose processors. The ProASIC3 family is Microchip's flash-based FPGA line, offering a single-chip solution without external configuration memory, making it ideal for secure, low-power, and space-constrained applications. Key features of the A3P600-1FGG144I include 600K system gates, 13,824 D-flip-flops, 110,592 bits of RAM, and 97 user I/Os. It supports up to 272 MHz system performance and 350 MHz internal clock frequency. The device includes 1 PLL, 1.5V core voltage, and 3.3V/2.5V/1.8V/1.5V I/O standards. The flash-based architecture provides inherent security against reverse engineering and supports live-at-power-up (LAPU) instant-on operation. The ProASIC3 architecture uses a flash-based switch matrix that retains configuration even when power is removed, eliminating the need for external boot memory. This reduces system cost and board space while improving security. The device supports JTAG (IEEE 1149.1) boundary scan for programming and testing, and can be reprogrammed in-system. The 144-ball LBGA package measures 13x13 mm with 0.8 mm ball pitch, offering a compact footprint for high-density designs. Typical applications include industrial control, automotive electronics, communications infrastructure, and consumer electronics. The A3P600-1FGG144I is well-suited for glue logic, bus interfacing, motor control, and sensor processing. Its low power consumption and instant-on capability make it ideal for battery-powered and power-sensitive designs. When designing with this FPGA, ensure proper decoupling of the 1.5V core supply and all I/O banks. Use the on-chip PLL for clock generation and consider the thermal characteristics of the LBGA package. The device supports multiple configuration modes, including JTAG and SPI, for flexible programming. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a comprehensive resource for evaluating the A3P600-1FGG144I.
A3P600-1FGG256 - ProASIC3 FPGA 600K Gates | Microchip
The Microchip Technology A3P600-1FGG256 is a flash-based ProASIC3 Field Programmable Gate Array (FPGA) providing 600,000 system gates, 110,592 bits of embedded RAM, and 177 user I/O pins in a 256-ball FBGA (LBGA) package. The -1 speed grade supports system performance up to 350 MHz, and the commercial-temperature version operates from 0C to +85C. An FPGA is a reconfigurable digital integrated circuit whose logic fabric can be programmed after manufacture. Unlike microcontrollers, FPGAs implement parallel logic paths; unlike SRAM FPGAs, the ProASIC3 family stores its configuration in nonvolatile flash, so it is an instant-on single-chip solution. In the digital system hierarchy, this part is an FPGA, which belongs to programmable logic devices, then semiconductor integrated circuits. This makes it a flexible alternative to ASICs for low-to-mid volume designs. Key features include 600K system gates, 13,824 VersaTiles, 110,592 bits of RAM, and 177 user I/O arranged in four I/O banks. The device supports 1.5V core operation, multiple I/O voltage standards, and secure flash configuration. The -1 speed grade is optimized for designs needing predictable 350 MHz performance without paying for the faster -2 option. Architecturally, ProASIC3 uses flash-based switches instead of SRAM configuration cells, eliminating the need for an external configuration PROM and providing inherent tamper resistance. The four I/O banks have dedicated VCCIBx supplies, allowing 1.5V, 1.8V, 2.5V, or 3.3V interfaces per bank. Libero SoC Design Suite provides synthesis, place-and-route, and programming tools for the device. Typical applications include industrial automation and PLCs, wired and wireless communications systems, motor control, medical monitoring, and aerospace/defense electronics. Its instant-on behavior, low power, and high I/O count make it appropriate for bridge functions, interface conversion, and system management logic. When designing with this FPGA, pay attention to the four I/O banks: assign compatible voltage standards to each bank and decouple every VCCIBx supply. Because the device is flash-based, a programming header or JTAG connection is required for in-system programming. This page synthesizes distributor pricing, drop-in ProASIC3 alternatives, and practical power and layout guidance not found in the manufacturer datasheet, enabling faster sourcing decisions.
