DSPIC33FJ128GP206AT-I/PT - 16-bit 40MIPS DSC 128KB Flash | Microchip
N.º da peça: DSPIC33FJ128GP206AT-I/PT ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $6.12 | $6,12 |
| 10 | $5.72 | $57,20 |
| 100 | $5.31 | $531,00 |
| 500 | $4.95 | $2.475,00 |
| 1.000 | $4.6 | $4.600,00 |
DSPIC33FJ128GP206AT-I/PT Visão geral
A digital signal controller combines the deterministic control of a microcontroller with the numeric throughput of a DSP. In the product hierarchy, the dsPIC33F sits between general-purpose MCUs (such as the PIC18) and dedicated DSPs, integrating a 16-bit modified Harvard architecture core with DSP engine features - a 17-bit x 17-bit single-cycle hardware multiplier, dual 40-bit accumulators, and a barrel shifter supporting fixed-point arithmetic - making it a natural single-chip choice for digital control loops and signal processing.
Key features include a 16-bit RISC core executing up to 40 MIPS, an 18-channel 10-bit/12-bit analog-to-digital converter capable of up to 500 ksps for multi-channel sensor acquisition, and the GP-series communication suite: multiple UART, SPI, and I2C modules plus the ECAN (CAN 2.0B) controller required in industrial networks and automotive-adjacent systems. Flash is self-programmable for field firmware updates, and the device supports In-Circuit Serial Programming (ICSP) and debugging via any PGECx/PGEDx pin pair.
The modified Harvard architecture keeps instruction and data buses separate, allowing simultaneous fetch of instruction and operands, which underpins the single-cycle MAC (multiply-accumulate) operation essential to digital filters and PID loops. Peripheral Pin Select (PPS) on this family gives designers flexibility to map digital peripherals onto 53 I/O pins, simplifying PCB routing. The industrial temperature grade (-40C to +85C) and tape-and-reel packaging support automated high-volume assembly.
Typical applications include motor control (BLDC, PMSM FOC), digital power supplies and inverters, industrial automation sensing nodes, and audio signal processing where the ADC-DSP-DAC chain processes signals deterministically.
Design consideration: the device requires a stable 3.0 V-3.6 V rail; take care that ECAN transceivers and ADC reference integrity justify dedicated low-noise supply decoupling at each VDD/VSS pair.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Alternativas drop-in para DSPIC33FJ128GP206AT-I/PT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com DSPIC33FJ128GP206AT-I/PT (mesmo formato e footprint) — diferindo em Package, Core Architecture, Programming Interface, Operating Temperature, RoHS Status.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
DSPIC33FJ128GP206A-I/PT
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
DSPIC33FJ128GP206T-I/PT
✅ Drop-In✓ Em estoque
$4.89 / unidade
Ver ficha técnica →DSPIC33FJ128GP206AT-E/PT
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
DSPIC33FJ128GP206AT-I/PT Classificações máximas e características elétricas
| Core | dsPIC33F 16-bit |
| MIPS | 40 MIPS |
| Flash Program Memory | 128 KB (128K x 8) |
| RAM | 8 KB (8K x 8) |
| I/O Pins | 53 |
| Operating Voltage | 3.0 V to 3.6 V |
| ADC | 18-channel 10-bit/12-bit |
| Encapsulamento | 64-TQFP (10x10 mm) |
| Terminal Pitch | 0.5 mm |
| Tipo de montagem | Surface Mount |
| Temperatura de operação | -40C to +85C (Industrial) |
| Technology | CMOS |
| DSP Features | 17x17 hardware multiplier, barrel shifter, fixed-point DSP engine |
| Communication Interfaces | UART, SPI, I2C, ECAN (CAN 2.0B) |
| Programming | ICSP (PGECx/PGEDx pairs) |
| Packaging | Tape & Reel (T&R) |
Guia de Configuração de Pinos do DSPIC33FJ128GP206AT-I/PT 64-tqfp (10x10 mm)
Configuração de pinos para DSPIC33FJ128GP206AT-I/PT (pacote 64-tqfp (10x10 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para DSPIC33FJ128GP206AT-I/PT.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
DSPIC33FJ128GP206AT-I/PT é adequado para 6 aplicaçãos: Motor Control (BLDC / PMSM FOC), Digital Power Supplies and Inverters, Industrial Automation and Sensing Nodes, Audio and Speech Signal Processing, Embedded Control with CAN Networking (ECAN), Test, Measurement and Instrumentation.
