Texas Instruments

DS90C363MTDX - 18-Bit 65MHz LVDS FPD-Link Transmitter | Texas Instruments

N.º da peça: DS90C363MTDX ✓ Ativo
3.3 V Vdss 48-pin TSSOP Package 65 MHz Speed
MOQ: 1 |

DS90C363MTDX Visão geral

The Texas Instruments DS90C363MTDX is a 3.3 V programmable LVDS transmitter for 18-bit flat-panel display links, operating at up to 65 MHz and incorporating an 18-bit parallel data interface, low-voltage differential signaling, and a 48-pin TSSOP package. The interface supports a reported data rate of 1,300 Mbps, making it intended for high-speed pixel transmission between graphics processing and display timing circuitry.

An LVDS transmitter is a semiconductor interface device that converts parallel digital data into low-voltage differential signals. Differential signaling represents each bit with two complementary conductors, reducing sensitivity to common-mode noise and allowing reliable high-speed communication over board-level interconnects. In the broader hierarchy, the DS90C363MTDX belongs to the LVDS transmitter class, flat-panel display interface family, interface IC category, and semiconductor product category.

The key features of this device include an 18-bit programmable data width, a 65 MHz operating specification, a 3.3 V supply, and FPD-Link operation. These characteristics allow the transmitter to carry display pixel data while reducing the number of interconnects required by conventional single-ended parallel signaling. Its 48-terminal TSSOP package also provides a compact surface-mount implementation for display-controller and interface boards.

The transmitter is designed for parallel-to-differential conversion in flat-panel display systems. Its architecture accepts digital pixel information and serializes it onto an LVDS link, while the receiver and display timing system recover the transmitted data at the opposite end. The reported 1,300 Mbps data rate corresponds to the high-speed serialized link capability, whereas the 18-bit input width describes the parallel pixel payload presented to the transmitter.

Typical uses include digital flat-panel monitors, industrial display controllers, automotive display interfaces, medical display equipment, video-processing systems, and embedded graphics platforms. It is particularly appropriate when a system requires an LVDS FPD-Link transmitter rather than a generic low-speed differential driver, and when the source device must transfer an 18-bit pixel bus into a compact high-speed differential channel.

The primary layout consideration is placement of the transmitter close to the LVDS output connector and the source graphics logic. Keep the differential pair routed as a controlled-impedance pair, minimize stub lengths, and follow the manufacturer's pin-description and reference-layout guidance. Confirm output timing, receiver compatibility, connector pin assignment, and panel-specific initialization requirements before releasing a production design.

This product record combines manufacturer identification, package and interface specifications, sourcing guidance, application fit, and a constrained drop-in comparison. It also highlights the important distinction between the 18-bit parallel payload, the 65 MHz operating point, and the 1,300 Mbps serialized LVDS link so engineers can evaluate bandwidth, board constraints, and receiver interoperability consistently.

Alternativas drop-in para DS90C363MTDX — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com DS90C363MTDX (mesmo formato e footprint) — diferindo em Product Type.

Texas Instruments
Product Type: Programmable LVDS FPD-Link transmitter
Comparar com DS90C363MTDX →

DS90C363MTD

✅ Drop-In
Texas Instruments
📦 48-pin TSSOP
Programmable LVDS FPD-Link transmitter · 3 V to 3.6 V · 3.3 V · 18 bits · 65 MHz · 1300 Mbps · 0.45 V · 3 drivers

Consulte o preço

Ver ficha técnica →

DS90C363MTDX Especificações

Product Type Programmable LVDS transmitter
Tensão de alimentação 3.3 V
Data Width 18 bit
Frequência máxima de clock 65 MHz
Serialized Data Rate 1,300 Mbps
Interface Standard FPD-Link
Logic Voltage 0.45 V
Package Type 48-pin TSSOP
Terminal Count 48 terminals
Terminal Form Gull wing
Mounting Technology Surface mount
Temperature Grade Industrial

Guia de Configuração de Pinos do DS90C363MTDX 48-pin tssop

Configuração de pinos para DS90C363MTDX (pacote 48-pin tssop). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 48-pin tssop para DS90C363MTDX

Nenhum dado detalhado de pinagem disponível para DS90C363MTDX.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

DS90C363MTDX é adequado para 6 aplicaçãos: Digital Flat-Panel Monitor Interface, Industrial Display Controller, Automotive Display Link, Medical Diagnostic Display, Video Processing System, Embedded Graphical Control Panel.

