Analog Devices

ADF4350BCPZ-RL7 - 4.4 GHz Fractional-N PLL | Analog Devices

N.º da peça: ADF4350BCPZ-RL7 ✓ Ativo
32-WFQFN exposed pad, CSP Package 4.4 GHz Speed
MOQ: 1 |

ADF4350BCPZ-RL7 Visão geral

The Analog Devices ADF4350BCPZ-RL7 is a fractional-N or integer-N phase-locked-loop frequency synthesizer with an integrated voltage-controlled oscillator, designed for RF signal generation up to 4.4 GHz. The device accepts an external reference frequency and uses an external loop filter, allowing the synthesizer bandwidth, output frequency, and channel spacing to be configured for the target system. It is packaged in a 32-lead WFQFN exposed-pad CSP and specified for operation from -40°C to +85°C.

A phase-locked loop is a feedback-controlled oscillator used to generate a stable output frequency from a reference signal. In the broader device hierarchy, the ADF4350BCPZ-RL7 is a clock-and-timing IC, specifically a PLL frequency synthesizer with an integrated VCO. Fractional-N operation divides the reference frequency by an integer value plus a programmable fraction, supporting fine frequency increments without requiring a high reference frequency. Integer-N mode provides a conventional integer divider path.

The principal features of this synthesizer include support for both fractional-N and integer-N architectures, an integrated VCO, an external reference input, and programmable frequency synthesis through a serial interface. The 4.4 GHz upper operating frequency makes the device suitable for radio-frequency front ends, test equipment, instrumentation, and communication modules whose local oscillator or clock source must be adjustable over a wide frequency range. The exposed thermal pad supports heat transfer from the IC to the PCB copper area.

The ADF4350BCPZ-RL7 uses a phase detector, programmable divider chain, charge-pump output, and integrated VCO to close the PLL loop. An external passive loop filter connects the charge pump to the VCO control input and determines major loop dynamics. Designers therefore need to select filter components for the intended reference frequency, division ratios, phase-noise requirement, and settling time rather than treating the loop filter as a fixed accessory.

Typical applications include wireless transceiver local oscillators, RF test and measurement instruments, frequency-generating test equipment, industrial RF control modules, and communication infrastructure. The device is especially appropriate when one synthesizer platform must cover several output frequencies and the system can configure the frequency through its digital control interface. It can also support integer-N use cases where fractional channel spacing is unnecessary.

PCB implementation requires careful treatment of the RF output, reference input, ground return paths, supply decoupling, and exposed-pad thermal design. Place the loop-filter components close to the charge-pump and VCO-control pins, connect the exposed pad to a properly sized ground plane, and follow the manufacturer's package and evaluation-board layout recommendations to preserve RF performance and phase-noise behavior.

This page combines the product identity, package information, purchasing guidance, application analysis, and drop-in-family comparisons in a form designed for rapid engineering review. It also identifies when an ADF4350BCPZ-family device can simplify a design without requiring a different board footprint.

Alternativas drop-in para ADF4350BCPZ-RL7 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com ADF4350BCPZ-RL7 (mesmo formato e footprint) — diferindo em Package, Device Type, Operating Temperature Range, Architecture, Loop Filter.

Analog Devices
Package: 24-lead WFQFN with exposed pad
Device Type: Fractional-N and integer-N RF frequency synthesizer
Architecture: Phase-locked loop with integrated dividers
Comparar com ADF4350BCPZ-RL7 →
Analog Devices
Package: 24-lead WFQFN with exposed pad
Architecture: External-VCO phase-locked loop
Loop Filter: External loop filter required
Comparar com ADF4350BCPZ-RL7 →
Analog Devices
Package: 32-lead WFQFN with exposed pad, 4 mm x 4 mm
Device Type: Wideband fractional-N/integer-N PLL frequency synthesizer
Comparar com ADF4350BCPZ-RL7 →
Analog Devices
Package: 32-LFCSP (5 mm x 5 mm) with exposed pad
Operating Temperature Range: -40C to +85C
Comparar com ADF4350BCPZ-RL7 →
Analog Devices
Device Type: Fractional-N and integer-N RF frequency synthesizer
Loop Filter: External loop filter required
Comparar com ADF4350BCPZ-RL7 →
Analog Devices
Package: 32-lead LFCSP with exposed pad
Device Type: Fractional-N or integer-N frequency synthesizer with integrated VCO
Operating Temperature Range: -40 °C to +85 °C
Comparar com ADF4350BCPZ-RL7 →

