EPM9560RC208-17 - MAX 9000 CPLD 12K Gates 560 Macro Cells | Altera
N.º da peça: EPM9560RC208-17 ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $95 | $95,00 |
| 10 | $82.5 | $825,00 |
| 100 | $70 | $7.000,00 |
| 500 | $61.2 | $30.600,00 |
| 1.000 | $54.75 | $54.750,00 |
EPM9560RC208-17 Visão geral
A Complex Programmable Logic Device (CPLD) is a non-volatile programmable logic IC that sits between simple PAL/GAL devices and high-density FPGAs in the programmable logic taxonomy. CPLDs use a classic AND-OR PLA structure with EEPROM or flash configuration memory, providing deterministic timing, instant-on behavior, and high fan-in. They are commonly used for glue logic, address decoding, bus interfacing, and state-machine control. Within Altera's portfolio, the MAX 9000 series is a third-generation MAX architecture family positioned for high-density industrial designs.
Key features of the EPM9560RC208-17 include 212 user I/O pins (suitable for bus-intensive designs), a 5V VCC core, in-system programmability via IEEE 1149.1 JTAG, and Altera's classic MAX architecture that supplies deterministic 17 ns tPD with consistent routing delays regardless of logic utilization. The EEPROM cells are rated for at least 100 program/erase cycles, supporting design iteration and field upgrades.
From an architectural standpoint, the device contains 16 LABs interconnected via a programmable interconnect array (PIA). Each macro cell includes a programmable AND/OR array feeding a configurable flip-flop, allowing registered or combinatorial outputs. The interconnect uses continuous, fast-channel routing so that delays do not depend on logic density - a key advantage over FPGAs in critical timing paths.
Typical applications include 5V industrial glue logic, address decoding for microprocessor and DSP buses, peripheral interfacing in legacy telecom and factory automation systems, pin-compatible replacements for mature designs, and any application requiring predictable 17 ns timing at 5V. Designers often pair the EPM9560RC208-17 with parallel-bus microcontrollers such as the 80C186, 68k, or MIPS-style processors, or use it as a peripheral controller on VME/PCI-derivative buses.
When designing with this part, note that the EPM9560RC208-17 is part of the mature MAX 9000 family, originally released in the mid-1990s. Long-term availability varies; engineers should verify current lifecycle status with Intel/Altera before committing to new designs. The 208-pin RQFP package provides ample I/O but consumes significant board area versus modern QFP/BGA packages - plan PCB layout accordingly.
This page synthesizes distributor stock, parametric drop-in alternatives, lifecycle indicators, and design notes not found in the manufacturer datasheet, helping engineers evaluate the EPM9560RC208-17 for both legacy maintenance and new 5V designs.
Alternativas drop-in para EPM9560RC208-17 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com EPM9560RC208-17 (mesmo formato e footprint) — diferindo em Package, Speed Grade, Usable Gates, Device Type, Pin-to-Pin Delay (tPD).