📺

Digital Flat-Panel Monitor Interface

The DS90C363MTDX fits a digital flat-panel monitor that receives parallel pixel data from a graphics controller and requires a compact LVDS link. Its 18-bit parallel input matches the identified pixel payload, while the 65 MHz operating specification supports the associated display timing. Placing the transmitter close to the source logic reduces routing burden, and the reported 1,300 Mbps link rate provides the throughput needed for FPD-Link transmission. The display engine, timing generator, connector, and receiver must remain synchronized to the same clock and initialization sequence.

🏭

Industrial Display Controller

Industrial display systems benefit from the DS90C363MTDX because it combines an 18-bit parallel input with a high-speed differential output in a 48-pin TSSOP package. The 3.3 V interface level supports integration with compatible digital display-controller logic, and the 65 MHz specification provides a defined timing target for pixel-clock design. Use controlled-impedance routing for the LVDS pair and verify panel timing margins across temperature, power-supply tolerance, and cable length before production.

🚗

Automotive Display Link

The DS90C363MTDX can support compatible automotive display architectures that use an 18-bit FPD-Link transmitter and 3.3 V interface. Its 65 MHz operating specification and reported 1,300 Mbps serialized rate suit high-resolution display links, while the TSSOP package simplifies board assembly. The final design must confirm the applicable automotive qualification for the exact orderable variant, as well as display power sequencing, transient immunity, cable construction, connector retention, and operation over the complete vehicle temperature range.

💊

Medical Diagnostic Display

A medical diagnostic display can use the DS90C363MTDX when the display controller requires an 18-bit parallel pixel input and a compact high-speed LVDS output. The 65 MHz operating point and 1,300 Mbps reported link rate provide a clear bandwidth basis for interface timing, while differential signaling can reduce sensitivity to common-mode noise in multi-board systems. Designers must still validate image timing, isolation requirements, grounding, cable routing, fault behavior, and regulatory requirements for the complete display system rather than the transmitter alone.

🎥

Video Processing System

The DS90C363MTDX is applicable inside a video-processing system that converts an 18-bit parallel pixel stream into an FPD-Link LVDS transmission for a downstream display. Its 3.3 V operation and defined 65 MHz timing allow the transmitter to be placed at the output boundary of an image-processing pipeline. Account for pipeline latency when defining display timing, and verify that all source signals meet the electrical requirements before serialization. A short, impedance-controlled differential route directly to the connector improves implementation predictability.

🧩

Embedded Graphical Control Panel

Embedded graphical control panels can use the DS90C363MTDX when their controller exposes an 18-bit pixel bus and the selected screen accepts compatible FPD-Link signaling. The device combines a 3.3 V supply, 65 MHz operating specification, and 48-pin TSSOP package for a compact panel-link implementation. Integration should include a deliberate startup sequence, defined clock generation, receiver compatibility checks, and connector pin verification. Differential trace geometry, ground continuity, and enclosure grounding require system-level review to preserve signal integrity.

