MAX485CSA+ vs MAX485EESA+ 比較

詳細並排比較 MAX485CSA+ 由 Analog Devices 與 MAX485EESA+ 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Analog Devices
MAX485CSA+ MAX485CSA+ - 2.5Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX485CSA+ - 2.5Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX485CSA+ ✓ 啟用中

規格比較

參數 MAX485CSA+ MAX485EESA+
品牌 Analog Devices Analog Devices
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
Transceiver Configuration 1 driver and 1 receiver —
Communication Standards RS-485 and RS-422 —
Duplex Mode Half-duplex —
Maximum Data Rate 2.5Mbps —
Driver Slew Rate Unlimited for the MAX485 family Limited (low-EMI)
Device Type Low-power differential transceiver —
封裝 8-pin SOIC —
腳位數 8 pins —
安裝類型 Surface mount Surface Mount
供應電壓 [DATA_NEEDED: supply voltage range] —
供應電流 [DATA_NEEDED: unloaded and loaded supply current] —
工作溫度範圍 [DATA_NEEDED: MAX485CSA operating temperature range] -40 °C to +85 °C
Common-Mode Voltage Range [DATA_NEEDED: receiver common-mode voltage range] —
Differential Input Sensitivity [DATA_NEEDED: receiver differential input sensitivity] —
Driver Output Current [DATA_NEEDED: driver output current] —
Short-Circuit Protection [DATA_NEEDED: driver short-circuit protection duration] —
RoHS Compliance [DATA_NEEDED: RoHS compliance status] —
REACH Compliance [DATA_NEEDED: REACH compliance status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Product Type — RS-485/RS-422 Transceiver
Protocol — RS-485, RS-422
Duplex — Half-Duplex
Number of Drivers/Receivers — 1/1
Supply Voltage (VCC) — 4.75 V to 5.25 V
資料速率 — Up to 2.5 Mbps
ESD Protection (Bus Pins, HBM) — ±15 kV
Quiescent Supply Current — 1 mA (typical)
Number of Nodes on Bus — 32 (1/2 unit load)
Receiver Input Impedance — 96 kΩ (1/2 unit load)
封裝 / 外殼 — 8-pin SOIC (SO-8, 3.9 mm body)
Lead-Free / RoHS Status — Lead-Free, RoHS compliant
MSL 等級 — 1 (Unlimited)

資料表與資源

瀏覽所有產品 建立 BOM 索取報價