HI5767/2CA - 10-Bit 20MSPS ADC with Internal Reference | Renesas
N.º da peça: HI5767/2CA ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $8.49 | $8,49 |
| 10 | $7.62 | $76,20 |
| 100 | $6.18 | $618,00 |
| 500 | $5.2 | $2.600,00 |
| 1.000 | $4.45 | $4.450,00 |
HI5767/2CA Visão geral
An analog-to-digital converter (ADC) is a data-acquisition component that converts a continuous analog input signal into a discrete digital code suitable for processing by a microprocessor, FPGA, or DSP. Within the broader signal chain, the ADC sits between the analog front end (amplifiers, filters, and multiplexers) and the digital back end, and it is a critical sub-category of data converters (ADCs/DACs). 10-bit pipeline ADCs such as the HI5767 target applications where 60-66 dB of dynamic range is adequate and where low power and high integration matter more than 14- or 16-bit precision.
The headline specifications of the HI5767/2CA include 10-bit resolution, a 20 MHz guaranteed sampling rate (40/60 MSPS variants exist in the same family), CMOS-process construction, an internal 2.5 V voltage reference, and a low-power architecture suitable for portable and industrial applications. The flash-style architecture and parallel word access deliver low-latency conversion suitable for digital-oscilloscope, CCD imaging, and IF-sampling subsystems.
The HI5767/2CA is fabricated in a low-power CMOS process and uses a pipelined multi-stage architecture with on-chip sample-and-hold, enabling wide analog input bandwidth and fast settling time. An integrated reference minimizes external BOM, while parallel CMOS outputs reduce interface complexity in FPGA or ASIC capture paths. The combination of 10-bit resolution and 20 MSPS throughput makes the part well-suited to communication, video, and instrumentation subsystems where cost-effective integration matters more than extreme dynamic range.
Typical applications for the HI5767/2CA include digital video acquisition, set-top box front ends, CCD imaging digitizers, ultrasound beam-formers, digital oscilloscopes, IF-sampling communication receivers, and industrial data-acquisition boards. The wide input bandwidth and integrated reference also make the converter attractive for low-power portable instrumentation and for medical imaging pre-processing pipelines.
When designing with the HI5767/2CA, pay close attention to analog input drive, reference decoupling, and clock jitter. The 10-bit pipeline architecture tolerates modest source impedance, but an input buffer is recommended when driving the ADC from a high-impedance front end. The integrated reference requires 0.1 uF decoupling on each reference pin as shown in the manufacturer datasheet typical-application circuit.
This page synthesizes distributor pricing, drop-in same-family and cross-brand ADC alternatives, and practical design notes for the HI5767/2CA beyond what is found in the manufacturer datasheet alone.
Alternativas drop-in para HI5767/2CA — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com HI5767/2CA (mesmo formato e footprint) — diferindo em Architecture, Package, Resolution, RoHS Status, Input Type.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
HI5714/7CB-T
✅ Drop-In✓ Em estoque
$9.2 / unidade
Ver ficha técnica →HI5767/4CA
✅ Drop-In✓ Em estoque
$10.2 / unidade
Ver ficha técnica →HI5767/6CA
✅ Drop-In✓ Em estoque
$3.4 / unidade
Ver ficha técnica →HI5766KCAZ
✅ Drop-In✓ Em estoque
$5.6 / unidade
Ver ficha técnica →ADS7825UG4
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
HI5767/2CA Classificações máximas e características elétricas
| Resolução | 10 bit |
| Taxa de amostragem | 20 MSPS (40/60 MSPS in family variants) |
| Architecture | CMOS Pipelined |
| Number of Channels | 1 |
| Conversion Method | Flash / Pipelined |
| Data Interface | Parallel CMOS, Word Access |
| Internal Voltage Reference | Yes (integrated) |
| Encapsulamento | 28-pin QSOP (PDSO28) |
| Tipo de montagem | Surface Mount |
| Manufacturer | Renesas (formerly Intersil, formerly Harris) |
| Status RoHS | unknown |
Guia de Configuração de Pinos do HI5767/2CA 28-pin qsop (pdso28)
Configuração de pinos para HI5767/2CA (pacote 28-pin qsop (pdso28)). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.
