MAX485CSA+ vs MAX485EESA+ Comparação
Comparação detalhada lado a lado de MAX485CSA+ por Analog Devices e MAX485EESA+ por Analog Devices. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Analog Devices
MAX485EESA+ - ±15kV ESD RS-485/RS-422 Transceiver | Analog Devices
MAX485EESA+ ✓ AtivoComparação de especificações
| Parâmetro | MAX485CSA+ | MAX485EESA+ |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Transceiver Configuration | 1 driver and 1 receiver | — |
| Communication Standards | RS-485 and RS-422 | — |
| Duplex Mode | Half-duplex | — |
| Maximum Data Rate | 2.5Mbps | — |
| Driver Slew Rate | Unlimited for the MAX485 family | Limited (low-EMI) |
| Device Type | Low-power differential transceiver | — |
| Encapsulamento | 8-pin SOIC | — |
| Contagem de pinos | 8 pins | — |
| Tipo de montagem | Surface mount | Surface Mount |
| Tensão de alimentação | [DATA_NEEDED: supply voltage range] | — |
| Corrente de alimentação | [DATA_NEEDED: unloaded and loaded supply current] | — |
| Faixa de temperatura de operação | [DATA_NEEDED: MAX485CSA operating temperature range] | -40 °C to +85 °C |
| Common-Mode Voltage Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Differential Input Sensitivity | [DATA_NEEDED: receiver differential input sensitivity] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Short-Circuit Protection | [DATA_NEEDED: driver short-circuit protection duration] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Product Type | — | RS-485/RS-422 Transceiver |
| Protocol | — | RS-485, RS-422 |
| Duplex | — | Half-Duplex |
| Number of Drivers/Receivers | — | 1/1 |
| Supply Voltage (VCC) | — | 4.75 V to 5.25 V |
| Taxa de dados | — | Up to 2.5 Mbps |
| ESD Protection (Bus Pins, HBM) | — | ±15 kV |
| Quiescent Supply Current | — | 1 mA (typical) |
| Number of Nodes on Bus | — | 32 (1/2 unit load) |
| Receiver Input Impedance | — | 96 kΩ (1/2 unit load) |
| Encapsulamento / Caixa | — | 8-pin SOIC (SO-8, 3.9 mm body) |
| Lead-Free / RoHS Status | — | Lead-Free, RoHS compliant |
| Nível MSL | — | 1 (Unlimited) |