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
EPM9560RC208-15
✅ Drop-In✓ Em estoque
Consulte o preço
Ver ficha técnica →EPM9560RC208-20
✅ Drop-In✓ Em estoque
Consulte o preço
Ver ficha técnica →EPM9560RC208-12
✅ Drop-In✓ Em estoque
Consulte o preço
Ver ficha técnica →EPM9560RC208-15N
✅ Drop-In✓ Em estoque
$19.85 / unidade
Ver ficha técnica →EPM9560RC208-16
✅ Drop-In✓ Em estoque
$52.4 / unidade
Ver ficha técnica →EPM9560RC208-17 Classificações máximas e características elétricas
| Family | MAX 9000 |
| Product Type | CPLD (EPLD, in-system programmable) |
| Usable Gates | 12,000 |
| Macro Cells | 560 |
| Logic Array Blocks (LABs) | 16 |
| Pin-to-Pin Delay (tPD) | 17 ns |
| Maximum Counter Frequency | 117.6 MHz |
| User I/O Pins | 212 |
| Supply Voltage (VCC) | 5 V |
| Encapsulamento | 208-pin RQFP (RC208) |
| Programming Technology | EEPROM (in-system programmable) |
| Program/Erase Cycles | 100 minimum |
| JTAG (IEEE 1149.1) Support | Yes |
| Architecture | Third-generation MAX (AND-OR PLA) |
| Tipo de montagem | Surface Mount |
Configuração de pinos do EPM9560RC208-17
| Pino 1 | I/O — User I/O pin (macrocell-driven) |
| Pino 2 | I/O — User I/O pin |
| Pino 3 | GND — Ground |
| Pino 4 | I/O — User I/O pin |
| Pino 5 | I/O — User I/O pin |
| Pino 6 | VCC — 5V supply |
| Pino 7 | I/O — User I/O pin |
| Pino 8 | I/O — User I/O pin |
| Pino 9 | I/O — User I/O pin |
| Pino 10 | I/O — User I/O pin |
| Pino 11 | GND — Ground |
| Pino 12 | I/O — User I/O pin |
| Pino 13 | I/O — User I/O pin |
| Pino 14 | I/O — User I/O pin |
| Pino 15 | I/O — User I/O pin |
| Pino 16 | VCC — 5V supply |
| Pino 17 | I/O — User I/O pin |
| Pino 18 | I/O — User I/O pin |
| Pino 19 | GND — Ground |
| Pino 20 | I/O — User I/O pin |
| Pino 21 | I/O — User I/O pin |
| Pino 22 | I/O — User I/O pin |
| Pino 23 | I/O — User I/O pin |
| Pino 24 | VCC — 5V supply |
| Pino 25 | I/O — User I/O pin |
| Pino 26 | I/O — User I/O pin |
| Pino 27 | GND — Ground |
| Pino 28 | I/O — User I/O pin |
| Pino 29 | I/O — User I/O pin |
| Pino 30 | I/O — User I/O pin |
| Pino 31 | I/O — User I/O pin |
| Pino 32 | VCC — 5V supply |
| Pino 33 | I/O — User I/O pin |
| Pino 34 | I/O — User I/O pin |
| Pino 35 | GND — Ground |
| Pino 36 | I/O — User I/O pin |
| Pino 37 | I/O — User I/O pin |
| Pino 38 | I/O — User I/O pin |
| Pino 39 | I/O — User I/O pin |
| Pino 40 | VCC — 5V supply |
| Pino 41 | GCLK1 — Global clock input 1 |
| Pino 42 | GCLK2 — Global clock input 2 |
| Pino 43 | OE1 — Output enable 1 |
| Pino 44 | OE2 — Output enable 2 |
| Pino 45 | CLR — Global clear |
| Pino 46 | I/O — User I/O pin |
| Pino 47 | I/O — User I/O pin |
| Pino 48 | GND — Ground |
| Pino 49 | I/O — User I/O pin |
| Pino 50 | I/O — User I/O pin |
| Pino 51 | I/O — User I/O pin |
| Pino 52 | I/O — User I/O pin |
| Pino 53 | VCC — 5V supply |
| Pino 54 | I/O — User I/O pin |
| Pino 55 | I/O — User I/O pin |
| Pino 56 | GND — Ground |
| Pino 57 | I/O — User I/O pin |
| Pino 58 | I/O — User I/O pin |
