ADS5542IPAPRG4 - 14-Bit 80MSPS ADC | Texas Instruments
N.º da peça: ADS5542IPAPRG4 ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $28.5 | $28,50 |
| 10 | $25.2 | $252,00 |
| 100 | $22.1 | $2.210,00 |
| 500 | $19.4 | $9.700,00 |
| 1.000 | $17.25 | $17.250,00 |
ADS5542IPAPRG4 Visão geral
An analog-to-digital converter is a semiconductor component that converts continuous-time analog signals into discrete digital codes at a defined sample rate, enabling downstream digital signal processing (DSP), storage, or transmission. ADCs sit within the data-converter (ADC/DAC) tier of the mixed-signal IC hierarchy, which itself belongs to the broader integrated-circuit (semiconductor) taxonomy and is used in virtually every signal-acquisition system. Within this family, the ADS5542IPAPRG4 is a high-speed, high-resolution pipeline ADC optimized for intermediate-frequency (IF) and baseband digitization.
Key differentiating specifications include 14-bit resolution, 80 MSPS maximum sample rate, internal voltage reference (eliminating external reference components), single 3.3 V supply operation, and 2.3 VPP differential full-scale input range. The device integrates internal references and offers low differential nonlinearity, making it suitable for wide-bandwidth signal chains.
The architecture is a multi-stage pipeline with digital error correction, providing excellent linearity across the operating temperature range (-40 °C to +85 °C industrial). The HTQFP-64 package with exposed thermal pad (PowerPAD) keeps junction temperatures manageable under the 554 mW analog power budget. Internal reference and trimmed scaling reduce BOM count and improve channel-to-channel matching in multi-channel systems.
Typical applications include medical imaging front-ends, communications IF sampling, basestation receive paths, test-and-measurement digitizers, and high-end CCD/CIS imaging. Its 80 MSPS rate and 100 MHz analog input bandwidth also suit software-defined-radio (SDR) and quadrature-demodulation architectures.
When designing with the ADS5542IPAPRG4, drive the inputs with a fully differential amplifier such as the THS4503 or OPA695 to realize the rated SFDR, and follow the datasheet's recommended decoupling and PCB stack-up to preserve SNR. The exposed thermal pad must be soldered to a sufficiently large ground copper pour for the 554 mW dissipation.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers rapidly evaluate the ADS5542IPAPRG4 for new designs and second-source decisions.
Alternativas drop-in para ADS5542IPAPRG4 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
Nenhuma alternativa drop-in disponível para este produto.
Solicitar alternativasADS5542IPAPRG4 Classificações máximas e características elétricas
| Resolução | 14 bits |
| Sample Rate | 80 MSPS |
| Number of Input Channels | 1 (differential) |
| Differential Input Voltage Range | 2.3 VPP |
| Analog Supply Voltage | 3.3 V (single) |
| Analog Power Dissipation | 554 mW (typical) |
| Voltage Reference | Internal |
| Faixa de temperatura de operação | -40 °C to +85 °C (industrial) |
| Encapsulamento | 64-HTQFP (PAP) PowerPAD, 10x10 mm |
| Tipo de montagem | Surface Mount |
| Nível MSL | 2 (per JEDEC J-STD-020) |
| Status RoHS | Compliant (G4 suffix, Pb-free) |
| Terminal Form | GULL WING |
| Linear Error (proxy) | 0.0305% (per partstack listing) |
Guia de Configuração de Pinos do ADS5542IPAPRG4 64-htqfp (pap) powerpad, 10x10 mm
Configuração de pinos para ADS5542IPAPRG4 (pacote 64-htqfp (pap) powerpad, 10x10 mm). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.
Nenhum dado detalhado de pinagem disponível para ADS5542IPAPRG4.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
ADS5542IPAPRG4 é adequado para 7 aplicaçãos: Medical Imaging Front-End, Communications IF Sampling, Test & Measurement Digitizer, CCD / CIS Imaging Array Digitizer, Radar & Lidar Signal Acquisition, Industrial Process Control & Data Acquisition, Software-Defined-Radio (SDR) Baseband.
