STMicroelectronics

LM2904WPT - Dual Low-Power Op Amp | STMicroelectronics

N.º da peça: LM2904WPT ✓ Ativo
Single supply Vdss 8-TSSOP Package Internal Speed
MOQ: 1 |

LM2904WPT Visão geral

The STMicroelectronics LM2904WPT is a dual, general-purpose operational amplifier in an 8-TSSOP package. The device contains two independent, high-gain operational amplifiers with internal frequency compensation and is designed for automotive and industrial control systems. According to the manufacturer datasheet description, the LM2904W and LM2904AW circuits operate from a single power supply over a wide range of voltages, while the low power-supply drain remains independent of the magnitude of the supply voltage.

The LM2904 family belongs to the operational amplifier hierarchy: dual operational amplifier -> general-purpose amplifier -> analog signal-conditioning IC -> semiconductor. Its internally compensated architecture simplifies implementation because an external compensation capacitor is not required for closed-loop operation in typical voltage-follower and inverting-amplifier configurations. The two independent amplifiers can also be used in separate signal chains within the same circuit.

The LM2904WPT is identified in the product listings as a 2-circuit, single-ended amplifier in an 8-TSSOP package. The related LM2904AW variant is also documented for automotive and industrial applications. Low power-supply drain, wide single-supply operation, and internal frequency compensation make this family suitable for sensor conditioning, control-loop amplification, audio and instrumentation interfaces, and general industrial electronics.

Because the LM2904WPT is a general-purpose amplifier, application performance depends on the selected gain, feedback network, supply voltage, load, and operating temperature. The datasheet should be consulted for the exact input common-mode range, output swing, input bias current, input offset voltage, supply-current limits, and thermal limits before final circuit sign-off.

For PCB implementation, route the two amplifier sections with short feedback paths, keep input and output nodes away from switching nodes, and place supply-bypass capacitors close to the device pins. A common ground reference and adequate copper area help preserve signal integrity in low-level analog circuits.

This page summarizes the verified device identity, package, application positioning, drop-in sourcing options, and practical design considerations that are useful when evaluating the LM2904WPT for a new analog design.

Alternativas drop-in para LM2904WPT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com LM2904WPT (mesmo formato e footprint) — diferindo em Number of Circuits, Package, REACH Status, RoHS Status.

STMicroelectronics
Number of Circuits: 2 circuits
Package: 8-SOIC
REACH Status: Compliant
Comparar com LM2904WPT →

LM2904WPT

✅ Drop-In
STMicroelectronics
📦 8-TSSOP-B
STMicroelectronics · Dual general-purpose operational amplifier · 2 · Single-ended · 8-TSSOP · Surface mount · Single supply

Consulte o preço

Ver ficha técnica →

LM2904YDT

✅ Drop-In
STMicroelectronics
📦 8-TSSOP
General-purpose operational amplifier · 2 channels · 2 circuits · Dual independent operational amplifier · Low-power · 30 V · 0.6 V/µs · Single-ended

Consulte o preço

Ver ficha técnica →

LM2904WPT Classificações máximas e características elétricas

Manufacturer STMicroelectronics
Device Type Dual general-purpose operational amplifier
Number of Circuits 2
Topologia Single-ended
Encapsulamento 8-TSSOP
Tipo de montagem Surface mount
Supply Configuration Single supply
Voltage Gain High gain; exact value not stated in the product listing
Frequency Compensation Internal
Supply Voltage Range Wide single-supply range; exact limits not stated in the product listing
Supply Drain Low power-supply drain, independent of supply-voltage magnitude
Automotive Application Designed for automotive and industrial control systems
Status RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_qualified
Datasheet Page Count 19 pages in the listed PDF document

Configuração de pinos do LM2904WPT

TSSOP-8 Package Pinout Diagram TSSOP-8 8-pin thin shrink small outline, P0.65mm, JEDEC MO-153. 1 8 2 7 3 6 4 5 TSSOP-8
Pino 1 OUT A — Output of amplifier A
Pino 2 IN- A — Inverting input of amplifier A
Pino 3 IN+ A — Non-inverting input of amplifier A
Pino 4 V- — Negative supply connection
Pino 5 IN+ B — Non-inverting input of amplifier B
Pino 6 IN- B — Inverting input of amplifier B
Pino 7 OUT B — Output of amplifier B
Pino 8 V+ — Positive supply connection

Aplicações típicas

LM2904WPT é adequado para 6 aplicaçãos: Industrial Sensor Signal Conditioning, Automotive Control Module Amplification, Power Supply Feedback and Control Loops, Audio Preamplifier Stages, Instrumentation and Measurement Interfaces, Low-Power Embedded Control Interfaces.