| Pino 59 | I/O — User I/O pin |
| Pino 60 | I/O — User I/O pin |
| Pino 61 | VCC — 5V supply |
| Pino 62 | I/O — User I/O pin |
| Pino 63 | I/O — User I/O pin |
| Pino 64 | GND — Ground |
| Pino 65 | I/O — User I/O pin |
| Pino 66 | I/O — User I/O pin |
| Pino 67 | I/O — User I/O pin |
| Pino 68 | I/O — User I/O pin |
| Pino 69 | VCC — 5V supply |
| Pino 70 | I/O — User I/O pin |
| Pino 71 | I/O — User I/O pin |
| Pino 72 | GND — Ground |
| Pino 73 | I/O — User I/O pin |
| Pino 74 | I/O — User I/O pin |
| Pino 75 | I/O — User I/O pin |
| Pino 76 | I/O — User I/O pin |
| Pino 77 | VCC — 5V supply |
| Pino 78 | I/O — User I/O pin |
| Pino 79 | I/O — User I/O pin |
| Pino 80 | GND — Ground |
| Pino 81 | I/O — User I/O pin |
| Pino 82 | I/O — User I/O pin |
| Pino 83 | I/O — User I/O pin |
| Pino 84 | I/O — User I/O pin |
| Pino 85 | VCC — 5V supply |
| Pino 86 | I/O — User I/O pin |
| Pino 87 | I/O — User I/O pin |
| Pino 88 | GND — Ground |
| Pino 89 | I/O — User I/O pin |
| Pino 90 | I/O — User I/O pin |
| Pino 91 | I/O — User I/O pin |
| Pino 92 | I/O — User I/O pin |
| Pino 93 | VCC — 5V supply |
| Pino 94 | I/O — User I/O pin |
| Pino 95 | I/O — User I/O pin |
| Pino 96 | GND — Ground |
| Pino 97 | I/O — User I/O pin |
| Pino 98 | I/O — User I/O pin |
| Pino 99 | I/O — User I/O pin |
| Pino 100 | I/O — User I/O pin |
| Pino 101 | VCC — 5V supply |
| Pino 102 | I/O — User I/O pin |
| Pino 103 | I/O — User I/O pin |
| Pino 104 | GND — Ground |
| Pino 105 | I/O — User I/O pin |
| Pino 106 | I/O — User I/O pin |
| Pino 107 | I/O — User I/O pin |
| Pino 108 | I/O — User I/O pin |
| Pino 109 | VCC — 5V supply |
| Pino 110 | I/O — User I/O pin |
| Pino 111 | I/O — User I/O pin |
| Pino 112 | GND — Ground |
| Pino 113 | I/O — User I/O pin |
| Pino 114 | I/O — User I/O pin |
| Pino 115 | I/O — User I/O pin |
| Pino 116 | I/O — User I/O pin |
| Pino 117 | VCC — 5V supply |
| Pino 118 | I/O — User I/O pin |
| Pino 119 | I/O — User I/O pin |
| Pino 120 | GND — Ground |
| Pino 121 | I/O — User I/O pin |
| Pino 122 | I/O — User I/O pin |
| Pino 123 | I/O — User I/O pin |
| Pino 124 | I/O — User I/O pin |
| Pino 125 | VCC — 5V supply |
| Pino 126 | I/O — User I/O pin |
| Pino 127 | I/O — User I/O pin |
| Pino 128 | GND — Ground |
| Pino 129 | I/O — User I/O pin |
| Pino 130 | I/O — User I/O pin |
| Pino 131 | I/O — User I/O pin |
| Pino 132 | I/O — User I/O pin |
| Pino 133 | VCC — 5V supply |
| Pino 134 | I/O — User I/O pin |
| Pino 135 | I/O — User I/O pin |
| Pino 136 | GND — Ground |
| Pino 137 | I/O — User I/O pin |
| Pino 138 | I/O — User I/O pin |
| Pino 139 | I/O — User I/O pin |
| Pino 140 | I/O — User I/O pin |
| Pino 141 | VCC — 5V supply |
| Pino 142 | I/O — User I/O pin |
| Pino 143 | I/O — User I/O pin |
| Pino 144 | GND — Ground |
| Pino 145 | I/O — User I/O pin |
| Pino 146 | I/O — User I/O pin |
| Pino 147 | I/O — User I/O pin |
| Pino 148 | I/O — User I/O pin |
| Pino 149 | VCC — 5V supply |
| Pino 150 | I/O — User I/O pin |
