5CEBA4F17I7 - Cyclone V E FPGA, 49K LE, 256-LBGA | Intel / Altera
N.º da peça: 5CEBA4F17I7 ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $215 | $215,00 |
| 10 | $198.5 | $1.985,00 |
| 100 | $175 | $17.500,00 |
| 500 | $155 | $77.500,00 |
| 1.000 | $140 | $140.000,00 |
5CEBA4F17I7 Visão geral
A field-programmable gate array (FPGA) is a semiconductor integrated circuit whose logic functionality is defined after manufacturing through programmable interconnect and configurable logic blocks. FPGAs belong to the broader hierarchy of programmable logic devices (PLDs), which also includes CPLDs, and they sit within the integrated circuits (ICs) family, specifically the programmable logic sub-category. Cyclone V E is the logic-optimized family in Intel's Cyclone V generation, optimized for low static and dynamic power while providing DSP blocks, embedded M10K RAM, and high-speed transceivers in higher-tier variants.
Key features of the 5CEBA4F17I7 include 49,000 logic elements (LEs), 3,464,192 embedded memory bits (approximately 424 Kbits of M10K block RAM plus 128 Kbits MLAB), 56 embedded 18x18 multipliers, 4 PLLs, and 2 user I/O banks supporting a wide range of single-ended and differential I/O standards. The device supports configuration via Active Serial (AS), Passive Serial (PS), Fast Passive Parallel (FPP), and JTAG modes, enabling flexible boot from EPCS or EPCQ flash devices. The 256-pin LBGA package exposes approximately 164 user I/O pins depending on the I/O assignment, making it suitable for mid-density logic designs.
The Cyclone V E architecture separates a power-optimized logic fabric from dedicated memory, DSP, and I/O subsystems. Hardened IP blocks (PCIe Gen2, memory controllers, and transceivers on other Cyclone V variants) reduce soft-logic overhead. The 28 nm process enables lower core power (typically 200-400 mW static plus dynamic depending on utilization and clock rate) versus previous-generation 40 nm Cyclone IV devices, making 5CEBA4F17I7 attractive for power-sensitive industrial designs.
Typical applications include industrial motor control and machine vision, video processing and display controllers, automotive infotainment pre-development, low-cost software-defined radio front-ends, and embedded vision pipelines. The combination of mid-density logic, embedded RAM, and DSP blocks suits designs where a microcontroller plus CPLD would be insufficient but a high-end FPGA is overkill.
When designing with this part, plan power sequencing for the 1.1 V core and 2.5 V/3.3 V I/O rails. Use the Altera/Intel Quartus II or Quartus Prime design suite for synthesis, place-and-route, and timing closure. The 17x17 mm LBGA package requires PCB design with 1.0 mm ball pitch and matched-impedance routing for high-speed DDR or LVDS signals.
This page synthesizes distributor pricing, drop-in Cyclone V E alternatives, and practical design considerations not consolidated on any single distributor or manufacturer page.
Alternativas drop-in para 5CEBA4F17I7 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com 5CEBA4F17I7 (mesmo formato e footprint) — diferindo em Package, Logic Elements (LE), Speed Grade, Process Technology, Operating Temperature.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
5CEBA4F17C8N
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
5CEBA4F23C8N
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$62.41 / unidade
Ver ficha técnica →10M08DCF256C8G
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$2.28 / unidade
Ver ficha técnica →10M16DCF256C8G
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$17.1 / unidade
Ver ficha técnica →10M25DCF256C8G
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$24.95 / unidade
Ver ficha técnica →10M40DCF256A7G
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$21.8 / unidade
Ver ficha técnica →10M50DCF256A7G
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$29.8 / unidade
Ver ficha técnica →5CEBA4F17I7 Classificações máximas e características elétricas
| Series | Cyclone V E |
| Family | 5CEA4 |
| Logic Elements (LE) | 49,000 |
| Embedded Memory Bits | 3,464,192 |
| Embedded 18x18 Multipliers | 128 |
| PLLs | 4 |
| User I/O Banks | 2 |
| Process Technology | 28 nm TSMC low-power |
| Core Voltage | 1.1 V |
| Temperatura de operação | -40C to +100C (industrial, 'I' grade) |
| Speed Grade | 7 |
| Encapsulamento | 256-LBGA (F17, 17x17 mm, 1.0 mm pitch) |
| Tipo de montagem | Surface Mount |
| Configuration Modes | AS, PS, FPP, JTAG |
| Status RoHS | Compliant |
Guia de Configuração de Pinos do 5CEBA4F17I7 256-lbga (f17, 17x17 mm, 1.0 mm pitch)
Configuração de pinos para 5CEBA4F17I7 (pacote 256-lbga (f17, 17x17 mm, 1.0 mm pitch)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para 5CEBA4F17I7.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
5CEBA4F17I7 é adequado para 6 aplicaçãos: Industrial Motor Control, Machine Vision and Embedded Imaging, Video Processing and Display Controllers, Software-Defined Radio Front-End, Automotive Infotainment Pre-Development, Test and Measurement Instrumentation.