Medical Imaging Front-End
The ADS5542IPAPRG4's 14-bit resolution and 80 MSPS sample rate make it well-suited to medical imaging front-ends, particularly in ultrasound beamformers and pre-beam-formed RF capture. The high SFDR at 100 MHz input preserves harmonic-free imaging and ensures diagnostic accuracy across the clinical frequency range, while the 2.3 VPP differential input range directly interfaces with TI's THS4503 / OPA695 fully differential drivers. The 554 mW analog dissipation is manageable on a 4-layer FR-4 board with proper thermal via arrays under the PowerPAD. For portable cart-based ultrasound, the internal voltage reference eliminates an external REF component and reduces BOM cost.
Recomendado
Communications IF Sampling
In cellular basestation and software-defined-radio receivers, the ADS5542IPAPRG4 directly samples intermediate-frequency (IF) signals up to 100 MHz, eliminating analog downconversion stages. Its 14-bit dynamic range quantifies multi-carrier UMTS / LTE signals with sufficient headroom for crest-factor variation, and the pipeline architecture ensures deterministic latency for synchronous demodulation. Designers pair it with TI's GC5322 digital up/down converters or DSP families such as TMS320C66x. The 3.3 V single supply simplifies power-tree design and supports hot-swap line-card architectures.
Recomendado
Test & Measurement Digitizer
High-end oscilloscopes, spectrum analyzers, and arbitrary waveform digitizers leverage the ADS5542IPAPRG4 for its 80 MSPS throughput, 14-bit resolution, and wide input bandwidth. Real-time sampling at 80 MSPS captures transient events with sub-microsecond resolution, and the differential input minimizes common-mode noise from switching power stages inside the instrument. TI recommends pairing it with the THS4631 wideband FET-input amplifier for high-impedance probes, and the LMK03806 clock conditioner for low-jitter sampling. The HTQFP-64 PowerPAD package fits standard 6U CompactPCI digitizer boards.
Recomendado
CCD / CIS Imaging Array Digitizer
Industrial and scientific CCD / CMOS image sensors output analog pixel streams at sample rates that align with the ADS5542IPAPRG4's 80 MSPS. The 14-bit resolution delivers 16384 grayscale levels, sufficient for machine-vision inspection and medical microscopy. The internal voltage reference guarantees stable conversion across the full -40 °C to +85 °C industrial range, and the differential input rejects coupled digital switching noise from adjacent FPGA image-processing logic. Designers pair it with TI's LM98519 CCD driver and a Spartan-6 / Kintex-7 FPGA for real-time image processing.
Recomendado
Radar & Lidar Signal Acquisition
Automotive and industrial radar front-ends, plus scanning-lidar receivers, use the ADS5542IPAPRG4 to digitize baseband or low-IF chirp returns. Its 14-bit dynamic range supports long-range detection while preserving close-in resolution, and the 80 MSPS rate covers typical chirp bandwidths up to 40 MHz. For 76-81 GHz automotive radar the part is widely used in pre-production designs; consult TI for AEC-Q100 qualified variants for production vehicles. Pair with TI's AWR1642 / AWR1843 radar SoC family or dedicated DSP post-processing.
Recomendado
Industrial Process Control & Data Acquisition
Process-control DAQ cards and vibration-monitoring modules use the ADS5542IPAPRG4 to sample multi-channel sensor arrays with synchronized 80 MSPS throughput. The industrial -40 °C to +85 °C operating range suits outdoor cabinets and factory-floor enclosures, and the 3.3 V single-supply operation simplifies PLC backplane design. Combined with the AMC1204 isolated delta-sigma modulator and TMS320F2838x MCU, designers build full-condition-monitoring systems meeting IEC 61850 and IEEE 1613 substation standards.