ADF4350BCPZ-RL

✅ Drop-In
Analog Devices
📦 32-WFQFN exposed pad, CSP
Fractional-N and integer-N RF frequency synthesizer · Phase-locked loop with integrated VCO · 2200 MHz to 4400 MHz · 4.4 GHz · 137.5 MHz · Divide-by-1, divide-by-2, divide-by-4, divide-by-8, or divide-by-16 · External reference frequency · External loop filter required

Consulte o preço

Ver ficha técnica →

ADF4350BCPZ

✅ Drop-In
Analog Devices
📦 32-WFQFN exposed pad, CSP
137.5 MHz to 4400 MHz · 2200 MHz to 4400 MHz · Fractional-N / Integer-N PLL · Up to 32 MHz (typical) · Divide-by-1/2/4/8/16 · Sub-Hz resolution

Consulte o preço

Ver ficha técnica →

ADF4350ABCPZ

✅ Drop-In
Analog Devices
📦 32-WFQFN exposed pad, CSP
Wideband fractional-N/integer-N PLL frequency synthesizer · 2200 MHz to 4400 MHz · 137.5 MHz to 4400 MHz · 4.4 GHz · 137.5 MHz · Fractional-N and integer-N · Divide by 1, 2, 4, 8, or 16 · Pin-controllable and software-controllable

Consulte o preço

Ver ficha técnica →

ADF4350BCPZ-RL7 Especificações

Product Type Fractional-N and Integer-N PLL frequency synthesizer with integrated VCO
Maximum Synthesized Frequency 4.4 GHz
PLL Modes Fractional-N and Integer-N
VCO Integration Integrated
Reference Input External reference frequency
Loop Filter External
Faixa de temperatura de operação -40°C to +85°C
Encapsulamento 32-WFQFN exposed pad, CSP
Lead Count 32 leads
Tipo de montagem Surface mount

Guia de Configuração de Pinos do ADF4350BCPZ-RL7 32-wfqfn exposed pad, csp

Configuração de pinos para ADF4350BCPZ-RL7 (pacote 32-wfqfn exposed pad, csp). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 32-wfqfn exposed pad, csp para ADF4350BCPZ-RL7

Nenhum dado detalhado de pinagem disponível para ADF4350BCPZ-RL7.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

ADF4350BCPZ-RL7 é adequado para 6 aplicaçãos: RF Test Signal Source, Wireless Transceiver Local Oscillator, Frequency Calibration Instrument, Industrial RF Control Module, RF Communication Module, Laboratory Frequency Generator.

📡

RF Test Signal Source

The ADF4350BCPZ-RL7 fits programmable RF test equipment because it synthesizes frequencies up to 4.4 GHz and supports both fractional-N and integer-N operating modes. A fixed external reference establishes accuracy, while an external loop filter closes the phase-locked loop and must be designed for the selected division ratios and settling requirements. This gives an instrument designer one adjustable local-oscillator source instead of several fixed-frequency oscillators. Final suitability depends on the phase-noise, spurious-signal, output-power, and settling-time limits of the test specification.

🌐

Wireless Transceiver Local Oscillator

The ADF4350BCPZ-RL7 can generate a programmable local oscillator for RF transceiver chains requiring carrier tuning through 4.4 GHz. Fractional-N operation provides fine output-frequency increments from an external reference, while integer-N mode supports simpler divider ratios. The synthesizer is placed behind the RF output matching network and controlled through its serial interface. The external loop filter remains central to phase-noise and settling performance, so it must be calculated from the actual reference frequency, divider settings, and channel plan.

🖥️

Frequency Calibration Instrument

The ADF4350BCPZ-RL7 is appropriate for calibration systems that require a tunable reference or local oscillator rather than a fixed crystal source. Its 4.4 GHz upper synthesized frequency supports RF calibration points across wide bands, and fractional-N division permits closely spaced test frequencies. In this arrangement, the external reference determines absolute stability, while the PLL loop filter shapes spectral performance and acquisition time. Use the manufacturer evaluation-board layout as a starting point for controlled impedance routing and exposed-pad thermal construction.