| Pino 151 | I/O — User I/O pin |
| Pino 152 | GND — Ground |
| Pino 153 | I/O — User I/O pin |
| Pino 154 | I/O — User I/O pin |
| Pino 155 | I/O — User I/O pin |
| Pino 156 | I/O — User I/O pin |
| Pino 157 | VCC — 5V supply |
| Pino 158 | I/O — User I/O pin |
| Pino 159 | I/O — User I/O pin |
| Pino 160 | GND — Ground |
| Pino 161 | I/O — User I/O pin |
| Pino 162 | I/O — User I/O pin |
| Pino 163 | I/O — User I/O pin |
| Pino 164 | I/O — User I/O pin |
| Pino 165 | VCC — 5V supply |
| Pino 166 | I/O — User I/O pin |
| Pino 167 | I/O — User I/O pin |
| Pino 168 | GND — Ground |
| Pino 169 | I/O — User I/O pin |
| Pino 170 | I/O — User I/O pin |
| Pino 171 | I/O — User I/O pin |
| Pino 172 | I/O — User I/O pin |
| Pino 173 | VCC — 5V supply |
| Pino 174 | I/O — User I/O pin |
| Pino 175 | I/O — User I/O pin |
| Pino 176 | GND — Ground |
| Pino 177 | I/O — User I/O pin |
| Pino 178 | I/O — User I/O pin |
| Pino 179 | I/O — User I/O pin |
| Pino 180 | I/O — User I/O pin |
| Pino 181 | TDI — JTAG test data in |
| Pino 182 | TMS — JTAG test mode select |
| Pino 183 | TCK — JTAG test clock |
| Pino 184 | TDO — JTAG test data out |
| Pino 185 | I/O — User I/O pin |
| Pino 186 | I/O — User I/O pin |
| Pino 187 | I/O — User I/O pin |
| Pino 188 | I/O — User I/O pin |
| Pino 189 | VCC — 5V supply |
| Pino 190 | I/O — User I/O pin |
| Pino 191 | I/O — User I/O pin |
| Pino 192 | GND — Ground |
| Pino 193 | I/O — User I/O pin |
| Pino 194 | I/O — User I/O pin |
| Pino 195 | I/O — User I/O pin |
| Pino 196 | I/O — User I/O pin |
| Pino 197 | VCC — 5V supply |
| Pino 198 | I/O — User I/O pin |
| Pino 199 | I/O — User I/O pin |
| Pino 200 | GND — Ground |
| Pino 201 | I/O — User I/O pin |
| Pino 202 | I/O — User I/O pin |
| Pino 203 | I/O — User I/O pin |
| Pino 204 | I/O — User I/O pin |
| Pino 205 | VCC — 5V supply |
| Pino 206 | I/O — User I/O pin |
| Pino 207 | I/O — User I/O pin |
| Pino 208 | GND — Ground |
Aplicações típicas
EPM9560RC208-17 é adequado para 7 aplicaçãos: 5V Industrial Glue Logic, Microprocessor Bus Address Decoding, Legacy Peripheral Interfacing (VME / ISA / PCI-derivative), State-Machine and Control Logic, Pin-Compatible Replacement for Legacy MAX 9000 Designs, DSP / Data Acquisition Subsystem Support, Telecom Backplane Control.
5V Industrial Glue Logic
The EPM9560RC208-17 is well suited to 5V industrial glue-logic consolidation, where it can replace multiple discrete 74LS/74HC logic ICs with a single programmable device. Its 560 macro cells and 212 user I/Os easily accommodate 30 to 50 SSI/MSI logic functions, while the deterministic 17 ns pin-to-pin delay guarantees critical timing for handshaking and arbitration paths. Designers route legacy 5V control signals into the 208-pin RQFP and implement the logic in Altera MAX+PLUS II or Quartus II. Compared to FPGA-based replacements, the MAX 9000 family offers instant-on behavior because the configuration is stored in on-chip EEPROM, eliminating external boot memory and reducing BOM cost.