A3P600-1FGG256I - ProASIC3 FPGA, 600K Gates | Microchip
The Microchip Technology A3P600-1FGG256I is a ProASIC3 Field Programmable Gate Array (FPGA) with 600K system gates, 177 user I/Os, and 110,592 bits of flash-based RAM, housed in a 256-ball FBGA package. It operates at a maximum internal frequency of 272 MHz and is fabricated on 130nm flash technology with a 1.5V core supply. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer after manufacturing to implement custom digital logic. Unlike microcontrollers, FPGAs provide massive parallel processing capabilities and are reprogrammable, making them ideal for prototyping and low-to-mid volume production. The ProASIC3 family is a flash-based FPGA, meaning it retains its configuration even without power, offering instant-on capability and enhanced security compared to SRAM-based FPGAs. Key features of the A3P600-1FGG256I include 600K system gates, 177 user I/Os, 110,592 bits of RAM, and support for up to 272 MHz system performance. It also offers low power consumption, a single-chip solution, and a small footprint package. The device is reprogrammable, allowing design updates in the field, and includes advanced security features to protect intellectual property. Technically, the A3P600-1FGG256I is built on Microchip's ProASIC3 flash architecture, which combines the benefits of non-volatile configuration with high performance. The 130nm process technology enables low dynamic power and high logic density. The device supports various I/O standards, including LVCMOS, LVTTL, and differential standards, making it versatile for different interface requirements. Typical applications include industrial control, automotive electronics, communications infrastructure, and consumer electronics. Its reprogrammability and security features make it suitable for applications requiring field updates and IP protection. The 256-ball FBGA package is compact, enabling space-constrained designs. When designing with this FPGA, consider the 1.5V core supply and the need for proper decoupling capacitors near the power pins. The device also requires configuration via JTAG or SPI, and the flash-based nature eliminates the need for external configuration memory. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a comprehensive resource for engineers evaluating the A3P600-1FGG256I.
A3P600-1FGG484 - 600K Gate ProASIC3 FPGA, 235 I/O | Microchip
The Microchip Technology (formerly Microsemi) A3P600-1FGG484 is a 600K-system-gate ProASIC3 flash-based FPGA with 235 user I/Os, a maximum system frequency of 272 MHz, and a 1.5V core voltage, housed in a 484-ball Fine-Pitch Ball Grid Array (FBGA) package. Built on a 130nm CMOS flash process, it offers a nonvolatile, single-chip, reprogrammable solution. A flash-based FPGA is a field-programmable gate array whose configuration is stored in on-chip flash memory cells rather than in an external configuration device or volatile SRAM. In the programmable logic hierarchy, FPGAs sit above CPLDs and below full ASIC custom silicon, occupying the role of reprogrammable system logic. Because ProASIC3 devices are nonvolatile, they power up instantly without a boot sequence and eliminate the BOM cost of a serial configuration flash. Key features include 600,000 system gates implemented with VersaTiles, four I/O banks with independent VCCIB supply rails, embedded memory of 110592 bits, and support for popular single-ended and differential I/O standards. The -1 speed grade balances performance and power for cost-sensitive systems, while 484 solder balls provide high I/O density and reliable power/signal distribution. Architecturally, the ProASIC3 fabric consists of a sea-of-VersaTiles over a segmented routing mesh, with embedded SRAM blocks distributed across the die. The 130nm flash process stores configuration as transistor threshold voltages, making the device immune to configuration upset and reducing radiation sensitivity relative to SRAM FPGAs. Design entry uses Libero SoC (Synplify synthesis, ModelSim simulation). Typical applications include industrial automation controllers, aerospace/defense glue logic and reconfigurable coprocessing, medical instrument interfaces, and communications bridge logic where instant-on, single-chip, high-I/O programmable logic is required. A key design consideration is power supply partitioning: assign only electrically compatible I/O standards to the same VCCIB bank, since the 484-ball package routes each bank's supply independently. This page synthesizes distributor pricing, verified drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet.