🏭

Industrial RF Control Module

Industrial RF modules can use the ADF4350BCPZ-RL7 to create an adjustable carrier for sensing, telemetry, or communication subcircuits. The integrated VCO reduces the number of external frequency-generation components, and the -40°C to +85°C operating range supports many industrial environments. The design still requires a stable external reference, a calculated loop filter, suitable RF output matching, and a PCB that effectively couples the WFQFN exposed pad to ground. Firmware can select fractional-N or integer-N configurations to balance resolution and loop behavior.

📶

RF Communication Module

The ADF4350BCPZ-RL7 is suited to communication modules that need a digitally controlled oscillator with output frequencies up to 4.4 GHz. Fractional-N synthesis allows multiple closely spaced channels without requiring a reference frequency equal to every desired output, while integer-N operation can simplify selected channel plans. The synthesizer's output is conditioned by the PCB reference network and loop filter before entering the RF chain. Designers should evaluate lock range, reference feedthrough, phase noise, and spurs under the final divider and filter configurations.

🔧

Laboratory Frequency Generator

The ADF4350BCPZ-RL7 can serve as the tunable RF core of a laboratory frequency generator covering frequencies through 4.4 GHz. Its programmable fractional-N and integer-N modes allow one synthesizer platform to support multiple output plans. A high-quality external reference contributes frequency accuracy, while the external loop filter and careful RF layout determine phase noise and spurious performance. The exposed-pad package also requires an uninterrupted thermal path and low-impedance ground connection. Final calibration and output-level control should be validated with the complete reference and filtering chain.