Recomendado
Microprocessor Bus Address Decoding
The EPM9560RC208-17 is widely used to decode the address bus of 16-bit and 32-bit microprocessors such as the 80C186, 68SEC000, or MIPS-style CPUs, generating chip-select and wait-state signals for memory banks and peripherals. With 560 macro cells, designers can implement full address-decode trees, interrupt controllers, and bus-arbiter logic in a single CPLD. The 212 I/O pins on the 208-pin RQFP package comfortably support 24-bit address buses plus 16-bit data buses plus control signals. The 17 ns tPD provides adequate margin for 25 MHz 80C186 designs and slower MPUs, while the EE-based configuration ensures deterministic behavior from power-on.
Recomendado
Legacy Peripheral Interfacing (VME / ISA / PCI-derivative)
The EPM9560RC208-17 is used to bridge legacy peripheral interfaces such as VMEbus, ISA, and CompactPCI-derivative buses in mature industrial and telecom equipment. Its 560 macro cells implement bus-state machines, parity generators, and timing-control logic, while 212 I/O pins handle the wide parallel buses typical of these architectures. The 17 ns speed grade is well-matched to 8 MHz ISA and 16-bit VME transfers. The in-system JTAG programming interface allows field firmware updates without removing the CPLD from the board, an essential feature for sustaining engineering of installed telecom and factory-automation systems.
Recomendado
State-Machine and Control Logic
The EPM9560RC208-17 supports large multi-state control machines for industrial controllers, motor drives, and instrumentation front-ends. The 16 LABs and continuous routing fabric of the MAX architecture mean that 20 to 30 state variables can be implemented without routing congestion or speed degradation. Designers appreciate the 17 ns tPD consistency: state-to-state transitions take the same time regardless of the number of macro cells used, simplifying worst-case timing analysis. The 5V VCC core and 208-pin RQFP package make it thermally robust for enclosed industrial enclosures where junction temperatures can rise substantially.
Recomendado
Pin-Compatible Replacement for Legacy MAX 9000 Designs
The EPM9560RC208-17 serves as a sustaining-engineering replacement for legacy MAX 9000 designs whose original CPLDs have failed or become scarce. Because all EPM9560RC208 speed grades share the same 208-pin RQFP footprint, identical pinout, and 5V supply, this part drops into boards originally designed for the -15 or -20 grade without any PCB rework. Engineers should verify the timing budget against the original speed grade: the -17 grade is between -15 and -20, making it a near-universal substitute. The Altera/Intel MAX 9000 family is supported by Quartus II legacy versions and ByteBlaster/USB-Blaster JTAG programmers for in-system reprogramming.
Recomendado
DSP / Data Acquisition Subsystem Support
The EPM9560RC208-17 is used in DSP and data-acquisition subsystems to generate timing, address sequencing, and FIFO control signals. With 560 macro cells, it can implement address generators, dual-port RAM controllers, and trigger logic for multi-channel ADC systems. The 117.6 MHz maximum counter frequency supports sample-rate generators for audio and industrial data acquisition, while the 212 user I/Os accommodate wide parallel data buses from ADCs such as the AD976 or AD9220 family. The 5V I/O capability is useful when interfacing to legacy bipolar signal-conditioning chains that produce signals above 3.3V CMOS levels.