🏭

Industrial Sensor Signal Conditioning

The LM2904WPT is suitable for conditioning low-level sensor signals in industrial control systems because it provides two independent, high-gain amplifier sections with internal frequency compensation. One section can amplify a bridge or transducer signal while the other provides gain, filtering, or buffering for a second channel. Its single-supply operation and low power-supply drain suit compact control boards where supply headroom is limited. The design still requires verification of the exact input common-mode range, output swing, offset voltage, and bias current in the manufacturer datasheet for the selected supply voltage.

🚗

Automotive Control Module Amplification

The LM2904W and LM2904AW family is expressly described by STMicroelectronics for automotive and industrial control systems, making the LM2904WPT applicable to low-speed control and conditioning circuits in electronic modules. Its two independent amplifiers can serve separate analog channels within the same package, reducing board area compared with two single amplifiers. Because automotive qualification and environmental requirements vary by ordering code, engineers should confirm the exact temperature grade, AEC-Q100 status, ESD behavior, and automotive qualification documentation rather than infer it from the family name.

⚡

Power Supply Feedback and Control Loops

The LM2904WPT can amplify voltage-feedback or current-sense signals in power-supply control loops using its high-gain, internally compensated amplifier sections. Internal frequency compensation avoids an external compensation capacitor in standard closed-loop configurations, while the low supply drain helps control auxiliary power consumption. Designers should place the amplifier close to the feedback divider or shunt element to minimize pickup, keep the feedback trace away from switching nodes, and verify stability against the crossover frequency and output capacitance of the power stage.

🎧

Audio Preamplifier Stages

The two independent LM2904WPT amplifier sections can implement separate audio preamplifier or mixing stages in consumer and industrial audio equipment. Their high gain supports resistive feedback networks, while internal frequency compensation simplifies ordinary inverting and non-inverting layouts. Performance depends on the feedback values, source impedance, and load, so the amplifier's input offset, bias current, noise, output swing, and stability into the intended load should be checked. A ground-plane arrangement that keeps both channels away from switching regulators and motor drive nodes is especially important in a mixed-signal audio board.

🖥️

Instrumentation and Measurement Interfaces

The LM2904WPT can serve as the first active stage in instrumentation interfaces where a transducer or resistive sensor produces a low-level differential or single-ended signal. Its internal frequency compensation supports straightforward closed-loop gain stages and reduces the number of external components, while the 8-TSSOP package keeps dual-channel designs compact. For instrumentation-grade accuracy, verify offset voltage, input bias current, common-mode range, drift, and open-loop behavior against the measurement budget, and use a shielded or guarded layout for high-impedance sensor inputs.

🧩

Low-Power Embedded Control Interfaces

The LM2904WPT fits embedded control boards that require two general-purpose analog channels without adding a high-performance amplifier that would raise cost or supply demand. One amplifier can condition a potentiometer or analog status input, while the other can drive a feedback signal or buffer a reference. The family-level low power-supply drain, single-supply capability, and internal compensation align well with compact embedded designs. Firmware-controlled gain selection should still avoid operating the amplifier outside its input and output ranges, and unused amplifier sections should be tied to a defined common-mode voltage.