Nenhum dado detalhado de pinagem disponível para HI5767/2CA.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
HI5767/2CA é adequado para 7 aplicaçãos: Digital Video Digitizing, Set-Top Box Tuner Digitizer, CCD Imaging Digitizer, Digital Oscilloscope Front End, IF-Sampling Communication Receiver, Industrial Data Acquisition Card, Medical Imaging Pre-Processing.
Digital Video Digitizing
The HI5767/2CA's 10-bit resolution at 20 MSPS suits 4FSC digital video, progressive-scan SDTV and consumer recorder front ends. The integrated 2.5 V reference removes the external reference IC from the analog front end, simplifying the PCB while keeping the signal chain stable across long temperature excursions. Placed after an anti-alias filter and a low-noise gain stage, the converter outputs parallel CMOS data for an FPGA or ASIC video processor. The 20 MHz Nyquist comfortably handles composite and component SDTV, while the wide analog input bandwidth suppresses sample-rate-dependent gain droop.
Recomendado
Set-Top Box Tuner Digitizer
The HI5767/2CA delivers 20 MSPS into a QSOP-28 footprint suitable for IF-sampling in mid-tier set-top boxes and hybrid analog/digital tuner designs. The integrated voltage reference simplifies the BOM for cost-sensitive consumer products, while the parallel CMOS output interfaces directly to a low-cost FPGA or demodulator with no serializer overhead. The 10-bit dynamic range (~60 dB) is adequate for broadcast IF demodulation where adjacent-channel suppression is handled in the digital baseband. Drops in as a 20 MSPS option with higher-speed 40/60 MSPS siblings in the same footprint for premium tuner families.
Recomendado
CCD Imaging Digitizer
Camera, scanner, and CCD imaging front ends rely on 10-12 bit ADCs with low-noise integrated references to digitize correlated-double-sampled pixel streams. The HI5767/2CA provides 20 MSPS sample rate with an internal 2.5 V reference, eliminating the noise and drift typically introduced by an external reference IC. Its low-latency parallel CMOS output suits line-scan and area-array imaging pipelines at VGA/SVGA resolutions. Placed after a CCD-output buffer, the ADC feeds a camera-link or USB-Vision digital capture block.
Recomendado
Digital Oscilloscope Front End
Low-cost 10-20 MSPS ADC inputs are commonly used in mid-tier digital oscilloscopes, data loggers, and vibration analyzers where 60 dB of dynamic range is sufficient. The HI5767/2CA's integrated reference and parallel CMOS output keep the front-end BOM compact for sub-$1k bench instruments. Its 28-pin QSOP package fits behind a custom FPGA pin arrangement without ballooning PCB real estate. The wide analog input bandwidth supports 10-20 MHz oscilloscope front ends and helps capture fast transient edges.
Recomendado
IF-Sampling Communication Receiver
Software-defined radio and baseband IF-sampling architectures in 2.4 GHz WLAN, point-to-point microwave, and licensed-band narrowband radios use 10-bit ADCs at 20 MSPS to digitize 1-7 MHz IF signals. The HI5767/2CA's wide analog input bandwidth and low latency improve receiver dynamic range while the internal reference maintains gain stability over temperature. The parallel CMOS output connects directly to a DSP or FPGA for digital down-conversion and demodulation.
Recomendado
Industrial Data Acquisition Card
Multi-channel industrial data-acquisition (DAQ) boards use 10-12 bit ADCs for transducer measurement, vibration analysis, and machine-condition monitoring. The HI5767/2CA's 20 MSPS throughput and integrated reference simplify multi-card synchronization and minimize drift across rack-mount chassis. The QSOP-28 footprint accommodates high-density layouts where multiple ADC channels sit side-by-side with dedicated FPGA capture blocks. Supports low-power bench/DIN-rail DAQ designs in factory-automation systems.