Motor Control (BLDC / PMSM FOC)
The DSPIC33FJ128GP206AT-I/PT is purpose-built for digital motor control: its 40 MIPS 16-bit DSP engine with a 17x17 single-cycle hardware multiplier and dual 40-bit accumulators executes field-oriented control (FOC) algorithms for BLDC and PMSM motors with deterministic loop timing. The 18-channel 10-bit/12-bit ADC samples phase currents and the DC bus at high speed, feeding current-loop bandwidths in the several-kHz range. With 53 I/O pins and ECAN on-board, the same chip can drive a three-phase inverter and report telemetry on a CAN network. Place it between current-sense conditioning and the gate-driver stage; the fixed-point DSP core adds no switching jitter compared to a software-only MCU solution.
Recomendado
Digital Power Supplies and Inverters
In digitally controlled AC/DC and DC/DC power stages, the DSPIC33FJ128GP206AT-I/PT closes voltage and current loops at high update rates using its 40 MIPS core and hardware MAC, implementing average-current-mode or peak-current-mode control in firmware. The high-speed 18-channel ADC samples output voltage, inductor current, and temperature simultaneously, while PWM peripherals generate the switching waveforms. The 3.0 V-3.6 V supply range matches standard controller rails, and the ECAN module enables PMBus-style supervision in parallel inverter systems. Compared to analog-only control, the DSP approach allows soft-start profiles, non-linear gain scheduling, and firmware upgradability via the self-programmable 128 KB Flash.
Recomendado
Industrial Automation and Sensing Nodes
Factory automation nodes benefit from the DSC's combination of analog acquisition and industrial networking: the 18-channel ADC digitizes multiple sensors (pressure, temperature, position) through a single controller, DSP routines perform filtering and linearization in firmware, and the ECAN controller plus multiple UART/SPI/I2C modules connect the node to PLC backplanes and HMI panels. The -40C to +85C industrial temperature rating and 53 configurable I/O with Peripheral Pin Select simplify routing on crowded PCBs. Running PID and FFT-based condition-monitoring on the 40 MIPS core removes the need for a separate signal-processor chip, cutting BOM cost in high-volume sensor and actuator modules.
Recomendado
Audio and Speech Signal Processing
The GP-series dsPIC33F excels in embedded audio: its single-cycle MAC and barrel shifter execute FIR/IIR filters, sample-rate converters, and speech codecs at 40 MIPS, while the 12-bit ADC digitizes microphone inputs for voice-band processing. With 128 KB of Flash, codec tables and coefficient sets reside on-chip, and the 8 KB RAM buffers multiple audio frames for block processing. UART/I2C interfaces connect to external audio codecs or DACs. Designers should budget the ADC resolution (up to 12-bit) for voice-quality rather than hi-fi applications, and use the DSP X/Y memory architecture to sustain overlapped MAC operations without pipeline stalls.
Recomendado
Embedded Control with CAN Networking (ECAN)
For nodes that must live on a CAN 2.0B bus - automotive-adjacent accessories, medical carts, building controllers - the on-chip ECAN module of the DSPIC33FJ128GP206AT-I/PT provides full CAN 2.0B compliance with hardware message buffering, offloading the 40 MIPS core from bit-level protocol handling. Multiple UARTs, SPI, and I2C modules bridge legacy sensors into the CAN network, and Peripheral Pin Select lets the designer place ECAN and UART pins optimally for PCB layout across the 53 I/O. Firmware updates over the bus are practical because the 128 KB Flash is self-programmable, enabling field maintenance without physical access.