What is the STMicroelectronics LM2904WPT?
The STMicroelectronics LM2904WPT is a dual general-purpose operational amplifier with two independent, high-gain amplifier sections, internal frequency compensation, and an 8-TSSOP package. The manufacturer describes the LM2904W and LM2904AW circuits for automotive and industrial control systems. Each amplifier can operate as a voltage follower, inverting amplifier, or non-inverting amplifier, subject to the electrical limits in the manufacturer datasheet.
Where can I download the LM2904WPT datasheet PDF?
The LM2904WPT datasheet PDF is available through the STMicroelectronics document listing at Datasheets.com, and a separate manufacturer-oriented listing is available on Mouser and DigiKey. The listed PDF is 332 kbytes and 19 pages. Use the datasheet pin-description table when assigning package pins and check the electrical characteristics tables for supply-voltage, common-mode, offset, and output-swing limits before final design release.
What is the LM2904WPT pinout?
The LM2904WPT is an 8-pin TSSOP containing two independent operational amplifiers. The exact pin names should be taken from the pin-configuration diagram in the manufacturer datasheet because the two sections use the same standard dual-op-amp footprint. When laying out the board, identify each amplifier's non-inverting input, inverting input, output, and supply pins before assigning PCB nets.
Can the ROHM LM2904WPT replace the STMicroelectronics LM2904WPT?
The ROHM LM2904WPT is listed with the same 8-TSSOP dual general-purpose amplifier identity, so it is a candidate for a second-source drop-in review. Confirm pin-for-pin function mapping, supply range, input common-mode behavior, offset voltage, bias current, and temperature limits against both manufacturers' datasheets before releasing a production substitution.
What is the best drop-in replacement for the STMicroelectronics LM2904WPT?
The ROHM LM2904WPT is the closest verified same-MPN drop-in candidate because it is offered under the identical 8-TSSOP ordering code. The available cross-reference listings identify compatible LM2904 products from multiple manufacturers, but the verified data does not establish every candidate's exact package and pinout. Use the Request a Quote form on this page for sourcing confirmation, and validate any alternative against the original datasheet.
LM2904WPT versus LM2904YDT: which part fits the design?
The LM2904WPT is identified in the verified listings as an 8-TSSOP device, while the LM2904YDT comparison result confirms that it is a different ordering code. Package, mounting, and pin-compatibility differences must be checked in the respective datasheets before substituting one for the other. If the PCB land pattern was created for 8-TSSOP, use a verified 8-TSSOP candidate rather than assuming a different package is pin compatible.
Is the LM2904WPT suitable for industrial control systems?
Yes. STMicroelectronics specifically describes the LM2904W and LM2904AW circuits as designed for automotive and industrial control systems. The LM2904WPT provides two internally compensated amplifiers in a compact surface-mount package, making it appropriate for low-level signal conditioning, transducer amplification, and general control applications where single-supply operation and low supply drain are priorities.
Does the LM2904WPT need an external compensation capacitor?
No external compensation capacitor is normally required because the LM2904W and LM2904AW amplifier cores use internal frequency compensation. The compensation arrangement is one of the family features cited in the manufacturer document listing. Follow the datasheet's recommended feedback values and stability guidance for the selected closed-loop gain, particularly in capacitive-load or noisy-reference designs.
What are the key specifications of LM2904WPT that engineers should know?
The verified identity is a 2-circuit, single-ended general-purpose operational amplifier in an 8-TSSOP package. The two amplifier sections are independent, high gain, and internally frequency compensated, and the circuit operates from a single supply across a wide voltage range. The datasheet also states that low power-supply drain is independent of the magnitude of the supply voltage.
Can I use the LM2904WPT in a voltage-follower configuration?
Yes, the LM2904WPT can be used in a voltage-follower configuration because it is a high-gain, internally compensated dual operational amplifier. Connect the inverting input to the output and drive the non-inverting input with the signal to be buffered. Verify the input common-mode range and output swing at the intended supply voltage, and check capacitive-load stability if the source has high capacitance.
How should I decouple the LM2904WPT power supply?
Place the supply-bypass capacitor as close as practical to the device supply and ground pins, and follow the decoupling layout shown in the manufacturer datasheet. Keep analog input and output traces short and away from switching nodes and high-current return paths. Because both amplifiers share package pins, careful ground-return planning helps prevent channel-to-channel coupling through common supply or ground impedance.
What is the power consumption of the LM2904WPT?
The LM2904W family is characterized by low power-supply drain that remains independent of the magnitude of the supply voltage, as stated in the manufacturer description. The exact quiescent current depends on the specific LM2904WPT variant, supply voltage, and temperature. Use the individual-channel current and total supply-current limits in the manufacturer datasheet for thermal and battery-budget calculations.
Can LM2904WPT replace an LM324 in the same circuit?
Not automatically. The LM2904WPT is a dual amplifier in an 8-TSSOP package, while an LM324 implementation may use a 14-pin package and has different bias-current, common-mode, and output-swing characteristics. Some dual devices use the familiar 8-pin op-amp land pattern, but the exact alternate part and its pin functions must be verified. Confirm the footprint, supply range, input bias current, and load-drive capability before substituting.
How do I choose between the LM2904WPT and a newer dual op amp?
Choose the LM2904WPT when a general-purpose dual amplifier, single-supply operation, internal frequency compensation, and the established 8-TSSOP footprint are the priorities. Choose a newer device when the application requires lower offset, lower bias current, faster slew rate, rail-to-rail output, lower noise, or a smaller package. Confirm that the alternative retains the required input range, output swing, supply voltage, and stability margin.
Where can I buy LM2904WPT and check current lead time?
Use the Request a Quote form on this page to request the current LM2904WPT price, stock position, minimum order quantity, and lead time for the STMicroelectronics 8-TSSOP version. The same ordering code is also associated with an ROHM listing, so specify the manufacturer explicitly if a second source is acceptable. Confirm the package, manufacturer, and date code on the order acknowledgement.
What can replace the LM2904WPT?
The ROHM LM2904WPT is the strongest verified same-MPN candidate for a drop-in review because both listings identify an 8-TSSOP dual general-purpose amplifier. Other LM2904-family devices from additional manufacturers appear in cross-reference listings, but package and pin compatibility must be confirmed individually. Treat an unmatched package or a different rail-to-rail capability as a functional alternative rather than a drop-in replacement.
Is the LM2904WPT RoHS compliant?
The RoHS status for the LM2904WPT cannot be confirmed from the verified product snippets alone. Request the current manufacturer material-declaration or compliance document through the Request a Quote form on this page, or check the manufacturer's product documentation for the exact ordering code. Do not assume automotive or industrial suitability implies RoHS, REACH, or AEC-Q100 qualification.