Recomendado
Medical Imaging Pre-Processing
Portable medical imaging applications such as handheld ultrasound, low-cost optical coherence tomography (OCT), and biopsy-image digitizers use 10-12 bit ADCs at 20 MSPS to balance dynamic range with low power. The HI5767/2CA's integrated reference reduces analog front-end complexity and supports compact, lightweight designs critical for handheld medical instruments. The QSOP-28 footprint allows for a tight signal-chain layout that minimizes EMI pickup adjacent to the transducer array.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para HI5767/2CA — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | HI5714/7CB-T | HI5767/4CA | HI5767/6CA | HI5766KCAZ | ADS7825UG4 |
|---|---|---|---|---|---|---|
| Brand | Renesas Electronics (formerly Intersil, Harris) | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Texas Instruments |
| Package | 28-pin QSOP (PDSO28) | 28-pin QSOP - same | 28-pin QSOP - same | 28-pin QSOP - same | 28-pin QSOP - same | 28-pin QSOP - same |
| Resolution | 10 bit | 10 bit | 10 bit | 10 bit | 10 bit | 12 bit |
| Internal Reference | Yes (integrated 2.5 V) | Yes | Yes | Yes | Yes | External |
| Data Interface | Parallel CMOS, Word Access | Parallel CMOS | Parallel CMOS | Parallel CMOS | Parallel CMOS | Serial |
| Lifecycle Status | Obsolete | Active (some variants) | Obsolete (same die) | Obsolete (same die) | Obsolete | Active |
| Architecture | CMOS Pipelined | CMOS | CMOS Pipelined | CMOS Pipelined | CMOS | SAR |
Principais diferenciais
- Integrated 2.5 V internal voltage reference (vs ADS7825UG4)
- Higher sampling rate for video and IF (vs ADS7825UG4)
- Parallel word-access CMOS interface (vs ADS7825UG4)
Notas de projeto
Place the 0.1 uF reference-decoupling capacitors as close as possible to the VREF and VREFN pins of the HI5767/2CA. The internal voltage reference is sensitive to switching noise coupled through the analog ground plane. Keep digital output traces routed away from the reference and analog input pins to avoid code-correlated noise. A solid ground plane with a star connection at the ADC's GND pin is recommended.
The 28-pin QSOP package has a 0.025-inch lead pitch. Use a 4-layer PCB with a dedicated analog ground plane and a digital ground plane joined at a single point below the ADC's GND pin. Trace the analog input on the top layer surrounded by analog ground fill, and route parallel CMOS outputs on inner layers to control impedance. Keep the analog input trace length below 1 inch to minimize aperture errors.
A high-quality, low-jitter clock is critical for the HI5767/2CA. Estimated: 10-bit resolution at 20 MSPS tolerates up to ~3 ps rms clock jitter before SNR degradation becomes measurable. Source the clock from a dedicated oscillator or a low-jitter clock synthesizer rather than routing an FPGA LVCMOS output with shared power. If the clock must be shared, add a clock buffer to minimize duty-cycle distortion.
Do not operate the HI5767/2CA with analog inputs that exceed the supply rails. The CMOS input structure will undergo latch-up if the input sits outside the analog supply by more than 0.3 V. The integrated 2.5 V reference does not tolerate external loading; do not connect external resistive divider networks to VREF. If multiple voltage rails exist, power up the analog supply first and power down the digital supply last.
Informações de conformidade
Compliance data not present in the Verified Web Data; parts manufactured before 2006 may predate RoHS disclosure. HI5767/2CA datasheets do not list RoHS or REACH status. Contact Renesas or authorized distributors for an updated compliance certificate.