What is the ADF4350BCPZ-RL7?
The ADF4350BCPZ-RL7 is a 4.4 GHz fractional-N and integer-N PLL frequency synthesizer with an integrated voltage-controlled oscillator from Analog Devices. According to the manufacturer product page, it implements a PLL when paired with an external loop filter and external reference frequency. The device is offered in a 32-lead WFQFN exposed-pad CSP package and operates from -40°C to +85°C.
What are the key specifications of ADF4350BCPZ-RL7 that engineers should know?
The key specifications of the ADF4350BCPZ-RL7 are its 4.4 GHz maximum synthesized frequency, fractional-N and integer-N operation, integrated VCO, external reference input, and external loop-filter requirement. Analog Devices identifies the device as a clock and frequency synthesizer in a 32-WFQFN exposed-pad CSP package. Its specified operating-temperature range is -40°C to +85°C.
Where can I download the ADF4350BCPZ datasheet PDF?
The official ADF4350BCPZ datasheet is available through the Analog Devices product page at https://www.analog.com/en/products/adf4350.html. That page provides the manufacturer datasheet and product information for the ADF4350 family, including the integrated-VCO fractional-N and integer-N architecture, external loop-filter requirement, and external reference input.
Where can I find the ADF4350BCPZ-RL7 pinout?
The ADF4350BCPZ-RL7 pinout is published in the pin-description table in the Analog Devices ADF4350 datasheet. The component uses a 32-lead WFQFN exposed-pad CSP package, so board designers should map every supply, ground, control, RF, and exposed-pad connection directly from that table. Use the package drawing and land pattern together to confirm orientation and pad geometry.
How do I choose between fractional-N and integer-N mode on the ADF4350BCPZ-RL7?
Choose fractional-N mode when the required output frequency must be divided by an integer-plus-fraction value and fine channel spacing is important. Choose integer-N mode when the divider ratio is an integer and the application does not require fractional frequency offsets. Analog Devices identifies support for both modes as a principal ADF4350 feature, with the loop filter designed for the selected reference and feedback ratios.
What reference and loop-filter components does the ADF4350BCPZ-RL7 need?
The ADF4350BCPZ-RL7 requires an external reference frequency and an external loop filter to complete the PLL implementation. The reference establishes the synthesizer's frequency accuracy and stability, while the loop filter connects the charge-pump output to the VCO control path and influences phase noise, settling behavior, and loop stability. Component values should be calculated for the actual divider ratios and performance targets.
What is the best drop-in replacement for ADF4350BCPZ-RL7?
The closest documented family alternatives are ADF4350BCPZ-RL and ADF4350ABCPZ, both in the 32-lead LFCSP/WFQFN-class package associated with the ADF4350BCPZ family. Their order-code suffixes identify different packaging or temperature-grade choices, so engineers should verify the specific suffix, temperature range, and production configuration before approving a substitution.
Can ADF4350BCPZ-RL replace ADF4350BCPZ-RL7 on the same PCB?
ADF4350BCPZ-RL is identified as a pin-compatible ADF4350BCPZ-family alternative, making it the closest documented drop-in candidate for ADF4350BCPZ-RL7. Compatibility still depends on matching the complete order code, temperature grade, package suffix, and required production configuration. Confirm those details against the manufacturer ordering guide before placing an order.
What can replace ADF4350BCPZ-RL7?
ADF4350BCPZ-RL and ADF4350ABCPZ are the documented drop-in-family replacements for the ADF4350BCPZ-RL7. Both use the same family footprint and preserve the core fractional-N or integer-N synthesizer with integrated VCO. They are not interchangeable without checking suffix-specific temperature, packaging, and qualification requirements.
Is ADF4350BCPZ-RL7 suitable for RF test and measurement equipment?
The ADF4350BCPZ-RL7 is suitable for programmable RF signal sources because it combines a 4.4 GHz synthesized-frequency capability with fractional-N and integer-N modes. It can provide the local oscillator or tunable reference used by instruments, although final phase noise, spur, settling-time, and output-power performance must be evaluated against the test specification using the appropriate loop filter and reference source.
ADF4350BCPZ-RL7 vs ADF4350ABCPZ-RL7: which is better for a new design?
Choose ADF4350BCPZ-RL7 when the required order code and temperature grade match the original design, and choose ADF4350ABCPZ-RL7 only after confirming its suffix-specific electrical and qualification details. The ADF4350ABCPZ is documented as a pin-compatible family variant, but a drop-in footprint does not guarantee that every temperature, packaging, or lifecycle requirement is identical.
When should I choose ADF4350BCPZ-RL7 over another PLL frequency synthesizer?
Choose the ADF4350BCPZ-RL7 when a design needs an integrated VCO, fractional-N and integer-N operation, and synthesis up to 4.4 GHz in a 32-lead surface-mount package. It is a strong fit for adjustable RF test sources and communication modules. Choose another synthesizer when its phase noise, spur performance, supply architecture, output driver, or software ecosystem better matches the system requirement.
How much power does the ADF4350BCPZ-RL7 dissipate?
The exact power dissipation depends on supply voltage, output frequency, VCO settings, output power, and operating temperature. The verified product listing identifies the 32-WFQFN exposed-pad package but does not provide a complete electrical table. Use the manufacturer power-consumption and thermal information for the selected operating mode, then verify the junction-temperature margin with the PCB thermal model.
Where can I buy ADF4350BCPZ-RL7 online and what is its price?
Use the Request a Quote form on this page to request current ADF4350BCPZ-RL7 pricing, stock, and lead time. The listing identifies a 4.4 GHz fractional-N and integer-N PLL frequency synthesizer in a 32-WFQFN exposed-pad CSP package. Commercial terms can change by quantity and procurement status, so obtain a current quotation for the exact order code.
Is ADF4350BCPZ-RL7 in stock and what is the lead time?
Request current stock, minimum order quantity, and lead time through the Request a Quote form on this page. The product is identified as an Analog Devices 4.4 GHz fractional-N and integer-N PLL frequency synthesizer with an integrated VCO. The confirmed order code is ADF4350BCPZ-RL7, which includes the package and temperature-grade suffix needed for procurement.

