DSPIC33FJ128GP206AT-I/PT - 16-bit 40MIPS DSC 128KB Flash | Microchip
料号： DSPIC33FJ128GP206AT-I/PT ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $6.12 | $6.12 |
| 10 | $5.72 | $57.20 |
| 100 | $5.31 | $531.00 |
| 500 | $4.95 | $2,475.00 |
| 1,000 | $4.6 | $4,600.00 |
DSPIC33FJ128GP206AT-I/PT 概述
A digital signal controller combines the deterministic control of a microcontroller with the numeric throughput of a DSP. In the product hierarchy, the dsPIC33F sits between general-purpose MCUs (such as the PIC18) and dedicated DSPs, integrating a 16-bit modified Harvard architecture core with DSP engine features - a 17-bit x 17-bit single-cycle hardware multiplier, dual 40-bit accumulators, and a barrel shifter supporting fixed-point arithmetic - making it a natural single-chip choice for digital control loops and signal processing.
Key features include a 16-bit RISC core executing up to 40 MIPS, an 18-channel 10-bit/12-bit analog-to-digital converter capable of up to 500 ksps for multi-channel sensor acquisition, and the GP-series communication suite: multiple UART, SPI, and I2C modules plus the ECAN (CAN 2.0B) controller required in industrial networks and automotive-adjacent systems. Flash is self-programmable for field firmware updates, and the device supports In-Circuit Serial Programming (ICSP) and debugging via any PGECx/PGEDx pin pair.
The modified Harvard architecture keeps instruction and data buses separate, allowing simultaneous fetch of instruction and operands, which underpins the single-cycle MAC (multiply-accumulate) operation essential to digital filters and PID loops. Peripheral Pin Select (PPS) on this family gives designers flexibility to map digital peripherals onto 53 I/O pins, simplifying PCB routing. The industrial temperature grade (-40C to +85C) and tape-and-reel packaging support automated high-volume assembly.
Typical applications include motor control (BLDC, PMSM FOC), digital power supplies and inverters, industrial automation sensing nodes, and audio signal processing where the ADC-DSP-DAC chain processes signals deterministically.
Design consideration: the device requires a stable 3.0 V-3.6 V rail; take care that ECAN transceivers and ADC reference integrity justify dedicated low-noise supply decoupling at each VDD/VSS pair.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
直接替换替代料： DSPIC33FJ128GP206AT-I/PT ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： DSPIC33FJ128GP206AT-I/PT （相同外形与封装尺寸） ——差异在于 Package, Core Architecture, Programming Interface, Operating Temperature, RoHS Status.
快速对比工具——选择替代料号进行并排对比：
DSPIC33FJ128GP206A-I/PT
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
DSPIC33FJ128GP206T-I/PT
✅ 直接替换✓ 有现货
$4.89 / 个
查看数据手册 →DSPIC33FJ128GP206AT-E/PT
✅ 直接替换📋 参考替代料（不在目录中）
DSPIC33FJ128GP206AT-I/PT 最大额定值与电气特性
| Core | dsPIC33F 16-bit |
| MIPS | 40 MIPS |
| Flash Program Memory | 128 KB (128K x 8) |
| RAM | 8 KB (8K x 8) |
| I/O Pins | 53 |
| Operating Voltage | 3.0 V to 3.6 V |
| ADC | 18-channel 10-bit/12-bit |
| 封装 | 64-TQFP (10x10 mm) |
| Terminal Pitch | 0.5 mm |
| 安装类型 | Surface Mount |
| 工作温度 | -40C to +85C (Industrial) |
| Technology | CMOS |
| DSP Features | 17x17 hardware multiplier, barrel shifter, fixed-point DSP engine |
| Communication Interfaces | UART, SPI, I2C, ECAN (CAN 2.0B) |
| Programming | ICSP (PGECx/PGEDx pairs) |
| Packaging | Tape & Reel (T&R) |
DSPIC33FJ128GP206AT-I/PT 64-tqfp (10x10 mm) 引脚配置指南
DSPIC33FJ128GP206AT-I/PT（64-tqfp (10x10 mm) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： DSPIC33FJ128GP206AT-I/PT.