A3P600-1FGG484I - 600K Gate Flash FPGA 235 I/O | Microchip
The Microchip Technology (formerly Actel/Microsemi) A3P600-1FGG484I is a 600,000-system-gate ProASIC3 flash-based FPGA with 13,824 VersaTiles (D-flip-flop building blocks), 235 user I/Os, and a -1 speed grade, housed in a 484-ball Fine-Pitch Ball Grid Array (FBGA) package with industrial temperature rating. A flash-based FPGA is a type of field-programmable gate array that stores its configuration in on-chip flash memory cells rather than SRAM backed by an external configuration device. Within the programmable logic hierarchy, the A3P600 sits at the mid-density tier of the ProASIC3 family between the A3P400 and A3P1000, and as a nonvolatile device it belongs to the broader class of single-chip, live-reprogrammable power management... correction: programmable logic devices that boot instantly at power-up without a bootloader or external configuration flash. Key features include single-chip nonvolatile operation that eliminates the external configuration PROM required by SRAM FPGAs, a 1.5V core voltage fabricated on a 130nm flash process, support for performance up to approximately 231 MHz system speed on this speed grade, and four I/O banks with independently supplyable VCCIB rails so mixed-voltage I/O standards can coexist on one device. Technically, ProASIC3 uses the VersaTile architecture, in which every tile can act as a three-input lookup table, a D-flip-flop, or latching element, and the fabric is configured by charge-trapping flash cells. This yields instant-on behavior, low static power, and inherent security because the bitstream is never exposed on an external bus. Typical applications include industrial automation control, military and aerospace subsystems, medical instrumentation, and communications bridge logic where instant power-up and configuration security matter. Design consideration: only I/Os with compatible voltage standards should be assigned to the same VCCIB bank, per the Microchip I/O bank rules. This page synthesizes distributor pricing, same-brand drop-in variants, and practical design notes not found in the manufacturer datasheet.
A3P600-1PQG208 - ProASIC3 FPGA 600K 208-QFP | Microchip
The Microchip Technology A3P600-1PQG208 is a ProASIC3 family flash-based FPGA with 600K system gates, 154 user I/Os, 110592 bits of configuration flash, a maximum system performance of 272 MHz, and 1.5V core operation, housed in a 208-pin BFQFP (PQG208) surface-mount package in a -1 commercial speed grade. A flash FPGA is a field-programmable gate array whose configuration is stored in on-chip nonvolatile flash memory rather than an external configuration device or volatile SRAM. This places the ProASIC3 within the broader hierarchy of programmable logic: FPGA -> flash-based FPGA -> programmable logic device -> semiconductor. Because configuration is nonvolatile, ProASIC3 devices are Instant On and single-chip, needing no boot PROM and offering inherent design security against configuration readback. Key features of the A3P600 include 600K system gates in 130nm flash technology, low total cost of ownership (TOC), and reprogrammability for design iterations. The 154 user I/Os support banked I/O voltages, and the flash cell architecture eliminates the external configuration memory required by SRAM FPGAs, reducing BOM cost and board area. Architecturally, ProASIC3 is the third generation of Microchip's (formerly Actel/Microsemi) flash FPGA family, superseding ProASICPLUS. Four I/O banks are provided on the A3P600, each with dedicated VCCIBx supplies so only compatible I/O standards share a bank. The 130nm process balances density, cost, and power for mid-range designs. Typical applications include industrial control, communications interface bridging, secure single-chip logic, aerospace-adjacent control logic, and glueless ASIC prototyping where a secure, single-chip, instantly-configured FPGA is preferred over SRAM alternatives. For design, respect the I/O bank voltage rules documented in the ProASIC3 migration application notes, and verify speed-grade timing (-1 commercial, 0C to +70C) against your system clock requirements. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
A3P600-1PQG208I - ProASIC3 FPGA 600K Gates | Microchip