Dados de referência de engenharia para ADF4350BCPZ-RL7 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose ADF4350BCPZ-RL7 when the design needs a 4.4 GHz programmable RF source with fractional-N and integer-N modes, an integrated VCO, and the confirmed -RL7 order configuration. Choose ADF4350BCPZ-RL when it meets the required temperature, packaging, and qualification requirements and you want the closest documented family alternative. Choose ADF4350BCPZ when the base order code satisfies the production and environmental requirements. Consider ADF4350ABCPZ when its -A-specific ordering details are acceptable for the intended deployment. All three documented alternatives retain the 32-lead family footprint, but they are not automatically interchangeable: verify the complete order code, temperature grade, lifecycle status, and qualification. For any choice, calculate the external loop filter for the actual reference and divider ratios, and preserve the manufacturer reference layout for exposed-pad grounding, decoupling, and RF routing.

Comparação com alternativas

Parâmetro Este produto ADF4350BCPZ-RL ADF4350BCPZ ADF4350ABCPZ
Package 32-WFQFN exposed pad, CSP 32-WFQFN exposed pad, CSP 32-WFQFN exposed pad, CSP 32-WFQFN exposed pad, CSP
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Maximum Synthesized Frequency 4.4 GHz 4.4 GHz 4.4 GHz 4.4 GHz
PLL Modes Fractional-N and Integer-N Fractional-N and Integer-N Fractional-N and Integer-N Fractional-N and Integer-N
VCO Integration Integrated Integrated Integrated Integrated
Reference Input External External External External
Loop Filter External External External External

Principais diferenciais

  • Supports fractional-N and integer-N operation in one device (vs ADF4350BCPZ-RL)
  • Uses an integrated VCO with an external loop filter (vs ADF4350BCPZ)
  • Pin-compatible family footprint supports targeted redesigns (vs ADF4350ABCPZ)

Notas de projeto

Use the Analog Devices EVAL-ADF4350 layout as the reference for component placement and routing. Keep the external loop-filter network close to the charge-pump and VCO-control pins, minimize loop area, and preserve a continuous ground reference beneath the device. The 32-lead WFQFN exposed pad should connect to the ground plane through a dense via array and short thermal path to support reliable operation across the -40°C to +85°C range.

Separate the external reference path from the RF output and sensitive loop-filter nodes, and use controlled-impedance routing where the board stackup permits. Provide local supply and ground decoupling at the device pins with very short return paths. Avoid routing high-current or switching-supply traces beneath the VCO and reference sections, because coupling into these paths can degrade phase noise and increase reference feedthrough.

Do not select a replacement by footprint alone. The ADF4350BCPZ-RL, ADF4350BCPZ, and ADF4350ABCPZ order codes share the family package, but the suffix can affect temperature grade, packaging, qualification, or lifecycle configuration. Check the manufacturer ordering guide, confirm the complete MPN, and verify the external loop-filter design because changing reference or divider values can materially alter lock behavior and spectral performance.

Treat the external reference and loop filter as part of the complete synthesizer signal chain. Reference noise, supply ripple, ground impedance, and charge-pump ripple all influence phase noise and lock behavior. Validate the design with the intended reference source and divider ratios, and compare measured lock range and settling time against the application requirement before releasing the PCB layout.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Compliance status is not stated in the confirmed product-page and listing information. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals documentation for the exact order code with the manufacturer before qualification.

Dados verificados em: 2026-11-20 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

adf4350bcpz datasheet ADF4350BCPZ-RL7 datasheet PDF ADF4350BCPZ-RL7 pinout ADF4350BCPZ-RL7 4.4 GHz ADF4350BCPZ-RL7 fractional-N PLL ADF4350BCPZ-RL7 equivalent ADF4350BCPZ-RL7 replacement ADF4350BCPZ-RL7 footprint Analog Devices ADF4350BCPZ-RL7 ADF4350BCPZ-RL7 price ADF4350BCPZ-RL7 stock ADF4350BCPZ vs ADF4350ABCPZ

Componentes & termos relacionados

Analog Devices ADF4350BCPZ-RL7 ADF4350BCPZ-RL ADF4350BCPZ ADF4350ABCPZ ADF4350 EVAL-ADF4350 phase-locked loop PLL frequency synthesizer clock and timing IC fractional-N synthesizer integer-N synthesizer integrated voltage-controlled oscillator VCO charge pump external loop filter external reference frequency 32-WFQFN CSP package exposed pad RF signal generation phase noise frequency divider surface-mount semiconductor
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