A3P600-2PQ208I - 600K Gate ProASIC3 FPGA | Microchip
N.º da peça: A3P600-2PQ208I ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $45.32 | $45,32 |
| 10 | $41.87 | $418,70 |
| 100 | $36.54 | $3.654,00 |
| 500 | $32.1 | $16.050,00 |
| 1.000 | $28.75 | $28.750,00 |
A3P600-2PQ208I Visão geral
A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer or designer after manufacturing. Unlike fixed-function ASICs, FPGAs contain an array of programmable logic blocks and interconnects that can be programmed to implement complex digital functions. FPGAs are part of the broader category of programmable logic devices (PLDs), which also includes CPLDs and SoC FPGAs. They are essential in applications requiring flexibility, rapid prototyping, and field upgrades.
Key features of the A3P600-2PQ208I include 600,000 system gates, 110,592 bits of RAM, and 154 user I/O pins. It operates from a 1.5V core supply with 3.3V, 2.5V, and 1.8V I/O support, and is available in a 208-pin PQFP package. The device is flash-based, providing non-volatile configuration that is instantly available on power-up, eliminating the need for external configuration memory. It also supports reprogrammability, allowing design updates in the field.
Technically, the ProASIC3 family uses a flash-based architecture that combines the benefits of ASIC and FPGA technologies. The flash switches provide low power consumption, high security, and immunity to radiation-induced configuration upsets. The device includes four I/O banks with dedicated VCCIBx supplies, enabling mixed-voltage I/O standards. The A3P600-2PQ208I is part of the ProASIC3 family, which offers a single-chip solution with low total cost of ownership.
Typical applications include industrial control, automotive electronics, communications infrastructure, and consumer electronics. The device is well-suited for glue logic, bus interfacing, and custom logic implementations where mid-density logic and reprogrammability are required. Its 154 I/O pins provide ample connectivity for peripheral interfaces.
When designing with this device, consider the I/O bank voltage requirements and ensure proper decoupling of the core and I/O supplies. The flash-based architecture requires no configuration device, simplifying the board design. For high-speed designs, pay attention to signal integrity and use the device's programmable I/O standards to match the interface requirements.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a comprehensive resource for evaluating the A3P600-2PQ208I.
Alternativas drop-in para A3P600-2PQ208I — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com A3P600-2PQ208I (mesmo formato e footprint) — diferindo em Package, System Gates, Configuration Memory, Operating Temperature, Process Technology.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
A3P600-PQG208I
✅ Drop-In✓ Em estoque
$68.08 / unidade
Ver ficha técnica →A3P600-1PQG208I
✅ Drop-In✓ Em estoque
$68 / unidade
Ver ficha técnica →A3P600-2PQG208I
✅ Drop-In✓ Em estoque
$71.3 / unidade
Ver ficha técnica →A3P600-2PQG208
✅ Drop-In✓ Em estoque
$55.87 / unidade
Ver ficha técnica →A3P600-1PQG208
✅ Drop-In✓ Em estoque
$49.94 / unidade
Ver ficha técnica →A3P600-2PQ208I Classificações máximas e características elétricas
| Family | ProASIC3 |
| System Gates | 600000 |
| RAM Bits | 110592 |
| Number of I/O | 154 |
| Encapsulamento | 208-PQFP (28x28 mm) |
| Core Supply Voltage | 1.5 V |
