MAX485CSA+ vs MAX485EESA+ 对比

详细并排对比 MAX485CSA+ 出自 Analog Devices 和 MAX485EESA+ 出自 Analog Devices。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况,以确定最适合您设计需求的元器件。

Analog Devices
MAX485CSA+ MAX485CSA+ - 2.5Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX485CSA+ - 2.5Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX485CSA+ ✓ 量产中

规格对比

参数 MAX485CSA+ MAX485EESA+
品牌 Analog Devices Analog Devices
分类 Interface ICs Interface ICs
生命周期状态 有效 有效
Transceiver Configuration 1 driver and 1 receiver —
Communication Standards RS-485 and RS-422 —
Duplex Mode Half-duplex —
Maximum Data Rate 2.5Mbps —
Driver Slew Rate Unlimited for the MAX485 family Limited (low-EMI)
Device Type Low-power differential transceiver —
封装 8-pin SOIC —
引脚数量 8 pins —
安装类型 Surface mount Surface Mount
电源电压 [DATA_NEEDED: supply voltage range] —
电源电流 [DATA_NEEDED: unloaded and loaded supply current] —
工作温度范围 [DATA_NEEDED: MAX485CSA operating temperature range] -40 °C to +85 °C
Common-Mode Voltage Range [DATA_NEEDED: receiver common-mode voltage range] —
Differential Input Sensitivity [DATA_NEEDED: receiver differential input sensitivity] —
Driver Output Current [DATA_NEEDED: driver output current] —
Short-Circuit Protection [DATA_NEEDED: driver short-circuit protection duration] —
RoHS Compliance [DATA_NEEDED: RoHS compliance status] —
REACH Compliance [DATA_NEEDED: REACH compliance status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Product Type — RS-485/RS-422 Transceiver
Protocol — RS-485, RS-422
Duplex — Half-Duplex
Number of Drivers/Receivers — 1/1
Supply Voltage (VCC) — 4.75 V to 5.25 V
数据速率 — Up to 2.5 Mbps
ESD Protection (Bus Pins, HBM) — ±15 kV
Quiescent Supply Current — 1 mA (typical)
Number of Nodes on Bus — 32 (1/2 unit load)
Receiver Input Impedance — 96 kΩ (1/2 unit load)
封装 / 外壳 — 8-pin SOIC (SO-8, 3.9 mm body)
Lead-Free / RoHS Status — Lead-Free, RoHS compliant
MSL 等级 — 1 (Unlimited)

数据手册与资源

浏览全部产品 创建 BOM 获取报价