Dados de referência de engenharia para LM2904WPT — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the STMicroelectronics LM2904WPT when the design needs two independent, general-purpose, internally compensated amplifiers in an 8-TSSOP package and single-supply operation is sufficient. It is a practical fit for industrial control, general signal conditioning, feedback loops, and auxiliary embedded interfaces where a low-noise precision amplifier would add unnecessary cost. Consider the ROHM LM2904WPT when a second source with the identical ordering code is valuable, after comparing offset, bias current, common-mode range, output swing, supply current, and temperature limits. Consider the LM2904YDT only after confirming that its suffix-specific ratings and temperature grade satisfy the design. For new precision or high-speed designs, choose a modern amplifier instead when rail-to-rail output, low offset, low bias current, fast slew rate, or improved noise performance is required.

Comparação com alternativas

Parâmetro Este produto LM2904WPT LM2904YDT
Brand STMicroelectronics ROHM Semiconductor STMicroelectronics
Package 8-TSSOP 8-TSSOP-B 8-TSSOP
Number of Amplifiers 2 2 2
Amplifier Class General purpose General purpose General purpose LM2904 family
Frequency Compensation Internal Internal for the LM2904W family Internal for the LM2904 family
Supply Configuration Single supply Single supply Single supply
Supply Drain Low and independent of supply-voltage magnitude Low; exact limit depends on manufacturer device specification Low; exact limit depends on suffix specification
Application Positioning Automotive and industrial control systems General-purpose dual amplifier General-purpose LM2904-family dual amplifier
RoHS Status unknown unknown unknown

Principais diferenciais

  • Verified identical ordering code from a second manufacturer (vs ROHM Semiconductor LM2904WPT)
  • Family-level internal frequency compensation (vs STMicroelectronics LM2904YDT)
  • Dual independent amplifiers in a compact surface-mount package (vs ROHM Semiconductor LM2904WPT)
  • Single-supply operation with supply-independent low drain (vs STMicroelectronics LM2904YDT)

Notas de projeto

Place the supply-bypass capacitor immediately adjacent to the LM2904WPT supply and ground pins, and keep feedback traces short and direct. Place both amplifier sections on the same side of the board where practical so their ground returns share a low-impedance path. Avoid routing inputs and outputs beneath or beside switching-regulator nodes, relay contacts, and high-current motor returns because capacitive coupling can turn a stable closed-loop stage into an oscillator.

Do not assume that every LM2904 ordering code is an exact drop-in replacement solely because the family name matches. Check pin functions, supply-voltage limits, input common-mode range, output swing, input offset voltage, input bias current, quiescent current, and temperature grade. For a non-inverting amplifier, confirm that the input and output remain inside the permitted ranges at the intended supply voltage; for an inverting amplifier, confirm that the non-inverting input is biased within the common-mode range.

Use the lowest practical feedback resistance that keeps the required gain and bandwidth. Excessively large resistors increase sensitivity to input-bias-current error, leakage, and noise, while excessively small values can load the source and increase power consumption. High-impedance sensor nodes should be guarded, and a driven shield or nearby ground reference can help reduce pickup when the sensor output impedance is high.

Budget supply current for both amplifier sections, not only the active channel, because the family description identifies low supply drain that is independent of supply-voltage magnitude but does not imply that the second section can be ignored. Verify total quiescent and output-current requirements at the maximum operating temperature. Where possible, keep unused amplifier inputs biased at a defined common-mode voltage rather than allowing them to float.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Qualified
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The family is described for automotive and industrial control systems, but the verified snippets do not confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for the exact LM2904WPT ordering code. Request current compliance documentation from the manufacturer through the Request a Quote form on this page.

Buscas relacionadas

LM2904WPT datasheet LM2904WPT datasheet pdf LM2904WPT pinout LM2904WPT 8-TSSOP STMicroelectronics LM2904WPT LM2904WPT equivalent LM2904WPT replacement LM2904WPT drop-in replacement LM2904WPT cross reference LM2904WPT vs LM2904YDT LM2904WPT dual op amp LM2904WPT industrial control LM2904WPT price LM2904WPT stock ROHM LM2904WPT

Componentes & termos relacionados

STMicroelectronics LM2904WPT ROHM Semiconductor LM2904WPT LM2904YDT LM2904W LM2904AW dual operational amplifier general-purpose amplifier analog signal-conditioning IC semiconductor single-supply operation internal frequency compensation voltage gain input common-mode range output swing input offset voltage input bias current low power-supply drain 8-TSSOP TSSOP package family surface mount SMD industrial control systems automotive control systems sensor signal conditioning
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