| I/O Supply Voltage | 1.8 V, 2.5 V, 3.3 V |
| Number of I/O Banks | 4 |
| System Performance | 350 MHz |
| Tipo de montagem | Surface Mount |
| Temperatura de operação | -40C to +100C |
| Status RoHS | Compliant |
| Lead-Free | Yes |
| Configuration | Flash-based, non-volatile |
| Reprogrammability | Yes |
Configuração de pinos do A3P600-2PQ208I
| Pino 1 | IO — User I/O pin |
| Pino 2 | IO — User I/O pin |
| Pino 3 | IO — User I/O pin |
| Pino 4 | IO — User I/O pin |
| Pino 5 | IO — User I/O pin |
| Pino 6 | IO — User I/O pin |
| Pino 7 | IO — User I/O pin |
| Pino 8 | IO — User I/O pin |
| Pino 9 | IO — User I/O pin |
| Pino 10 | IO — User I/O pin |
| Pino 11 | IO — User I/O pin |
| Pino 12 | IO — User I/O pin |
| Pino 13 | IO — User I/O pin |
| Pino 14 | IO — User I/O pin |
| Pino 15 | IO — User I/O pin |
| Pino 16 | IO — User I/O pin |
| Pino 17 | IO — User I/O pin |
| Pino 18 | IO — User I/O pin |
| Pino 19 | IO — User I/O pin |
| Pino 20 | IO — User I/O pin |
| Pino 21 | IO — User I/O pin |
| Pino 22 | IO — User I/O pin |
| Pino 23 | IO — User I/O pin |
| Pino 24 | IO — User I/O pin |
| Pino 25 | IO — User I/O pin |
| Pino 26 | IO — User I/O pin |
| Pino 27 | IO — User I/O pin |
| Pino 28 | IO — User I/O pin |
| Pino 29 | IO — User I/O pin |
| Pino 30 | IO — User I/O pin |
| Pino 31 | IO — User I/O pin |
| Pino 32 | IO — User I/O pin |
| Pino 33 | IO — User I/O pin |
| Pino 34 | IO — User I/O pin |
| Pino 35 | IO — User I/O pin |
| Pino 36 | IO — User I/O pin |
| Pino 37 | IO — User I/O pin |
| Pino 38 | IO — User I/O pin |
| Pino 39 | IO — User I/O pin |
| Pino 40 | IO — User I/O pin |
| Pino 41 | IO — User I/O pin |
| Pino 42 | IO — User I/O pin |
| Pino 43 | IO — User I/O pin |
| Pino 44 | IO — User I/O pin |
| Pino 45 | IO — User I/O pin |
| Pino 46 | IO — User I/O pin |
| Pino 47 | IO — User I/O pin |
| Pino 48 | IO — User I/O pin |
| Pino 49 | IO — User I/O pin |
| Pino 50 | IO — User I/O pin |
| Pino 51 | IO — User I/O pin |
| Pino 52 | IO — User I/O pin |
| Pino 53 | IO — User I/O pin |
| Pino 54 | IO — User I/O pin |
| Pino 55 | IO — User I/O pin |
| Pino 56 | IO — User I/O pin |
| Pino 57 | IO — User I/O pin |
| Pino 58 | IO — User I/O pin |
| Pino 59 | IO — User I/O pin |
| Pino 60 | IO — User I/O pin |
| Pino 61 | IO — User I/O pin |
| Pino 62 | IO — User I/O pin |
| Pino 63 | IO — User I/O pin |
| Pino 64 | IO — User I/O pin |
| Pino 65 | IO — User I/O pin |
| Pino 66 | IO — User I/O pin |
| Pino 67 | IO — User I/O pin |
| Pino 68 | IO — User I/O pin |
| Pino 69 | IO — User I/O pin |
| Pino 70 | IO — User I/O pin |
| Pino 71 | IO — User I/O pin |
| Pino 72 | IO — User I/O pin |
| Pino 73 | IO — User I/O pin |
| Pino 74 | IO — User I/O pin |
| Pino 75 | IO — User I/O pin |
| Pino 76 | IO — User I/O pin |
| Pino 77 | IO — User I/O pin |
| Pino 78 | IO — User I/O pin |
| Pino 79 | IO — User I/O pin |
| Pino 80 | IO — User I/O pin |
| Pino 81 | IO — User I/O pin |
| Pino 82 | IO — User I/O pin |
| Pino 83 | IO — User I/O pin |
| Pino 84 | IO — User I/O pin |
| Pino 85 | IO — User I/O pin |
| Pino 86 | IO — User I/O pin |
| Pino 87 | IO — User I/O pin |
| Pino 88 | IO — User I/O pin |
| Pino 89 | IO — User I/O pin |
| Pino 90 | IO — User I/O pin |
| Pino 91 | IO — User I/O pin |
| Pino 92 | IO — User I/O pin |
| Pino 93 | IO — User I/O pin |
| Pino 94 | IO — User I/O pin |
| Pino 95 | IO — User I/O pin |
| Pino 96 | IO — User I/O pin |