The Microchip A3P600-1PQG208I is a flash-based Field Programmable Gate Array (FPGA) from the ProASIC3 family, offering 600,000 system gates, 13,824 VersaTiles (equivalent to 7K logic elements), and 154 user I/Os in a 208-pin PQFP (28x28 mm) package. It operates from a 1.5V core supply with a maximum operating frequency of 272 MHz, fabricated on 130nm flash technology, and is rated for the industrial temperature range of -40°C to +100°C. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer after manufacturing to implement arbitrary digital logic functions. Unlike microcontrollers that execute software, FPGAs implement hardware logic directly, providing parallel processing and deterministic timing. The ProASIC3 family uses nonvolatile flash-based configuration, meaning the design is stored on-chip and is instantly available at power-up (Instant On), eliminating the need for external configuration memory and providing inherent security against reverse engineering. Key features of the A3P600-1PQG208I include 600K system gates, 13,824 VersaTiles (each configurable as a 3-input LUT or D-flip-flop), 154 user I/Os, and 110,592 bits of RAM. The device supports multiple I/O standards including LVCMOS, LVTTL, PCI, and LVDS, with four I/O banks that have dedicated supply pins. The flash-based architecture provides single-chip, low-power operation with instant-on capability and design security, making it ideal for cost-sensitive applications. The ProASIC3 architecture uses a proprietary VersaTile core that can be configured as either a three-input lookup table (LUT) equivalent or as a D-flip-flop/latch with enable. This flexibility allows efficient implementation of both combinatorial and sequential logic. The device includes 4 phase-locked loops (PLLs) for clock management, and supports in-system programming (ISP) via JTAG, allowing field updates. The 130nm flash process provides low static power consumption, making it suitable for battery-powered applications. Typical applications include industrial control, automotive electronics, communications infrastructure, and consumer electronics where low cost, instant-on operation, and design security are critical. The 208-pin PQFP package provides a good balance of I/O count and board area, suitable for medium-complexity designs. The industrial temperature rating allows operation in harsh environments. When designing with this device, ensure proper decoupling of the 1.5V core supply and the I/O bank supplies (VCCIBx). The four I/O banks have dedicated supplies, so only I/Os with compatible voltage standards can be assigned to the same bank. Use the PLLs for clock generation and consider the 272 MHz maximum frequency for timing closure. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a comprehensive resource for evaluating the A3P600-1PQG208I.
A3P600-2FG144 - ProASIC3 FPGA, 600K Gates | Microchip
The Microchip Technology A3P600-2FG144 is a ProASIC3 Field Programmable Gate Array (FPGA) with 600,000 system gates, 13,824 CLBs, and 97 user I/Os, housed in a 144-ball LBGA (13x13 mm) package. It operates from a 1.425V to 1.575V core supply and supports a maximum clock frequency of 350 MHz, making it a high-performance, low-density, single-chip programmable logic solution. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer after manufacturing to implement arbitrary digital logic functions. FPGAs sit within the hierarchy of programmable logic devices (PLDs), above CPLDs in capacity and complexity, and are used to prototype or implement digital systems without the non-recurring engineering costs of ASICs. The ProASIC3 family is a flash-based FPGA, meaning configuration is stored in non-volatile flash cells, allowing instant-on operation and secure, low-power designs. Key features of the A3P600-2FG144 include 600,000 system gates, 13,824 CLBs, 97 user I/Os, and 110,592 bits of RAM. The device supports a wide range of I/O standards and includes advanced clock management with up to 6 PLLs. Its flash-based architecture provides inherent security against reverse engineering and supports single-chip, live-at-power-up operation without an external boot device. Technically, the ProASIC3 family uses a 130-nm flash process, offering low power consumption and high reliability. The device provides 1,024 bits of FlashROM for user data, and its non-volatile configuration means no external configuration memory is required. The 144-FPBGA package measures 13x13 mm with a 1.00 mm ball pitch, enabling compact PCB designs. Typical applications include industrial control, automotive electronics, communications infrastructure, and consumer electronics where low power, security, and instant-on capability are critical. The A3P600-2FG144 is also suitable for aerospace and defense systems requiring radiation-tolerant, flash-based FPGAs. When designing with this device, ensure the core supply is within 1.425V to 1.575V and provide adequate decoupling on all power pins. The device is RoHS non-compliant, so verify your environmental compliance requirements before use. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a comprehensive resource for engineers evaluating the A3P600-2FG144.