请参阅 数据手册 以查看完整引脚配置。
典型应用
DSPIC33FJ128GP206AT-I/PT 适用于 6 应用s: Motor Control (BLDC / PMSM FOC), Digital Power Supplies and Inverters, Industrial Automation and Sensing Nodes, Audio and Speech Signal Processing, Embedded Control with CAN Networking (ECAN), Test, Measurement and Instrumentation.
Motor Control (BLDC / PMSM FOC)
The DSPIC33FJ128GP206AT-I/PT is purpose-built for digital motor control: its 40 MIPS 16-bit DSP engine with a 17x17 single-cycle hardware multiplier and dual 40-bit accumulators executes field-oriented control (FOC) algorithms for BLDC and PMSM motors with deterministic loop timing. The 18-channel 10-bit/12-bit ADC samples phase currents and the DC bus at high speed, feeding current-loop bandwidths in the several-kHz range. With 53 I/O pins and ECAN on-board, the same chip can drive a three-phase inverter and report telemetry on a CAN network. Place it between current-sense conditioning and the gate-driver stage; the fixed-point DSP core adds no switching jitter compared to a software-only MCU solution.
推荐
Digital Power Supplies and Inverters
In digitally controlled AC/DC and DC/DC power stages, the DSPIC33FJ128GP206AT-I/PT closes voltage and current loops at high update rates using its 40 MIPS core and hardware MAC, implementing average-current-mode or peak-current-mode control in firmware. The high-speed 18-channel ADC samples output voltage, inductor current, and temperature simultaneously, while PWM peripherals generate the switching waveforms. The 3.0 V-3.6 V supply range matches standard controller rails, and the ECAN module enables PMBus-style supervision in parallel inverter systems. Compared to analog-only control, the DSP approach allows soft-start profiles, non-linear gain scheduling, and firmware upgradability via the self-programmable 128 KB Flash.
推荐
Industrial Automation and Sensing Nodes
Factory automation nodes benefit from the DSC's combination of analog acquisition and industrial networking: the 18-channel ADC digitizes multiple sensors (pressure, temperature, position) through a single controller, DSP routines perform filtering and linearization in firmware, and the ECAN controller plus multiple UART/SPI/I2C modules connect the node to PLC backplanes and HMI panels. The -40C to +85C industrial temperature rating and 53 configurable I/O with Peripheral Pin Select simplify routing on crowded PCBs. Running PID and FFT-based condition-monitoring on the 40 MIPS core removes the need for a separate signal-processor chip, cutting BOM cost in high-volume sensor and actuator modules.
推荐
Audio and Speech Signal Processing
The GP-series dsPIC33F excels in embedded audio: its single-cycle MAC and barrel shifter execute FIR/IIR filters, sample-rate converters, and speech codecs at 40 MIPS, while the 12-bit ADC digitizes microphone inputs for voice-band processing. With 128 KB of Flash, codec tables and coefficient sets reside on-chip, and the 8 KB RAM buffers multiple audio frames for block processing. UART/I2C interfaces connect to external audio codecs or DACs. Designers should budget the ADC resolution (up to 12-bit) for voice-quality rather than hi-fi applications, and use the DSP X/Y memory architecture to sustain overlapped MAC operations without pipeline stalls.
推荐
Embedded Control with CAN Networking (ECAN)
For nodes that must live on a CAN 2.0B bus - automotive-adjacent accessories, medical carts, building controllers - the on-chip ECAN module of the DSPIC33FJ128GP206AT-I/PT provides full CAN 2.0B compliance with hardware message buffering, offloading the 40 MIPS core from bit-level protocol handling. Multiple UARTs, SPI, and I2C modules bridge legacy sensors into the CAN network, and Peripheral Pin Select lets the designer place ECAN and UART pins optimally for PCB layout across the 53 I/O. Firmware updates over the bus are practical because the 128 KB Flash is self-programmable, enabling field maintenance without physical access.