| Pino 97 | IO — User I/O pin |
| Pino 98 | IO — User I/O pin |
| Pino 99 | IO — User I/O pin |
| Pino 100 | IO — User I/O pin |
| Pino 101 | IO — User I/O pin |
| Pino 102 | IO — User I/O pin |
| Pino 103 | IO — User I/O pin |
| Pino 104 | IO — User I/O pin |
| Pino 105 | IO — User I/O pin |
| Pino 106 | IO — User I/O pin |
| Pino 107 | IO — User I/O pin |
| Pino 108 | IO — User I/O pin |
| Pino 109 | IO — User I/O pin |
| Pino 110 | IO — User I/O pin |
| Pino 111 | IO — User I/O pin |
| Pino 112 | IO — User I/O pin |
| Pino 113 | IO — User I/O pin |
| Pino 114 | IO — User I/O pin |
| Pino 115 | IO — User I/O pin |
| Pino 116 | IO — User I/O pin |
| Pino 117 | IO — User I/O pin |
| Pino 118 | IO — User I/O pin |
| Pino 119 | IO — User I/O pin |
| Pino 120 | IO — User I/O pin |
| Pino 121 | IO — User I/O pin |
| Pino 122 | IO — User I/O pin |
| Pino 123 | IO — User I/O pin |
| Pino 124 | IO — User I/O pin |
| Pino 125 | IO — User I/O pin |
| Pino 126 | IO — User I/O pin |
| Pino 127 | IO — User I/O pin |
| Pino 128 | IO — User I/O pin |
| Pino 129 | IO — User I/O pin |
| Pino 130 | IO — User I/O pin |
| Pino 131 | IO — User I/O pin |
| Pino 132 | IO — User I/O pin |
| Pino 133 | IO — User I/O pin |
| Pino 134 | IO — User I/O pin |
| Pino 135 | IO — User I/O pin |
| Pino 136 | IO — User I/O pin |
| Pino 137 | IO — User I/O pin |
| Pino 138 | IO — User I/O pin |
| Pino 139 | IO — User I/O pin |
| Pino 140 | IO — User I/O pin |
| Pino 141 | IO — User I/O pin |
| Pino 142 | IO — User I/O pin |
| Pino 143 | IO — User I/O pin |
| Pino 144 | IO — User I/O pin |
| Pino 145 | IO — User I/O pin |
| Pino 146 | IO — User I/O pin |
| Pino 147 | IO — User I/O pin |
| Pino 148 | IO — User I/O pin |
| Pino 149 | IO — User I/O pin |
| Pino 150 | IO — User I/O pin |
| Pino 151 | IO — User I/O pin |
| Pino 152 | IO — User I/O pin |
| Pino 153 | IO — User I/O pin |
| Pino 154 | IO — User I/O pin |
| Pino 155 | VCC — Core power supply (1.5V) |
| Pino 156 | GND — Ground |
| Pino 157 | VCC — Core power supply (1.5V) |
| Pino 158 | GND — Ground |
| Pino 159 | VCC — Core power supply (1.5V) |
| Pino 160 | GND — Ground |
| Pino 161 | VCC — Core power supply (1.5V) |
| Pino 162 | GND — Ground |
| Pino 163 | VCC — Core power supply (1.5V) |
| Pino 164 | GND — Ground |
| Pino 165 | VCC — Core power supply (1.5V) |
| Pino 166 | GND — Ground |
| Pino 167 | VCC — Core power supply (1.5V) |
| Pino 168 | GND — Ground |
| Pino 169 | VCC — Core power supply (1.5V) |
| Pino 170 | GND — Ground |
| Pino 171 | VCC — Core power supply (1.5V) |
| Pino 172 | GND — Ground |
| Pino 173 | VCC — Core power supply (1.5V) |
| Pino 174 | GND — Ground |
| Pino 175 | VCC — Core power supply (1.5V) |
| Pino 176 | GND — Ground |
| Pino 177 | VCC — Core power supply (1.5V) |
| Pino 178 | GND — Ground |
| Pino 179 | VCC — Core power supply (1.5V) |
| Pino 180 | GND — Ground |
| Pino 181 | VCC — Core power supply (1.5V) |
| Pino 182 | GND — Ground |
| Pino 183 | VCC — Core power supply (1.5V) |
| Pino 184 | GND — Ground |
| Pino 185 | VCC — Core power supply (1.5V) |
| Pino 186 | GND — Ground |
| Pino 187 | VCC — Core power supply (1.5V) |
| Pino 188 | GND — Ground |
| Pino 189 | VCC — Core power supply (1.5V) |
| Pino 190 | GND — Ground |
| Pino 191 | VCC — Core power supply (1.5V) |
| Pino 192 | GND — Ground |
| Pino 193 | VCC — Core power supply (1.5V) |
| Pino 194 | GND — Ground |
| Pino 195 | VCC — Core power supply (1.5V) |
