MAX485CSA+ vs MAX485EESA+ Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng MAX485CSA+ sa pamamagitan ng Analog Devices at MAX485EESA+ sa pamamagitan ng Analog Devices. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Analog Devices
MAX485CSA+ - 2.5Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX485CSA+ ✓ NakahandaAnalog Devices
MAX485EESA+ - ±15kV ESD RS-485/RS-422 Transceiver | Analog Devices
MAX485EESA+ ✓ NakahandaPagsanggunian na paghahambing
| Parametro | MAX485CSA+ | MAX485EESA+ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Transceiver Configuration | 1 driver and 1 receiver | — |
| Communication Standards | RS-485 and RS-422 | — |
| Duplex Mode | Half-duplex | — |
| Maximum Data Rate | 2.5Mbps | — |
| Driver Slew Rate | Unlimited for the MAX485 family | Limited (low-EMI) |
| Device Type | Low-power differential transceiver | — |
| Packhaging | 8-pin SOIC | — |
| Bilang ng Pin | 8 pins | — |
| Uri ng Pagpapasok | Surface mount | Surface Mount |
| Volte ng Pagbibigay | [DATA_NEEDED: supply voltage range] | — |
| Kuru-kuryente ng Pagbibigay | [DATA_NEEDED: unloaded and loaded supply current] | — |
| Hanay ng Temperature na Operasyon | [DATA_NEEDED: MAX485CSA operating temperature range] | -40 °C to +85 °C |
| Common-Mode Voltage Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Differential Input Sensitivity | [DATA_NEEDED: receiver differential input sensitivity] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Short-Circuit Protection | [DATA_NEEDED: driver short-circuit protection duration] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Product Type | — | RS-485/RS-422 Transceiver |
| Protocol | — | RS-485, RS-422 |
| Duplex | — | Half-Duplex |
| Number of Drivers/Receivers | — | 1/1 |
| Supply Voltage (VCC) | — | 4.75 V to 5.25 V |
| Rate ng Data | — | Up to 2.5 Mbps |
| ESD Protection (Bus Pins, HBM) | — | ±15 kV |
| Quiescent Supply Current | — | 1 mA (typical) |
| Number of Nodes on Bus | — | 32 (1/2 unit load) |
| Receiver Input Impedance | — | 96 kΩ (1/2 unit load) |
| Packhaging / Kaso | — | 8-pin SOIC (SO-8, 3.9 mm body) |
| Lead-Free / RoHS Status | — | Lead-Free, RoHS compliant |
| Level ng MSL | — | 1 (Unlimited) |