推荐
Test, Measurement and Instrumentation
Bench instruments and portable measurement tools use the DSPIC33FJ128GP206AT-I/PT as a real-time acquisition engine: the 18-channel ADC captures multiple signals for simultaneous sampling, DSP firmware performs averaging, windowing, and FFT analysis on the 40 MIPS core, and results stream over UART/USB-bridge UART links to a host. The self-programmable Flash supports calibration data storage and firmware feature updates in the field, while the industrial temperature grade suits both lab and factory-floor instruments. Designers should allocate low-noise 3.3 V decoupling per VDD/VSS pair to preserve the ADC's effective resolution, and use the multiple PGECx/PGEDx pairs for production programming on assembled boards.
推荐
推荐产品汇总
工程参考数据： DSPIC33FJ128GP206AT-I/PT ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | DSPIC33FJ128GP206A-I/PT | DSPIC33FJ128GP206T-I/PT | DSPIC33FJ128GP206AT-E/PT |
|---|---|---|---|---|
| Package | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core / MIPS | dsPIC33F 16-bit / 40 MIPS | dsPIC33F 16-bit / 40 MIPS | dsPIC33F 16-bit / 40 MIPS | dsPIC33F 16-bit / 40 MIPS |
| Flash / RAM | 128 KB / 8 KB | 128 KB / 8 KB | 128 KB / 8 KB | 128 KB / 8 KB |
| Operating Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Temperature Grade | Industrial (-40C to +85C) | Industrial (-40C to +85C) | Industrial (-40C to +85C) | Extended (higher ceiling) |
| Silicon Revision / Errata | AT revision | Latest A revision (errata fixed) | Non-A revision (per FindIC) | AT revision, extended temp |
| I/O / ADC | 53 I/O / 18-ch 10/12-bit | 53 I/O / 18-ch 10/12-bit | 53 I/O / 18-ch 10/12-bit | 53 I/O / 18-ch 10/12-bit |
关键差异点
- Latest silicon revision with errata fixes （对比 DSPIC33FJ128GP206T-I/PT)
- Extended-temperature option at identical footprint （对比 DSPIC33FJ128GP206AT-E/PT)
- DSP engine differentiates from plain MCUs （对比 DSPIC33FJ128GP206A-I/PT)
设计说明
Supply the device from a single 3.0 V-3.6 V rail (nominal 3.3 V). Estimated: a 40 MIPS dsPIC33FJ draws on the order of 40-60 mA plus I/O load, so a 100 mA-class LDO such as the MCP1702 with 1 uF ceramic capacitors at every VDD/VSS pair is a workable baseline. If the ADC is used for precision sampling, add an RC or ferrite filter between the digital rail and AVDD to preserve effective resolution.
The 64-TQFP has a 0.5 mm pitch - specify a 4-mil (0.1 mm) minimum solder-mask opening and follow IPC-compliant land patterns for the 10x10 mm footprint. Place 100 nF decoupling capacitors within 2-3 mm of each VDD pin pair, and keep the ECAN/UART routing away from the ADC analog traces. Expose a solid ground plane on layer 2 to minimize return-path loops for the 40 MHz system clock.
Programming requires matched PGECx/PGEDx pairs - per Microchip documentation, the dsPIC33FJ128GP206 has more than one pair and any pair may be used, but ICSPCLK and ICSPDAT must come from the same pair (e.g., PGEC2 with PGED2). Mixing pins from different pairs is a common bring-up failure. Also note this is a 3.3 V device: never drive its I/O directly from 5 V logic without level translation, and verify the silicon errata sheet for your exact revision before production.
合规信息
RoHS/lead-free status inferred from standard Microchip current-production packaging and distributor listings; REACH and halogen-free status not stated in the provided data.