| Pino 196 | GND — Ground |
| Pino 197 | VCC — Core power supply (1.5V) |
| Pino 198 | GND — Ground |
| Pino 199 | VCC — Core power supply (1.5V) |
| Pino 200 | GND — Ground |
| Pino 201 | VCC — Core power supply (1.5V) |
| Pino 202 | GND — Ground |
| Pino 203 | VCC — Core power supply (1.5V) |
| Pino 204 | GND — Ground |
| Pino 205 | VCC — Core power supply (1.5V) |
| Pino 206 | GND — Ground |
| Pino 207 | VCC — Core power supply (1.5V) |
| Pino 208 | GND — Ground |
Aplicações típicas
A3P600-2PQ208I é adequado para 6 aplicaçãos: Industrial Control, Automotive Electronics, Communications Infrastructure, Consumer Electronics, Medical Devices, Aerospace and Defense.
Industrial Control
The A3P600-2PQ208I is ideal for industrial control systems requiring reliable, reprogrammable logic. Its 600K gates and 154 I/O pins can implement motor control, PLC interfaces, and sensor processing. The flash-based architecture ensures instant-on operation and high reliability in harsh environments. With support for 3.3V, 2.5V, and 1.8V I/O, it interfaces easily with industrial sensors and actuators. The -2 speed grade provides the performance needed for real-time control loops. Its non-volatile configuration eliminates the need for external boot memory, simplifying design and reducing BOM cost. The device operates over -40C to +100C, suitable for industrial temperature ranges. For safety-critical applications, the flash-based design offers immunity to configuration upsets. Overall, it provides a flexible, cost-effective solution for mid-density industrial logic.
Recomendado
Automotive Electronics
In automotive electronics, the A3P600-2PQ208I provides a reprogrammable platform for body control modules, infotainment interfaces, and driver assistance systems. Its 600K gates enable implementation of communication protocols like CAN and LIN, while the 154 I/O pins connect to various sensors and actuators. The flash-based architecture offers high reliability and instant-on capability, critical for automotive safety. The device supports I/O voltages compatible with automotive logic levels. Its wide operating temperature range (-40C to +100C) meets automotive requirements. The -2 speed grade ensures timely processing of real-time data. The non-volatile configuration reduces system complexity and improves security against unauthorized copying. For automotive designs, the A3P600-2PQ208I offers a balance of performance, reliability, and cost, making it a suitable choice for mid-density logic applications.
Recomendado
Communications Infrastructure
The A3P600-2PQ208I is well-suited for communications infrastructure, including base stations, routers, and switches. Its 600K gates can implement packet processing, protocol conversion, and interface bridging. The 154 I/O pins support various high-speed interfaces like LVDS and HSTL. The flash-based architecture provides low power consumption and high reliability, essential for 24/7 operation. The -2 speed grade enables high-throughput data paths. With support for multiple I/O voltages, it interfaces with different logic families. The device's reprogrammability allows field upgrades and protocol updates. Its non-volatile configuration ensures quick power-up, minimizing downtime. For communications equipment, the A3P600-2PQ208I offers a flexible, cost-effective solution for mid-density logic, enabling rapid development and deployment.