Recomendado
Test, Measurement and Instrumentation
Bench instruments and portable measurement tools use the DSPIC33FJ128GP206AT-I/PT as a real-time acquisition engine: the 18-channel ADC captures multiple signals for simultaneous sampling, DSP firmware performs averaging, windowing, and FFT analysis on the 40 MIPS core, and results stream over UART/USB-bridge UART links to a host. The self-programmable Flash supports calibration data storage and firmware feature updates in the field, while the industrial temperature grade suits both lab and factory-floor instruments. Designers should allocate low-noise 3.3 V decoupling per VDD/VSS pair to preserve the ADC's effective resolution, and use the multiple PGECx/PGEDx pairs for production programming on assembled boards.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para DSPIC33FJ128GP206AT-I/PT — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | DSPIC33FJ128GP206A-I/PT | DSPIC33FJ128GP206T-I/PT | DSPIC33FJ128GP206AT-E/PT |
|---|---|---|---|---|
| Package | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core / MIPS | dsPIC33F 16-bit / 40 MIPS | dsPIC33F 16-bit / 40 MIPS | dsPIC33F 16-bit / 40 MIPS | dsPIC33F 16-bit / 40 MIPS |
| Flash / RAM | 128 KB / 8 KB | 128 KB / 8 KB | 128 KB / 8 KB | 128 KB / 8 KB |
| Operating Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Temperature Grade | Industrial (-40C to +85C) | Industrial (-40C to +85C) | Industrial (-40C to +85C) | Extended (higher ceiling) |
| Silicon Revision / Errata | AT revision | Latest A revision (errata fixed) | Non-A revision (per FindIC) | AT revision, extended temp |
| I/O / ADC | 53 I/O / 18-ch 10/12-bit | 53 I/O / 18-ch 10/12-bit | 53 I/O / 18-ch 10/12-bit | 53 I/O / 18-ch 10/12-bit |
Principais diferenciais
- Latest silicon revision with errata fixes (vs DSPIC33FJ128GP206T-I/PT)
- Extended-temperature option at identical footprint (vs DSPIC33FJ128GP206AT-E/PT)
- DSP engine differentiates from plain MCUs (vs DSPIC33FJ128GP206A-I/PT)
Notas de projeto
Supply the device from a single 3.0 V-3.6 V rail (nominal 3.3 V). Estimated: a 40 MIPS dsPIC33FJ draws on the order of 40-60 mA plus I/O load, so a 100 mA-class LDO such as the MCP1702 with 1 uF ceramic capacitors at every VDD/VSS pair is a workable baseline. If the ADC is used for precision sampling, add an RC or ferrite filter between the digital rail and AVDD to preserve effective resolution.
The 64-TQFP has a 0.5 mm pitch - specify a 4-mil (0.1 mm) minimum solder-mask opening and follow IPC-compliant land patterns for the 10x10 mm footprint. Place 100 nF decoupling capacitors within 2-3 mm of each VDD pin pair, and keep the ECAN/UART routing away from the ADC analog traces. Expose a solid ground plane on layer 2 to minimize return-path loops for the 40 MHz system clock.
Programming requires matched PGECx/PGEDx pairs - per Microchip documentation, the dsPIC33FJ128GP206 has more than one pair and any pair may be used, but ICSPCLK and ICSPDAT must come from the same pair (e.g., PGEC2 with PGED2). Mixing pins from different pairs is a common bring-up failure. Also note this is a 3.3 V device: never drive its I/O directly from 5 V logic without level translation, and verify the silicon errata sheet for your exact revision before production.
Informações de conformidade
RoHS/lead-free status inferred from standard Microchip current-production packaging and distributor listings; REACH and halogen-free status not stated in the provided data.