Industrial Motor Control
The 5CEBA4F17I7 is well-suited to industrial motor control applications requiring high-resolution PWM generation, encoder feedback processing, and field-oriented control (FOC) algorithms. Its 128 embedded 18x18 multipliers accelerate Park and Clarke transforms, while the 3.46 Mbits of embedded RAM buffer current and voltage sample streams from synchronous ADCs. The industrial -40C to +100C temperature grade supports deployment in factory enclosures with limited thermal management. Industrial designers pair the FPGA with a power-module gate driver and current-sense op-amp to build a complete servo or VFD control board.
Recomendado
Machine Vision and Embedded Imaging
Mid-density machine vision pipelines benefit from the 5CEBA4F17I7's combination of DSP blocks and embedded RAM. The 128 multipliers support real-time Bayer demosaicing, Sobel edge detection, or simple convolutional filters at 720p/30 fps line rates. The 256-LBGA package exposes enough LVDS pairs for direct MIPI-CSI-2 bridge designs when paired with an external deserializer. Industrial-grade temperature rating supports deployment in factory-floor camera enclosures where ambient temperatures exceed 70C.
Recomendado
Video Processing and Display Controllers
The 5CEBA4F17I7 can drive multi-megapixel display pipelines, including HDMI/DVI transmission via external TMDS transmitters, LCD panel timing controllers, and lightweight video scaling. Its 3.46 Mbits of embedded RAM hold 1-2 frames of line buffers for scaling and color-space conversion. The 4 PLLs generate independent pixel clocks for input capture and output display. Industrial temperature grade allows deployment in digital signage, medical imaging preview screens, and outdoor kiosks.
Recomendado
Software-Defined Radio Front-End
Low-cost SDR designs leverage the 5CEBA4F17I7's DSP blocks for digital downconversion (DDC), channelization, and modulation/demodulation. While the 'E' sub-family lacks hard transceivers, designers pair the FPGA with external ADCs such as the AD9680 family to digitize IF or baseband signals and process them in the fabric. Industrial temperature rating supports base-station and tactical-radio deployment. The 49K-LE capacity supports 4-8 simultaneous narrowband channels with appropriate filtering.
Recomendado
Automotive Infotainment Pre-Development
Although the 5CEBA4F17I7 is industrial-grade rather than AEC-Q100 qualified, it is widely used during pre-development of automotive infotainment, ADAS sensor fusion prototypes, and instrument cluster controllers where engineering samples accelerate software bring-up. The 49K-LE capacity supports H.264 encode/decode test benches, CAN-FD gateway logic, and LVDS display output. Production-bound designs typically migrate to AEC-Q100 Cyclone V variants or to the Cyclone V GX family for higher I/O bandwidth.