Recomendado
Consumer Electronics
In consumer electronics, the A3P600-2PQ208I can be used in smart home devices, gaming peripherals, and multimedia systems. Its 600K gates provide ample logic for user interface control, data processing, and connectivity. The 154 I/O pins connect to displays, buttons, and sensors. The flash-based architecture offers instant-on and low power consumption, ideal for battery-powered devices. The -2 speed grade supports responsive user interfaces. With support for 1.8V, 2.5V, and 3.3V I/O, it interfaces with various consumer ICs. The device's reprogrammability allows firmware updates and feature enhancements. Its small 208-pin PQFP package is suitable for compact designs. For consumer products, the A3P600-2PQ208I provides a flexible, low-cost solution for implementing custom logic without ASIC development costs.
Recomendado
Medical Devices
The A3P600-2PQ208I is suitable for medical devices such as patient monitors, diagnostic equipment, and imaging systems. Its 600K gates can implement signal processing, data acquisition, and control logic. The 154 I/O pins interface with sensors, ADCs, and displays. The flash-based architecture provides high reliability and instant-on, critical for medical safety. The device operates over -40C to +100C, covering medical temperature ranges. The -2 speed grade enables real-time processing of biological signals. With support for multiple I/O voltages, it connects to various medical ICs. The non-volatile configuration ensures secure and reliable operation. For medical applications, the A3P600-2PQ208I offers a reprogrammable, cost-effective solution for mid-density logic, reducing time-to-market and enabling design flexibility.
Recomendado
Aerospace and Defense
In aerospace and defense, the A3P600-2PQ208I provides a reliable, reprogrammable FPGA for avionics, radar, and communication systems. Its 600K gates can implement signal processing, encryption, and interface control. The 154 I/O pins support various military-grade interfaces. The flash-based architecture offers immunity to radiation-induced configuration upsets, making it suitable for space applications. The device operates over a wide temperature range and is available in industrial temperature grades. The -2 speed grade provides the performance needed for real-time processing. Its non-volatile configuration ensures secure and instant operation. For defense applications, the A3P600-2PQ208I offers a balance of performance, reliability, and security, making it a preferred choice for mid-density logic in harsh environments.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para A3P600-2PQ208I — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | A3P600-PQG208I | A3P600-1PQG208I | A3P600-2PQG208I |
|---|---|---|---|---|
| Package | 208-PQFP (28x28 mm) | 208-PQFP (28x28 mm) - same | 208-PQFP (28x28 mm) - same | 208-PQFP (28x28 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Speed Grade | -2 | Standard | -1 | -2 |
| Temperature Range | Industrial (-40C to +100C) | Industrial (-40C to +100C) | Industrial (-40C to +100C) | Industrial (-40C to +100C) |
| System Gates | 600000 | 600000 | 600000 | 600000 |
| RAM Bits | 110592 | 110592 | 110592 | 110592 |
| Number of I/O | 154 | 154 | 154 | 154 |
| Core Voltage | 1.5V | 1.5V | 1.5V | 1.5V |
Principais diferenciais
- Higher speed grade (-2) for performance-critical designs (vs A3P600-PQG208I)
- Industrial temperature range for harsh environments (vs A3P600-2PQG208)
- Flash-based non-volatile configuration (vs SRAM-based FPGAs)
Notas de projeto
The A3P600-2PQ208I requires a 1.5V core supply and separate I/O supplies (1.8V, 2.5V, or 3.3V). Use low-ESR ceramic capacitors (0.1uF and 10uF) placed close to each VCC and VCCIBx pin. Ensure adequate decoupling to prevent voltage droop during high-speed switching. Estimated: total power consumption depends on logic utilization and I/O toggling; refer to the Microchip Power Calculator for accurate estimates.
For the 208-pin PQFP package, use a multi-layer PCB with dedicated power and ground planes. Route high-speed signals with controlled impedance and minimize trace lengths. Provide a solid ground plane under the device to reduce noise. Follow the layout guidelines in the ProASIC3 datasheet for optimal signal integrity.
Ensure all VCC and GND pins are connected; do not leave any power pins floating. Verify that I/O bank voltages match the connected logic levels. Avoid exceeding the absolute maximum ratings for input voltages. For reprogramming, use the recommended programming interface and ensure the device is properly powered during configuration.
Informações de conformidade
RoHS compliant per distributor listings. AEC-Q100 not applicable for FPGA. Other compliance details not specified in provided data.