Recomendado
Software-Defined-Radio (SDR) Baseband
Wideband SDR receivers from VHF through 6 GHz rely on high-performance 14-bit ADCs at the IF stage; the ADS5542IPAPRG4's 80 MSPS rate supports up to 40 MHz of instantaneous bandwidth with 14-bit dynamic range, sufficient for capturing multi-protocol waveforms. Its LVCMOS digital interface directly feeds Xilinx / Altera FPGAs running open-source GNU Radio toolchains. The HTQFP-64 footprint aligns with standard SDR mezzanine cards and aligns with the OBSAI / CPRI baseband interfaces used in cellular infrastructure.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para ADS5542IPAPRG4 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | ADS5542IPAPR | ADS5542IPAP | ADS5543IPAPR |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 64-HTQFP (PAP) PowerPAD | 64-HTQFP (PAP) - same | 64-HTQFP (PAP) - same | 64-HTQFP (PAP) - same |
| Resolution | 14 bits | 14 bits | 14 bits | 14 bits |
| Sample Rate | 80 MSPS | 80 MSPS | 80 MSPS | 105 MSPS |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Differential Input Range | 2.3 VPP | 2.3 VPP | 2.3 VPP | 2.3 VPP |
| Voltage Reference | Internal | Internal | Internal | Internal |
| Operating Temperature | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C |
| Pb-Free (RoHS) Suffix | Yes (G4) | No (legacy finish) | No (base part) | No (legacy finish) |
Principais diferenciais
- Pb-Free (G4) Roaming-Compliant Suffix (vs ADS5542IPAPR)
- Same-package 80 MSPS baseline in TI ADS5542 family (vs ADS5543IPAPR)
- Internal voltage reference eliminates external components (vs ADS5424 (external reference competitor))
Notas de projeto
Place the input coupling capacitors, common-mode bias resistors, and clock decoupling capacitors within 5 mm of their pins, and stitch the exposed PowerPAD to a continuous ground copper pour on the top layer plus an array of thermal vias (at least 9 vias in a 3x3 pattern, 0.3 mm drill) to inner ground. For optimum performance, use a 4-layer FR-4 stack-up with dedicated analog and digital ground planes tied at a single point near the ADC. Reference the TI ADS5542 datasheet layout example and the application note MT-095 for high-speed ADC PCB guidelines.
Drive the analog input with a fully differential amplifier such as the THS4503 or OPA695, configured for 2.3 VPP differential output with a 0.9 V common-mode bias. Maintain symmetric trace lengths (mismatch <0.5 mm) and 100 ohm differential impedance; route clock and analog inputs on separate layers with no parallel digital traces. Use an ultra-low-jitter clock source such as LMK04828 or LMK03806 with <100 fs RMS jitter to preserve SNR at 100 MHz input frequency.
Power the 3.3 V analog rail from an ultra-low-noise LDO such as TPS7A4701, post-filtered with 10 uF + 0.1 uF ceramic capacitors at the ADC supply pin. Decouple digital output supply separately with its own LDO (e.g. TPS7A45xx) to prevent digital switching noise from coupling into the analog rail. The 554 mW analog dissipation requires a 25 mm x 25 mm ground copper pour minimum to keep junction temperature rise below 30 °C above ambient at industrial temperatures.
Do not float the PowerPAD - the ADS5542IPAPRG4's thermal and electrical ground reference depends on it being soldered to a continuous ground plane; floating it will cause thermal runaway and degraded performance. Do not exceed 3.6 V on the analog supply or apply a single-ended clock - the LVCMOS/CMOS clock input requires clean 3.3 V CMOS levels with 50 ohm series termination at the source. Avoid long input traces; use matched-length differential pairs and AC-couple the input with 0.1 uF ceramic capacitors per the datasheet.
Informações de conformidade
G4 suffix indicates Pb-free RoHS-compliant per TI nomenclature. Halogen-free status not found in provided data - marked unknown. Not AEC-Q100; for automotive radar, consult TI's Q100-qualified ADS variants.