Recomendado
Test and Measurement Instrumentation
Bench-top T&M equipment such as protocol analyzers, logic analyzer front-ends, and arbitrary waveform generators often use the 5CEBA4F17I7. The 128 multipliers support DDS (direct digital synthesis) phase accumulators and FIR filter coefficient math, while 3.46 Mbits of RAM buffer sample streams from high-speed ADCs. The 4 PLLs synthesize multiple timing domains required for trigger conditioning and clock recovery. Industrial temperature grade supports lab environments without active cooling.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para 5CEBA4F17I7 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | 5CEBA4F17C8N | 10M08DCF256C8G | 10M16DCF256C8G | 10M25DCF256C8G | 10M40DCF256A7G | 10M50DCF256A7G |
|---|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 256-LBGA (F17, 17x17 mm) | 256-LBGA (F17) - same | 256-FBGA - same ball count | 256-FBGA - same ball count | 256-FBGA - same ball count | 256-FBGA - same ball count | 256-FBGA - same ball count |
| Logic Elements | 49,000 | 49,000 | 8,000 | 16,000 | 25,000 | 40,000 | 50,000 |
| Embedded Memory | 3,464,192 bits | 3,464,192 bits | 378,880 bits | 549,888 bits | 675,840 bits | 1,259,520 bits | 1,638,400 bits |
| Embedded 18x18 Multipliers | 128 | 128 | 24 | 45 | 55 | 125 | 144 |
| PLLs | 4 | 4 | 2 | 4 | 4 | 4 | 4 |
| Temperature Grade | Industrial -40C to +100C | Commercial 0C to +85C | Commercial 0C to +85C | Commercial 0C to +85C | Commercial 0C to +85C | Industrial -40C to +100C | Industrial -40C to +100C |
| Configuration Memory | External (EPCS/EPCQ flash) | External flash | Internal flash (MAX 10) | Internal flash (MAX 10) | Internal flash (MAX 10) | Internal flash (MAX 10) | Internal flash (MAX 10) |
Principais diferenciais
- Industrial temperature grade with same-die drop-in option (vs 5CEBA4F17C8N)
- Higher logic density per ball in 256-ball package (vs 10M25DCF256C8G)
- Cyclone V DSP block architecture vs MAX 10 fabric-only DSP (vs 10M50DCF256A7G)
Notas de projeto
The 5CEBA4F17I7 requires three power rails: 1.1 V core (VCC), 2.5 V or 3.3 V analog/PLL (VCCA_PLL, VCCPD), and I/O VCCIO per bank (1.2 V to 3.3 V). Estimated: a typical design with 40% LE utilization at 100 MHz core clock draws approximately 250-400 mA on the 1.1 V core. Use the Cyclone V PowerPlay Early Power Estimator spreadsheet before final schematic capture to size bulk decoupling. Decoupling: place 0.1 uF X7R capacitors within 2 mm of every VCC pin pair, plus 10 uF bulk on each rail.
The 256-LBGA F17 package uses 1.0 mm ball pitch in a 17x17 mm body. PCB design requires 0.5 mm via-in-pad or microvia technology for the breakout. Signal layers: use a 6-layer stackup minimum with a dedicated ground plane beneath the device for return-path integrity. For DDR2/DDR3 interfaces, length-match DQS to clock within +/-25 ps and route DQ/DM within +/-50 ps. The exposed die-attach pad is electrically isolated - connect to ground plane with thermal vias for heat dissipation.
Do not confuse the Cyclone V E (logic-only) 5CEBA4F17I7 with the GX or GT variants that include high-speed transceivers - the order codes share the '5CEBA' prefix but diverge in features and pinout. When migrating between temperature grades, verify that commercial-grade (C) parts meet your ambient requirement - substituting C for I in a 90C enclosure causes parametric drift and timing failures. Always run the Quartus Prime TimeQuest timing analyzer on the final bitstream before production programming.
Keep all clock inputs (CLK[0..n]) routed as short as possible with controlled 50-ohm impedance and via counts minimized to 2. Differential clocks (LVDS) require 100-ohm differential routing with match length to +/-5 mil. Place configuration memory (EPCS or EPCQ flash) on the same board side as the FPGA within 25 mm to minimize AS configuration signal integrity issues. The nCONFIG and nSTATUS pins require 10 kohm pull-ups to VCCPD.
Informações de conformidade
RoHS compliant per Altera/Intel product page. Industrial temperature grade (-40C to +100C) but not AEC-Q100 qualified - choose Cyclone V automotive variants for AEC-Q100 applications. Pb-free and halogen-free per the Altera material declaration.