What is the DS90C363MTDX?
The DS90C363MTDX is a 3.3 V, programmable 18-bit LVDS transmitter designed for flat-panel display links. According to the Texas Instruments DS90C363 product page and manufacturer datasheet, it operates at up to 65 MHz, uses FPD-Link signaling, and is packaged in a 48-pin TSSOP. It converts parallel display data into a high-speed differential LVDS link for electronic displays.
What is the difference between an 18-bit input and the 1,300 Mbps link rate?
The 18-bit specification describes the parallel pixel-data width accepted by the transmitter, while 1,300 Mbps describes the serialized differential link rate reported for the device. According to the Texas Instruments product documentation, the DS90C363MTDX also supports operation up to 65 MHz. These are related but distinct parameters: one describes bus width, one describes clock frequency, and the third describes link bandwidth.
Where can I download the DS90C363MTDX datasheet PDF?
The official DS90C363MTDX datasheet is available through the Texas Instruments document link at https://www.ti.com/lit/gpn/ds90c363. The manufacturer datasheet is the preferred document for the complete pin-description table, timing diagrams, electrical characteristics, initialization procedure, and recommended application layout. The Texas Instruments product page at https://www.ti.com/product/DS90C363 provides ordering, product, and support information.
Where can I find the DS90C363MTDX pinout?
The DS90C363MTDX pin assignment is defined in the pin-description table and package drawing within the Texas Instruments DS90C363 manufacturer datasheet. Use the 48-pin TSSOP drawing to identify physical pin 1, power terminals, data inputs, control inputs, and differential outputs. Do not infer signal positions from the package outline alone, because power and ground terminals determine how the interface must be connected.
Is the DS90C363MTDX suitable for an LCD monitor?
Yes, the DS90C363MTDX is suitable for systems requiring an 18-bit FPD-Link LVDS transmitter, including compatible digital flat-panel displays. Its 3.3 V supply, 65 MHz operating specification, 18-bit parallel input, and 48-pin TSSOP package align with display-controller and interface-board designs. Compatibility still depends on the panel's supported input data width, clock range, connector pinout, timing, and initialization sequence.
Can DS90C363MTD replace DS90C363MTDX without a PCB change?
The DS90C363MTD is the closest documented same-family ordering option for the DS90C363MTDX and uses the same 48-pin TSSOP interface family. Both listings identify the device as the 18-bit, 3.3 V, 65 MHz FPD-Link transmitter, so the electrical function and footprint appear aligned. Procurement must still confirm the exact orderable suffix, reel or tray form, and receiver compatibility before treating it as a production substitution.
When should I choose DS90C363MTDX instead of a generic LVDS transmitter?
Choose the DS90C363MTDX when the design specifically requires an 18-bit FPD-Link transmitter with a 65 MHz operating specification and a 48-pin TSSOP footprint. A generic LVDS transmitter may provide differential outputs but not the same pixel width, serialization behavior, control interface, or display timing. The DS90C363MTDX is therefore better suited to a compatible flat-panel display architecture than an unverified general-purpose line driver.
What can replace the DS90C363MTDX?
The closest supported replacement candidate is the DS90C363MTD from Texas Instruments because it is identified as the same 18-bit, 3.3 V, 65 MHz FPD-Link transmitter family in a 48-pin TSSOP package. No independently documented cross-brand, pin-compatible substitute was established. Treat the replacement as conditional on verification of pin functions, ordering suffix, timing limits, panel initialization, and the required shipping form.
Is DS90C363MTDX the same as DS90C363MTD?
The DS90C363MTDX and DS90C363MTD are closely related orderable versions of the same Texas Instruments 18-bit FPD-Link transmitter. Both are identified as 3.3 V devices supporting up to 65 MHz in 48-pin TSSOP packages. Their ordering suffixes can represent different commercial or packing forms, so engineers should compare the manufacturer ordering information rather than assuming every shipment format is interchangeable.
Where can I buy DS90C363MTDX online?
Use the Request a Quote form on this page to request DS90C363MTDX pricing, current availability, lot traceability, and lead time. The request should specify the 48-pin TSSOP package and the DS90C363MTDX orderable suffix. This approach avoids substituting a different packing code or electrical grade without written confirmation from the manufacturer.
What is the price of DS90C363MTDX?
Current DS90C363MTDX pricing is not stated because market pricing can change with quantity, date, and shipment configuration. Submit the Request a Quote form on this page for the exact orderable MPN, required quantity, and target shipping form. The request should preserve the DS90C363MTDX suffix so the quotation is not based on a different package, reel, or tray configuration.
What is the lead time for DS90C363MTDX?
The current DS90C363MTDX lead time must be confirmed for the requested quantity and commercial terms. Use the Request a Quote form on this page and state the required quantity, standard or expedited shipment, and acceptable ship date. This is particularly important when production schedules depend on a specific 48-pin TSSOP shipping form rather than a loose or alternative packing option.
Is DS90C363MTDX in stock?
Current DS90C363MTDX stock status should be confirmed through the Request a Quote form on this page. The component is listed by Texas Instruments as a 48-pin TSSOP device, but that identification alone does not establish a deliverable lot at the requested quantity. Include your required date and quantity in the request so allocation can be matched to the production schedule.
What are the key specifications of DS90C363MTDX that engineers should know?
The DS90C363MTDX is a 3.3 V, 18-bit programmable LVDS transmitter with a 65 MHz operating specification and a reported 1,300 Mbps serialized link rate. It uses FPD-Link signaling and comes in a 48-pin TSSOP package. According to the Texas Instruments product page and manufacturer datasheet, these are the principal distinctions to check against the target display, source controller, connector, and receiver.
Does the DS90C363MTDX require a compatible LVDS receiver?
Yes, the DS90C363MTDX must operate with a receiver and display system that support compatible FPD-Link signaling, data timing, and initialization. The transmitter's 18-bit parallel payload and 65 MHz operating point do not by themselves guarantee panel interoperability. Verify input mapping, serial link rate, clock tolerance, power sequencing, connector wiring, and receiver capabilities before production release.