A3P600-2FG256 - ProASIC3 FPGA 600K Gates 256-FBGA | Microchip
The Microchip Technology (formerly Microsemi) A3P600-2FG256 is a ProASIC3 flash-based FPGA with 600,000 system gates, 177 user I/Os, and a maximum system frequency of 310 MHz, housed in a 256-ball Fine-Pitch Ball Grid Array (FBGA/LBGA) package operating from a 1.5V core supply. A flash-based FPGA is a field-programmable gate array whose configuration is stored in on-chip flash memory cells rather than SRAM, so it retains its configuration through power cycles and needs no external configuration PROM. Within the programmable logic hierarchy (FPGA -> programmable logic device -> digital IC -> semiconductor), flash FPGAs occupy the single-chip, secure, low-power niche, and the ProASIC3 family is built on a 130nm CMOS flash process with optional soft ARM support. Key features of the A3P600-2FG256 include 600K system gates, 177 available user I/Os, support for multiple I/O voltage banks (VCCIBx), 1.5V core operation, instant-on operation, and single-chip functionality that eliminates external boot flash. The -2 speed grade delivers up to 310 MHz system performance, and the fabric supports embedded memory blocks and soft ARM core implementations for mixed logic-processor designs. Architecturally, ProASIC3 uses a sea-of-gates fabric of VersaTiles - fine-grained logic tiles that implement latches, flip-flops, or combinational functions without routing-dependent delays - giving deterministic timing. Four I/O banks per device allow mixed-voltage I/O standards, and VCCIBx pins are routed through corresponding banks so only compatible I/O standards share a bank, per Microchip's ProASIC3 migration application notes. Typical applications include industrial automation controllers, portable and battery-powered instruments benefiting from the family's low static power, secure single-chip designs where configuration data must not be readable externally, communications line cards, and military/industrial systems migrating to the RTAX-series radiation-tolerant relatives. Design consideration: verify I/O bank assignment early - only I/O standards electrically compatible with the same VCCIBx voltage may share a bank, and the 256-FBGA has a fixed ballout, so bank conflicts discovered late force PCB rework. This page synthesizes distributor pricing, drop-in package-compatible alternatives, AEO-optimized FAQs, and practical design notes not found in the manufacturer datasheet, as of 2026-09-01.
A3P600-2FG256I - ProASIC3 Flash FPGA 256-FBGA | Microchip
The Microchip Technology A3P600-2FG256I is a ProASIC3 family flash-based FPGA offering approximately 7,000 logic elements (LEs) with 177 user I/Os in a 256-ball Fine-Pitch Ball Grid Array (FBGA) package. It operates from a 1.5V core supply and is rated for the industrial temperature range of -40C to +85C. A field-programmable gate array (FPGA) is a semiconductor device containing a fabric of configurable logic blocks and interconnects that the designer programs after manufacturing. FPGAs sit within the broader programmable logic hierarchy: FPGA -> programmable logic IC -> logic IC -> semiconductor. The ProASIC3 family is distinctive because it uses flash-based configuration memory rather than SRAM, so it is a single-chip, non-volatile solution that requires no external configuration PROM and powers up instantly. Key features of the A3P600 include live-at-power-up operation enabled by flash technology, reprogrammability without a boot device, low total cost of ownership (TOC), and a rich I/O set supporting popular single-ended and differential standards. The -2 speed grade provides higher system performance than the -1 grade, while the industrial suffix (I) guarantees -40C to +85C operation for harsh environments. Technically, the ProASIC3 fabric is built on Microchip's VersaTile architecture, where each tile can act as a three-input lookup table (LUT), a D-flip-flop, or a latch with enable, allowing efficient logic packing. I/O banks are grouped with dedicated VCCIBx supplies so only electrically compatible I/O standards share a bank, simplifying mixed-voltage board design. Typical applications include industrial automation and control, communications line cards, medical instrumentation, aerospace and defense sub-systems, and secure single-chip designs where non-volatile, instant-on configuration is mandatory. A key design consideration: verify I/O bank voltage assignments early, because VCCIBx banks constrain which I/O standards may share a bank, and confirm the -2 speed grade meets your timing closure margin at 1.5V core. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.