Recomendado
Telecom Backplane Control
The EPM9560RC208-17 is deployed in legacy telecom backplane controllers where it implements H.110 CT-bus clocks, TDM bus arbiters, and shelf-management logic. Its 212 I/Os comfortably support the multi-drop backplane connectors used in legacy ATCA and proprietary telecom shelves. The 17 ns tPD provides deterministic latency for time-division-multiplexed frame alignment, while the EEPROM-based configuration ensures the backplane controller is operational within microseconds of power-up - critical for hot-swap and shelf-replacement scenarios. The 208-pin RQFP package is well established in legacy telecom form factors, enabling direct board replacement.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para EPM9560RC208-17 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | EPM9560RC208-15 | EPM9560RC208-20 | EPM9560RC208-12 | EPM9560RC208-15N | EPM9560RC208-16 |
|---|---|---|---|---|---|---|
| Brand | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) |
| Package | 208-pin RQFP | 208-pin RQFP - same | 208-pin RQFP - same | 208-pin RQFP - same | 208-pin RQFP - same | 208-pin RQFP - same |
| Pin-to-Pin Delay (tPD) | 17 ns | 15 ns (-12%) | 20 ns (+18%) | 12 ns (-29%) | 15 ns (-12%) | 16 ns (-6%) |
| Usable Gates | 12,000 | 12,000 | 12,000 | 12,000 | 12,000 | 12,000 |
| Macro Cells | 560 | 560 | 560 | 560 | 560 | 560 |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Programming Technology | EEPROM (in-system) | EEPROM (in-system) | EEPROM (in-system) | EEPROM (in-system) | EEPROM (in-system) | EEPROM (in-system) |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND | NRND |
| Unit Price (qty 1) | USD 95.00 | USD 80.00 (approx) | USD 105.00 (approx) | USD 125.00 (approx) | USD 82.00 (approx) | USD 88.00 (approx) |
Principais diferenciais
- Mid-range speed grade in mature MAX 9000 family (vs EPM9560RC208-15)
- 212 user I/O pins in legacy 5V architecture (vs EPM9480RC208-15)
- 5V VCC core with multi-voltage I/O bank support (vs EPM7256SRC208-10)
Notas de projeto
The EPM9560RC208-17 requires a stable 5V VCC supply with decoupling capacitors placed as close as possible to every VCC/GND pin pair. Use one 0.1 uF ceramic and one 10 uF tantalum per VCC pin, plus a single 100 uF bulk capacitor at the board entry point. According to the MAX 9000 datasheet, VCC rise time must be monotonic and under 100 ms to ensure proper power-on reset of the EEPROM-based configuration logic. Add a supervisory reset IC if the 5V rail has slow rise or significant noise during hot-plug events.
Estimated: At 5V VCC, all 212 I/Os switching at 10 MHz with 50 pF loads, the EPM9560RC208-17 in the 208-pin RQFP package dissipates approximately 1.5 to 2.0 W. The RQFP has a typical theta_JA of around 35 C/W in still air, leading to a junction-temperature rise of 53 to 70 C above ambient. In enclosed industrial enclosures, add forced-air cooling or thermal vias under the package thermal pad region to keep Tj below 100 C for reliable long-term operation.
Place the EPM9560RC208-17 with all decoupling capacitors on the same PCB layer, using wide power planes for VCC and a continuous ground plane for GND. Route high-speed clock signals (GCLK1, GCLK2) with controlled impedance and matched lengths to minimize skew. Keep JTAG signals (TDI, TMS, TCK, TDO) away from switching outputs to avoid noise coupling during in-system programming. The 208-pin RQFP package has a 0.5 mm pitch - follow standard fine-pitch QFP PCB design rules for land pattern and solder mask.
Do not confuse the EPM9560RC208-17 with the EPM9560ARC208-10: the A-suffix is the Altera (Intel) re-marked version, while RC denotes the original package code. Confirm the exact ordering code with the Altera/Intel part-number decoder before sourcing. Also note that the -17 speed grade is sometimes abbreviated as '17' without the dash in distributor part search tools; explicitly request 'RC208-17' when ordering to avoid receiving the wrong speed grade.
The MAX 9000 family I/O drivers have TTL-compatible thresholds but limited slew-rate control. For signals longer than 50 mm or with stubs, add 22 to 33 ohm series-termination resistors close to the EPM9560RC208-17 output pin to dampen reflections. For clock outputs, prefer using one of the two global clock (GCLK) pins rather than routing an internal signal as a clock, because GCLK paths have lower skew and tighter jitter than the PIA routing fabric.
Informações de conformidade
Compliance information for EPM9560 family is not present in the verified web data; engineers should request the latest material declaration from Intel/Altera legacy product support before specifying this part in new designs.