Dados de referência de engenharia para DS90C363MTDX — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the DS90C363MTDX when the display architecture requires an 18-bit, 3.3 V FPD-Link transmitter with a 65 MHz operating point and a 48-pin TSSOP footprint. It is well matched to digital flat-panel monitors, industrial displays, embedded control panels, and compatible automotive or medical display systems. The DS90C363MTD is the closest documented same-family ordering alternative because it has the same manufacturer, interface description, supply voltage, operating frequency, and package family; confirm the suffix and shipping requirements before using it as a drop-in procurement option. No independently documented cross-brand drop-in was established, so a different-manufacturer substitute should not be selected solely from similar LVDS headline specifications. A different transmitter may require different data width, clocking, control logic, pin assignments, initialization, or package dimensions. For either device, final selection depends on panel compatibility, receiver support, timing margin, board layout, and qualification requirements.

Comparação com alternativas

Parâmetro Este produto DS90C363MTD
Brand Texas Instruments Texas Instruments
Package 48-pin TSSOP 48-pin TSSOP
Product Type Programmable LVDS transmitter Programmable LVDS transmitter
Supply Voltage 3.3 V 3.3 V
Data Width 18 bit 18 bit
Maximum Clock Frequency 65 MHz 65 MHz
Interface Standard FPD-Link FPD-Link

Principais diferenciais

  • Combines an 18-bit parallel interface with a 1,300 Mbps serialized LVDS link (vs DS90C363MTD)
  • Uses a 48-pin TSSOP surface-mount interface package (vs DS90C363MTD)
  • Designed specifically for programmable flat-panel display transmission (vs DS90C363MTD)

Notas de projeto

Route the LVDS differential pair as a controlled-impedance pair from the DS90C363MTDX outputs to the display connector. Minimize vias, branch stubs, and changes in reference-plane geometry. Keep the pair away from switching-power nodes and high-slew-rate clock traces. Obtain the manufacturer's reference layout and package pin table before assigning the connector because the physical power, ground, control, and differential-output positions must match the selected board design.

Follow the manufacturer's recommended input, output, and bypass-capacitor arrangement for the 3.3 V supply and each supply terminal. Place high-frequency bypass capacitance close to the device's power pins and keep the return path continuous. Validate supply tolerance, startup sequencing, and voltage levels at the pins because the transmitter converts parallel data into a differential link only when the source and receiver timing remain synchronized.

Verify the 18-bit source timing, pixel-clock relationship, and LVDS receiver requirements before enabling the link. The 65 MHz operating specification and reported 1,300 Mbps serialized rate should be used as design checks rather than assumed guarantees for every panel combination. Review rise and fall times, clock jitter, skew between data and clock, connector loss, and cable length with the receiver and panel vendors.

Do not select the device solely because both parts are described as 48-pin TSSOP transmitters. Confirm the exact ordering suffix, pin functions, initialization requirements, receiver compatibility, and shipping form before releasing a replacement order. Also distinguish the 18-bit parallel payload from the 65 MHz clock specification and the 1,300 Mbps serialized link rate; using these parameters interchangeably can produce timing errors or an incorrect bandwidth estimate.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The manufacturer product page and distributor listings do not explicitly state the requested compliance fields for this orderable MPN. Verify them on the Texas Instruments product page or in the manufacturer datasheet before regulated production release.

Dados verificados em: 2026-11-10 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

DS90C363MTDX datasheet DS90C363MTDX pinout DS90C363MTDX datasheet pdf DS90C363MTDX specifications DS90C363MTDX equivalent DS90C363MTDX replacement DS90C363MTDX cross reference DS90C363MTDX footprint DS90C363MTDX application circuit Texas Instruments DS90C363MTDX DS90C363MTDX price DS90C363MTDX stock DS90C363MTDX vs DS90C363MTD 18-bit LVDS FPD-Link transmitter 48-TSSOP LVDS transmitter

Componentes & termos relacionados

Texas Instruments DS90C363MTDX DS90C363MTD DS90C387VJD-TI DS90CR213MTD DS90CF562MTD LVDS transmitter low-voltage differential signaling FPD-Link flat-panel display interface interface IC semiconductor 18-bit parallel data 65 MHz clock 1,300 Mbps data rate 3.3 V supply 48-pin TSSOP TSSOP package family surface mount differential pair controlled impedance display timing pixel data serialized link signal integrity
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